Spelling suggestions: "subject:"regenerative medicine"" "subject:"degenerative medicine""
11 |
Targeted differentiation of embryonic stem cells towards the neural fate. / CUHK electronic theses & dissertations collectionJanuary 2009 (has links)
Embryonic stem (ES) cells, which possess proliferating and differentiating abilities, are a potential source of cells for regenerative medicine. Nowadays, the challenge in using ES cells for developmental biology and regenerative medicine has been to direct the wide differentiation potential towards the derivation of a specific cell fate. This study is aimed to establish a simple and efficient method to derive ES cells into neural lineage cells and examine the safety and efficacy of derived cells in a mouse ischemic stroke model. To explore the underlying mechanisms responsible for lineage commitment of stem cells, Notch signaling and serotonin responses are also studied. / In a non-contact coculture system, mouse ES cells (D3 and E14TG2a) were cocultured with the stromal cells MS5 for eight days. On the other hand, human ES cells (H9 and H14) were directly cocultured with MS5 in a contact manner for two weeks. Derived cells were further propagated in a serum-free medium and selected subsequently in a differentiating medium. The cell viability, numbers, phenotypes and lineage-specific gene expression profile were evaluated at stages of induction, propagation and selection. / In vivo, behavioral assessments of ischemic mice after transplantation of mouse ES cell derivatives revealed a significant improvement in spatial learning and memory ability as compared to ischemic mice without cell therapy. Histology of brain sections of transplanted mice demonstrated the migration of BrdU+ cells to the CA1 region of the hippocampus, which was evident of both an increase of pyramidal neuron density and normalized morphology. Teratoma development was found in one out of 17 transplanted mice. / MS5 was noted to express genes encoding neurotrophins and neuroprotective factors. Functional tests showed that MS5 exerted neurotrophism on neuroblastoma cell lines (SK-N-AS, SH-SY5Y, and SK-N-MC) and ES cells. The numbers of viable cells and the proportion of neural subtypes derived from ES cells at three stages of the culture system were significantly higher than those of the control cultures without MS5 induction, respectively. MS5 cocultures generate a relatively higher yield of neural lineage cells but select against the mesodermal and endodermal lineage derivatives. Together with non-contact MS5 coculture, serotonin could further increase the proportion of neural precursors and accelerate maturation of neural progenitor cells in a synergistic manner. During the induction phase with non-contact MS5 coculture, the Notch inhibitor could significantly decrease the number of derived neural precursors and instigate non-neural differentiation. With the supplement of the Notch inhibitor, serotonin could neither promote the expression of neuroectodermal genes nor enhance the proportion of neural precursors in MS5-cocultured ES cells. Notably, in the propagation of undifferentiated human ES cells, Notch signaling was also found to play an active role in maintaining cell survival. / The Notch inhibitor (gamma-secretase inhibitor) and serotonin were supplemented into induction cultures to investigate the roles of Notch signaling and the neurotransmitter serotonin in neural differentiation. For in vivo study, mouse ES cell-derived cells were labeled with BrdU and implanted onto the caudate putamens of mice having undergone transient occlusion of bilateral common carotid arteries and reperfusion to induce cerebral ischemia. Spatial learning and memory ability of transplanted mice were assessed in a water maze system. Histological assessment was also conducted on brain sections of mice three weeks post transplant to examine the migration and homing of implanted cells. / This study describes a simple and efficient differentiation protocol to derive mouse ES cells and human ES cells into neural lineage cells. Derived cells appear to significantly improve cognitive functions in a mouse ischemic stroke model. Data of the study suggest that MS5 cells may exert a neurotrophic effect on ES cells. With MS5 coculture, serotonin synergistically promotes neural commitment and facilitates maturation of derived neural precursors in ES cell cultures. In contact coculture with MS5, Notch signaling is shown to play a role in the directed neural differentiation of human ES cells, whereas in maintenance culture, Notch signaling is also important to cell survival of human ES cells. Thus, Notch signaling through cell-cell interaction may explain, at least partially, the difference between mouse ES cells and human ES cells in cell growth ability when seeded at low cell densities. / Yang Tao. / Adviser: Ho Keung Ng. / Source: Dissertation Abstracts International, Volume: 70-09, Section: B, page: . / Thesis submitted in: November 2008. / Thesis (Ph.D.)--Chinese University of Hong Kong, 2009. / Includes bibliographical references (leaves 161-194). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstracts in English and Chinese. / School code: 1307.
