abstract: There is never a better time for this study than now when Nigeria as a country is going through the worst time in power supply. In Lagos city about 12,000 tons of waste is generated daily, and is expected to increase as the city adds more population. The management of these waste has generated great concern among professionals, academia and government agencies. This study examined the regenerative management of organic waste, which accounts for about 45% of the total waste generated in Lagos. To do this, two management scenarios were developed: landfill methane to electricity and compost; and analyzed using data collected during field work and from government reports. While it is understood that landfilling waste is the least sustainable option, this study argued that it could be a viable method for developing countries. Using U.S EPA LandGEM and the IPCC model, estimates of capturable landfill methane gas was derived for three landfills studied. Furthermore, a 35-year projection of waste and landfill methane was done for three newly proposed landfills. Assumptions were made that these new landfills will be sanitary. It was established that an average of 919,480,928m3 methane gas could be captured to generate an average of 9,687,176 MW of electricity annually. This makes it a significant source of power supply to a city that suffers from incessant power outages. Analysis of composting organics in Lagos was also done using descriptive method. Although, it could be argued that composting is the most regenerative way of managing organics, but it has some problems associated with it. Earthcare Compost Company processes an average of 600 tons of organics on a daily basis. The fraction of waste processed is infinitesimal compared to the rate of waste generated. One major issue identified in this study as an obstacle to extensive use of this method is the marketability of compost. The study therefore suggests that government should focus on getting the best out of the landfill option, since it is the most feasible for now and could be a major source of energy. / Dissertation/Thesis / Masters Thesis Urban and Environmental Planning 2016

The current global scenario is such where impact on the environment is becoming a rising concern. Global automotive manufacturers have focused more towards hybrid and electric vehicles as both more aware customers and governmental legislation have begun demanding higher emission standards. One of the many ways that Volvo Car Group approaches this trend is by mild hybridization which is by assisting the combustion engine by a small electric motor and a battery pack. A smart energy management strategy is needed in order to get the most out of the benefits that hybrid electric vehicles offer. The main objective of this strategy is to utilize the electrical energy on-board in such a manner that the overall efficiency of the hybrid powertrain becomes as high as possible. The current implementation is such that the decision for using the on-board battery is non-predictive. This results in a sub-optimal utilization of the hybrid powertrain. In this thesis, a predictive energy optimization tool is developed to maximize the utility of hybridization and the practical implementation of this tool is investigated. The optimization considers both the capacity as well as the thermal loadconstraints of the battery. The developed optimization tool uses information about the route ahead together with convex optimization to produce optimal reference trajectories of the battery states. These trajectories are used in a real-time controller to determine the battery use by controlling the adjoint states in the Equivalent Consumption Minimization Strategy equation. This optimization tool is validated and compared with the baseline controller in a simulation environment based on Simulink. When perfect information about the road ahead is known, the average reduction in fuel consumption is 0.99% relative the baseline controller. Several issues occurring in the real implementation are explored, such as the limited computational speed and the length of the route ahead that can be predicted. For this reason the information input to the optimization tool is segmented and the resulting performance is investigated. For a 30 second segmentation of the future route information, the average saving in fuel consumption is 0.13% relative to the baseline controller. It is shown that the main factor limiting the amount of savings in fuel consumption is the introduction of the thermal load constraints on the battery. / Det nuvarande globala scenariot är sådant där miljöpåverkan håller på att bli en växande angelägenhet. Globala fordonstillverkare har fokuserat mer på hybrid- och elfordon, eftersom både mer medvetna kunder och statlig lagstiftning har börjat kräva högre emissionskrav. Ett av de många sätt som Volvo Car Group närmar sig denna trend är genom mild hybridisering genom att bistå förbränningsmotorn med en liten elmotor och ett batteripaket. En smart strategi för energihantering behövs för att få ut det mesta av de fördelar som hybrida elfordon erbjuder. Huvudsyftet med denna strategi är att utnyttja den elektriska energin ombord på ett sådant sätt att den totala effektiviteten hos hybriddrivlinan blir så hög som möjligt.Den nuvarande implementeringen är sådan att beslutet att använda det fordonsbaserade batteriet är inte-förutsägbart. Detta resulterar i en suboptimal användning av hybriddrivlinan. I denna avhandling är ett prediktivt Energioptimeringsverktyg utvecklat för att maximera nyttan av hybridisering och det praktiska implementerandet av detta verktyg undersöks. Optimeringen beaktar både kapaciteten och de termiska belastningsbegränsningarna hos batteriet. Det utvecklade optimeringsverktyg använder information om vägen framåt tillsammans medkonvex optimering för att producera optimala referenstrajektorier av batteritillståndet. Dessa trajektorier används i en realtidsstyrenhet för att bestämma batterianvändningen genom att kontrollera adjungerade tillstånden strategiekvationen för den ekvivalenta förbrukningsminimiseringen. Optimeringsverktyget verifieras och jämförs med den ursprungliga styrenheten i en simuleringsmiljö baserad på Simulink. När perfekt information om vägen framåt är känd, är den genomsnittliga minskningen av bränsleförbrukningen 0,99 % relativt den ursprungliga styrenheten. Flera frågor som uppstår i den verkliga implementeringen undersöks, såsom den begränsade beräkningshastigheten och längden på den väg framåt som kan förutses. Av denna anledning är segmenteras informationen till optimeringsverktyget och den resulterande prestandan undersöks. För en 30 sekunders segmentering av framtida väginformation är den genomsnittliga besparingen i bränsleförbrukningen 0,13 % i förhållande till den ursprungligastyrenheten. Resultaten visar att den viktigaste faktorn som begränsar bränsleförbrukningsbesparingen är införandet av de termiska belastningsbegränsningarna på batteriet.