|
12 |
Characterization of silk proteins from African wild silkworm cocoons and application of fibroin matrices as biomaterialsMhuka, Vimbai 11 1900 (has links)
Challenges in treating injuries, together with an increased need for repair of damaged tissues and organs, have made regenerative medicine a major research area today. Biomaterials such as silk fibroin (SF) have proven to be excellent tissue scaffolds possessing properties essential in tissue engineering such as biocompatibility, biodegradability and exceptional mechanical properties. SF nanofibres are especially attractive due to their large surface-to-volume ratio and high porosity which is beneficial in regenerative medicine. However, to design biomaterial scaffolds, chemical and physical properties of SF have to be sufficiently known. The thesis aims to contribute to knowledge by characterizing silk fibroin from the African wild silkworm species Gonometa rufobrunnae, Gonometa postica, Argema mimosae, Epiphora bahuniae and Anaphe panda. Moreover, the feasibility of producing nanofibrous biomaterial scaffolds from these fibroins is explored.
The chemical composition of degummed fibres was investigated using Capillary electrophoresis whilst Infrared (IR) and Raman spectroscopic techniques were utilized to determine structural characteristics of the fibroin. In addition, thermal behaviour and mechanical properties of the fibroins were also investigated. Nanofibres were fabricated via electrospinning. The effects of solution concentration, voltage, polymer flow rate and tip to collector distance were studied to give optimum electrospinning conditions. IR spectroscopy was also utilized to observe the conformational structure of the degummed and electrospun fibres whilst scanning electron microscopy (SEM) provided information on the size and morphology of the fibres. The use of the nanofibres as biomaterials was evaluated using cytotoxicity tests.
Results showed that glycine, alanine and serine constituted over 70% of the amino acid composition of all the fibroins. Gonometa fibroin had more glycine than alanine whilst the opposite was true for Argema mimosae, Epiphora bahuniae and Anaphe panda fibroin. The abundance of basic amino acids in Gonometa rufobrunnae, Gonometa postica, Argema mimosae and Epiphora bahuniae fibroin makes them prime candidates for cell and tissue culture. The amino acid composition of the fibroins influenced secondary structure as the β-sheet structure. Anaphe panda, Argema mimosae and Epiphora bahuniae silks was made up of mostly alanine-alanine (Ala-Ala)n polypeptides whilst Gonometa fibroin had an interesting mixture of both glycine-alanine (Gly-Ala)n and (Ala-Ala)n units. The unique structures impacted the mechanical and thermal properties of the fibroins.
Production of Gonometa nanofibres was mainly dependent on fibroin solution concentration. A minimum of 27 % w/v was needed to produce defect free nanofibres. Diameters of the electrospun fibres produced ranged from 300 to 2500 nm. IR spectroscopy data highlighted that the β-sheet conformation of degummed fibroin was degraded during the formation of the nanofibres rendering them water soluble. It was however possible to regenerate the β-sheet structure in the nanofibres by exposing them to various solvents. Cytotoxicity tests using Sulforhodamine B (SRB) assay demonstrated that the nanofibres were not toxic to cells, a major prerequisite for use as a biomaterial.
This thesis successfully provides useful data in an area that has been minimally explored. Results suggest that SF from African silkworm species offers diversity in properties and are therefore attractive for use as biomaterials, especially in cell and tissue engineering. As far as we could determine, we are the first to extend the use of fibroin from African silk species by producing Gonometa SF nanofibres that are of potential use as biomaterial scaffolds. / Chemistry / D. Phil. (Chemisty)
|
13 |
Characterization of silk proteins from African wild silkworm cocoons and application of fibroin matrices as biomaterialsMhuka, Vimbai 11 1900 (has links)
Challenges in treating injuries, together with an increased need for repair of damaged tissues and organs, have made regenerative medicine a major research area today. Biomaterials such as silk fibroin (SF) have proven to be excellent tissue scaffolds possessing properties essential in tissue engineering such as biocompatibility, biodegradability and exceptional mechanical properties. SF nanofibres are especially attractive due to their large surface-to-volume ratio and high porosity which is beneficial in regenerative medicine. However, to design biomaterial scaffolds, chemical and physical properties of SF have to be sufficiently known. The thesis aims to contribute to knowledge by characterizing silk fibroin from the African wild silkworm species Gonometa rufobrunnae, Gonometa postica, Argema mimosae, Epiphora bahuniae and Anaphe panda. Moreover, the feasibility of producing nanofibrous biomaterial scaffolds from these fibroins is explored.
The chemical composition of degummed fibres was investigated using Capillary electrophoresis whilst Infrared (IR) and Raman spectroscopic techniques were utilized to determine structural characteristics of the fibroin. In addition, thermal behaviour and mechanical properties of the fibroins were also investigated. Nanofibres were fabricated via electrospinning. The effects of solution concentration, voltage, polymer flow rate and tip to collector distance were studied to give optimum electrospinning conditions. IR spectroscopy was also utilized to observe the conformational structure of the degummed and electrospun fibres whilst scanning electron microscopy (SEM) provided information on the size and morphology of the fibres. The use of the nanofibres as biomaterials was evaluated using cytotoxicity tests.
Results showed that glycine, alanine and serine constituted over 70% of the amino acid composition of all the fibroins. Gonometa fibroin had more glycine than alanine whilst the opposite was true for Argema mimosae, Epiphora bahuniae and Anaphe panda fibroin. The abundance of basic amino acids in Gonometa rufobrunnae, Gonometa postica, Argema mimosae and Epiphora bahuniae fibroin makes them prime candidates for cell and tissue culture. The amino acid composition of the fibroins influenced secondary structure as the β-sheet structure. Anaphe panda, Argema mimosae and Epiphora bahuniae silks was made up of mostly alanine-alanine (Ala-Ala)n polypeptides whilst Gonometa fibroin had an interesting mixture of both glycine-alanine (Gly-Ala)n and (Ala-Ala)n units. The unique structures impacted the mechanical and thermal properties of the fibroins.
Production of Gonometa nanofibres was mainly dependent on fibroin solution concentration. A minimum of 27 % w/v was needed to produce defect free nanofibres. Diameters of the electrospun fibres produced ranged from 300 to 2500 nm. IR spectroscopy data highlighted that the β-sheet conformation of degummed fibroin was degraded during the formation of the nanofibres rendering them water soluble. It was however possible to regenerate the β-sheet structure in the nanofibres by exposing them to various solvents. Cytotoxicity tests using Sulforhodamine B (SRB) assay demonstrated that the nanofibres were not toxic to cells, a major prerequisite for use as a biomaterial.
This thesis successfully provides useful data in an area that has been minimally explored. Results suggest that SF from African silkworm species offers diversity in properties and are therefore attractive for use as biomaterials, especially in cell and tissue engineering. As far as we could determine, we are the first to extend the use of fibroin from African silk species by producing Gonometa SF nanofibres that are of potential use as biomaterial scaffolds. / Chemistry / D. Phil. (Chemisty)
|
14 |
Extending the Window of Use for Human Mesenchymal Stem Cell Seeded Biological SuturesCoffin, Spencer 29 April 2015 (has links)
Cell therapy, including human mesenchymal stem cell (hMSC) therapy, has the potential to treat different pathologies, including myocardial infarctions (heart attacks). Biological sutures composed of fibrin have been shown to effectively deliver hMSCs to infarcted hearts. However, hMSCs rapidly degrade fibrin making cell seeding and delivery time sensitive. To delay the degradation process, we propose using aprotinin, a proteolytic enzyme inhibitor that has been shown to slow fibrinolysis. This project investigated the effects of aprotinin on hMSCs and suture integrity. Viability of hMSCs incubated with aprotinin, examined using a LIVE/DEAD stain, was similar to controls. No differences in proliferation, as determined by Ki-67 presence, and were observed. hMSCs incubated in aprotinin differentiated into adipocytes, osteocytes, and chondrocytes, confirming multipotency. CyQuant assays were used to determine the number of cells adhered to fibrin sutures. The number of adhered cells was increased through aprotinin supplementation at Days 2, 3, and 5 time points. To examine the effect of aprotinin on suture integrity, sutures were loaded to failure to determine ultimate tensile strength (UTS) and modulus (E). Sutures exposed to aprotinin had higher UTS and E when compared to sutures exposed to standard growth media. Degradation of fibrin was quantified using an ELISA to quantify fibrin degradation products (FDP) and by measuring suture diameter. Fibrin sutures incubated in aprotinin had larger diameters and less FDP compared to the controls, confirming decreased fibrinolysis. These data suggest that aprotinin can reduce degradation of biological sutures, providing a novel method for extending the implantation window and increasing the number of cells delivered for hMSC seeded biological sutures.
|
15 |
How cells sense the matrix geometry : a novel nanopatterning approachDi Ciò, Stefania January 2017 (has links)
Tissue engineering and regenerative medicine aim to develop materials that mimic some of the characteristics of the tissue they are replacing and control the growth and proliferation of cells. Despite exceptional advances in the range and quality of materials used, much remains to discover about the processes regulating interfaces between cells and their surroundings, or at cell-material interfaces. In order to study and control such interactions, scientists have produced engineered matrices aiming to mimic some of the feature of natural extra-cellular matrix (biochemistry, geometry/topography and mechanical properties). In order to pattern 2D-nanofibers on relatively large areas and throughput, allowing comprehensive biological studies, we developed a nano-fabrication technique based on the deposition of sparse mats of electrospun fibres with different diameters. These mats are used as masks to grow cell resistant polymer brushes from exposed areas. After removal of the fibres, the remaining brushes define a quasi-2D fibrous pattern onto which ECM molecules such as fibronectin can be adsorbed. Chapter 2 includes details of the techniques used to produce and characterize the fibrous nanopattern. Chapter 3 is focused on cell phenotype observed on the different nanofibres sizes. Adhesion assays showed that cell spreading, shape and polarity are regulated by the size of fibres but also the density of the nanofibres, similarly to previous observations made on circular nanopatterns. We then focused on the study of focal adhesion formation and maturations on these nanofibres and the role of key proteins involved in the regulation of the adhesion plaque: integrins and vinculin. Cells expressing different integrins were found to sense the nanoscale geometry differently. Vinculin sensing is the topic of Chapter 4. Although vinculin recruitment dynamics was affected by the nanofibrous patterns and focal adhesions arrange differently on the nanofibres, this protein does not seem to mediate nanoscale sensing. In Chapter 5, we finally focused on the role of the actin cytoskeleton as a direct sensor of nanoscale geometry. A gradual decrease in stress fibre formation was observed as the nanofibres dimensions decrease. Live imaging also demonstrated that the geometry of the extracellular environment strongly affects cytoskeleton rearrangement, stress fibres formation and disassembly. We identify the role of cytoskeleton contractility as an important sensor of the nanoscale geometry. Our study provides a deeper insight in understanding cell adhesion to the extracellular environment and the role of the matrix geometry and topography on such phenomena, but also raises questions regarding the more detailed molecular sensory elements enabling the direct sensing of nanoscale geometry through the actin cytoskeleton.
|
16 |
Entrepreneurial behaviour and the development of entrepreneurial ecosystems under uncertainty : essays on regenerative medicine venturing at the university-industry boundaryJohnson, David January 2016 (has links)
Entrepreneurial ecosystems are an important economic consideration but remain an understudied phenomenon. In particular, research emphasising the role of the entrepreneur within entrepreneurial ecosystems is scant. Entrepreneurial universities, particularly the commercialisation activities by academic entrepreneurs, contribute to both the emergence and development of entrepreneurial ecosystems at the university-industry (U-I) boundary. Yet, an understanding of the links between university characteristics and micro-level cognition on entrepreneurial ecosystems remains limited. Furthermore, it is not clear how the dynamics of entrepreneurial ecosystems differ across different national geographies. Venture development at the U-I boundary is difficult and uncertain. Entrepreneurs must make decisions under intense ambiguity and make sense of the highly uncertain situation. Nowhere is this more evident than in knowledge and technology-intensive sectors, where venturing relies on entrepreneurial coping responses to uncertainty. However, little is known about how entrepreneurs cope with uncertainty, especially when uncertainty is irreducible. To progress understanding of entrepreneurial behaviour amidst uncertainty, and the emergence and development of entrepreneurial ecosystems at the U-I boundary, this PhD thesis investigates venturing in the field of regenerative medicine (regenmed). This is a particularly suited study context since regenmed commercialisation activities, which are driven by university-based stem cell research, are highly uncertain and the industry is still in a formative stage. This PhD thesis explores entrepreneurial behaviour amidst uncertainty and the development of entrepreneurial ecosystems at the U-I boundary. The thesis comprises of three empirical studies (essays) that can be read independently, however, together the essays provide an enhanced understanding of entrepreneurial behaviour and the development of entrepreneurial ecosystems at the U-I boundary. Essay 1 reveals how ecosystem participants make sense of venturing processes in a highly uncertain, technology-intensive field. It highlights the development of coping strategies during the sensemaking process, and illustrates an association between university entrepreneurial culture and coping strategies. A model of sensemaking process under uncertainty is presented and a typology of sensemaking types in uncertain ecosystems is proposed. Essay 2 is a cross-national study of entrepreneurial ecosystems in Edinburgh (UK) and Madison (USA). The study investigates the development of entrepreneurial ecosystems around two research-intensive universities, which have a long history in stem cell innovation. The essay highlights the effects of cultural artefacts on microlevel behaviours. The influence of behaviour and cognition on the development of entrepreneurial ecosystems is modelled. This reveals different development paths for similar ecosystems. Essay 3 explores the emergence and development of entrepreneurial ecosystems, and considers how these help drive technology-based economies. More specifically, the study explores technology transfer and contextual factors across three regenmed ecosystems (Edinburgh, Madison, and Moscow) to reveal the emergence of entrepreneurial ecosystems at the U-I boundary. Findings show that ecosystem and venture characteristics emerge from institutional characteristics, micro-level cognition and regional context. Additionally, university culture and entrepreneurial coping strategies generate a typology for spinouts within the ecosystem. Collectively, these three essays reveal novel phenomena explaining how ecosystem actors make sense of uncertainty and how this influences the emergence of entrepreneurial ecosystems at the U-I boundary. Additionally, they reveal the importance of context in the venturing process and in entrepreneurial ecosystem dynamics. This provides important contributions to theories of entrepreneurial behaviour, entrepreneurial ecosystems and technology transfer. These scholarly contributions impart important practical implications.
|
17 |
ESTABLISHMENT AND OPTIMAL CULTURE CONDITIONS OF MICRORNA-INDUCED PLURIPOTENT STEM CELLS GENERATED FROM HEK293 CELLS VIA TRANSFECTION OF MICRORNA-302S EXPRESSION VECTORTAKEI, YOSHIFUMI, KADOMATSU, KENJI, YASUDA, KAORI, KOIDE, NAOSHI 02 1900 (has links)
No description available.
|
18 |
A study of strength and vasoactivity in a tissue engineered vascular mediaSchutte, Stacey C. January 2009 (has links)
Thesis (M. S.)--Mechanical Engineering, Georgia Institute of Technology, 2009. / Committee Chair: Nerem, Robert M.; Committee Member: Gleason, Rudolf L.; Committee Member: Taylor, W. Robert; Committee Member: Vito, Raymond P.; Committee Member: Wang, Yadong.
|
19 |
Ingénierie tissulaire : Mise en oeuvre d’un procédé de fabrication d’une matrice oesophagienne biologique / Esophageal tissue engineeringLuc, Guillaume 16 December 2016 (has links)
Objectifs : L’objectif principal de ce travail était de fabriquer une matrice œsophagienne décellularisée tubulaire implantable dans un modèle porcin. Méthodes : Des œsophages de porcs étaient prélevés et décellularisés selon un protocole basé sur l’Acide Déoxycholique. La décellularisation devait être confirmée par analyse histologique et quantification de l’ADN résiduel. L’évaluation des Glycosaminoglycanes, des protéines de structures (Collagène, Elastine, Fibronectine et Laminine) était réalisée par étude histologique et immunohistochimique sur les MD. Les tests mécaniques étaient réalisés en traction circonférentielle, longitudinale, et à l’éclatement. La biocompatibilité des MD a été évaluée in vivo sur un modèle murin. L’ensemencement était réalisé par des Adipose Derived Stem Cells (ADSCs) appliquées sous forme de feuillets sur les MD tubulaires. L’efficience de la maturation des MD in vivo était réalisée sur un modèle murin. L’implantation des MD était faite après une œsophagectomie par laparotomie dans un modèle porcin. Résultats : 103 œsophages ont été décellularisés. Les MD ne présentaient pas de noyau résiduel et leur quantification d’ADN résiduel était inférieure à 50 ng/mg de tissu sec. Les caractéristiques biologiques (quantité, qualité et distribution) étaient préservées après la décellularisation. Le comportement mécanique des MD était similaire aux œsophages natifs. L’ensemencement par des ADSCs via l’application de feuillets sur les MD permettait une cellularisation des couches externes. La maturation dans le grand épiploon permettait la vascularisation des MD sans bénéfice d’un ensemencement préalable. L’œsophagectomie était réalisée sur 6 porcs. Un individu est décédé, et 4 porcs ont présenté des complications postopératoires. La régénération tissulaire des MD était confirmée un mois après leur implantation. Conclusion : La substitution œsophagienne par une MD après une œsophagectomie est réalisable sur un modèle porcin / Decellularized matrixes (DM) are commonly used to facilitate a constructive remodeling response in several types of tissue, including the esophagus. Surgical procedure of the esophagus is often complicated by stricture, but preclinical studies have shown that the use of a DM can mitigate stricture and promote a constructive outcome. Recognizing the potential benefits of DM derived from homologous tissue (i.e., site-specific ECM), the objective of the present study was to prepare, characterize, and assess the in-vivo remodeling properties of DM from porcine esophagus. The developed protocol for esophageal DM preparation is compliant with previously established criteria of decellularization and results in a scaffold that maintains important biologic components and an ultrastructure consistent with a good mechanical behavior. Stem cells remained viable when seeded upon the esophageal DM in vitro, and the in-vivo host response showed a pattern of constructive remodeling when implanted in soft tissue.
|
20 |
Control of polymer biochemical, mechanical, and physical properties for the rational design of retinal regenerative tissue scaffoldsWorthington, Kristan Sorenson 01 December 2014 (has links)
Although millions of individuals worldwide are affected by blinding retinal degenerative diseases, most have very few options for treatment and no hope for vision restoration. Induced pluripotent stem cell (iPSC) replacement therapies represent a promising treatment option, but their effectiveness is limited by an overall lack of physical support for injected cells. Stem cell scaffolds can be used to provide this support by serving as an attachment platform for cells before, during, and after implantation. Thus, the design of polymer scaffolds with appropriate biochemistry, mechanical properties, and morphology is a critical step toward developing feasible stem cell therapies for blinding eye diseases. In this work, we aim to design a regenerative scaffold for the retina and determine the interplay among these three key design parameters. First, the feasibility of using a synthetic scaffold to grow and differentiate iPSCs to neural progenitor cells is demonstrated. The porous and degradable poly(lactic-co-glycolic acid) scaffolds employed were able to support a greater density of differentiating iPSCS than traditional tissue culture plastic. Additionally, the power of chitosan, a naturally occurring polymer, to overcome the toxic effects of copper nanoparticles is described. For two different cell types, various doses, and several time points, chitosan coated copper nanoparticles were significantly less toxic than non-coated particles. The mechanical properties of the human retina and the effects of aging and disease were also estimated using measurements of compressive modulus in animal models. In order to reach a range similar to native tissue, polymer mechanical properties were controlled using cross-linking density and surfactant templating. The influence of morphology was studied by inducing polymer structure changes via surfactant templating. Morphology significantly influenced water uptake and compressive modulus for both cross-linked poly(ethylene glycol) (PEG) and cross-linked chitosan hydrogels. Surfactant templating did not negatively affect the biocompatibility of PEG hydrogels and slightly improved the ability of chitosan hydrogels to support the growth and differentiation of iPSCs. Overall we have demonstrated the ability to tune polymer structure, mechanical properties, and biochemistry. These results add to the growing body of research aimed to understand and control cell/material interactions for biomaterial optimization.
|
Page generated in 0.1141 seconds