Spelling suggestions: "subject:"renewable energy"" "subject:"renewable anergy""
201 |
Solar energy management system with supercapacitors for rural applicationRomli, Muhammad Izuan Fahmi January 2018 (has links)
Growing energy demands are expected to exceed the supply from current energy resources. Therefore, renewable energy and energy management systems will become more crucial for increasing supply and efficiency of energy usage. The novelty of this research is an energy management system (EMS) based on fuzzy logic for a solar house to ensure the maximum utilisation of renewable sources, protect components from being damaged due to overloading, and manage energy storage devices to increase stability in the power system. There is no published analysis of hybrid energy storage between battery and supercapacitor using fuzzy logic as EMS. The energy management system is implemented in a solar cabin system developed by IBC Solar to mimic a typical rural house. The solar cabin is equipped with solar photovoltaic panels, solar charger, battery and inverter. Supercapacitors and a custom made DC to DC converter were added to the system to support the batteries during high current load demand and manage energy flow. Three sets of experiments were conducted in the solar cabin system with the new energy management system. Power consumption usage of a typical rural household was studied to create two load profiles that were used as load for the experiments. The results show an efficiency of 95.9% by using the new energy management system and supercapacitors to the solar cabin, which is higher than recent research (95.2% and 84.4%). The result is on par with the Malaysian and International Standard in energy efficiency of around 95%. The energy management system controlled the charging and discharging of the battery and supercapacitor using fuzzy logic. The novelty of this thesis is use of supercapacitors to reduce stress on the battery and an energy management system to control and manage the system for efficient energy usage.
|
202 |
Computational Modeling of Tethered Undersea Kites for Power GenerationGhasemi, Amirmahdi 01 February 2018 (has links)
Ocean currents and tidal energy are significant renewable energy resources, and new concepts to extract this untapped energy have been studied in the last decades. Tethered undersea kite (TUSK) systems are an emerging technology which can extract ocean current energy. TUSK systems consist of a rigid-winged kite, or glider, moving in an ocean current. One proposed concept uses an extendable tether between the kite and a generator spool on a fixed or floating platform. As the kite moves across the current at high speeds, hydrodynamic forces on the kite tension the tether which extends to turn the generator spool. Since the TUSK system is a new technology, the process of bringing a TUSK design to commercial deployment is long and costly, and requires understanding of the underlying flow physics. The use of computational simulation has proven to be successful in reducing development costs for other technologies. Currently, almost all computational tools for analysis of TUSK systems are based on linearized hydrodynamic equations in place of the full Navier-Stokes equations. In this dissertation, the development of a novel computational tool for simulation of TUSK systems is described. The numerical tool models the flow field in a moving three-dimensional domain near the rigid undersea kite wing. A two-step projection method along with Open Multi-Processing (OpenMP) on a regular structured grid is employed to solve the flow equations. In order to track the rigid kite, which is a rectangular planform wing with a NACA-0012 airfoil, an immersed boundary method is used. A slip boundary condition is imposed at the kite interface to decrease the computational run- time while accurately estimating the kite lift and drag forces. A PID control method is also used to adjust the kite pitch, roll and yaw angles during power (tether reel-out) and retraction (reel-in) phases to obtain desired kite trajectories. A baseline simulation study of a full-scale TUSK wing is conducted. The simulation captures the expected cross-current, figure-8 motions during a kite reel-out phase where the tether length increases and power is generated. During the following reel-in phase the kite motion is along the tether, and kite hydrodynamic forces are reduced so that net positive power is produced. Kite trajectories, hydrodynamic forces, vorticity contours near the kite, kite tether tension and output power are determined and analyzed. The performance and accuracy of the simulations are assessed through comparison to theoretical estimations for kite power systems. The effect of varying the tether (and kite) velocity during the retraction phase is studied. The optimum condition for the tether velocity is observed during reel-in phase to increase the net power of a cycle. The results match theoretical predictions for tethered wind energy systems. Moreover, the effect of the tether drag on the kite motion and resulting power output is investigated and compared with the results of the baseline simulation. The kite drag coefficient increases by 25% while the effect of the tether drag is included into the baseline simulation. It affects the trajectory and the velocity of the kite. However, it has a small effect on the power generation for the proposed concept of TUSK system.
|
203 |
Mathematical modelling and control of renewable energy systems and battery storage systemsWijewardana, Singappuli M. January 2017 (has links)
Intermittent nature of renewable energy sources like the wind and solar energy poses new challenges to harness and supply uninterrupted power for consumer usage. Though, converting energy from these sources to useful forms of energy like electricity seems to be promising, still, significant innovations are needed in design and construction of wind turbines and PV arrays with BS systems. The main focus of this research project is mathematical modelling and control of wind turbines, solar photovoltaic (PV) arrays and battery storage (BS) systems. After careful literature review on renewable energy systems, new developments and existing modelling and controlling methods have been analysed. Wind turbine (WT) generator speed control, turbine blade pitch angle control (pitching), harnessing maximum power from the wind turbines have been investigated and presented in detail. Mathematical modelling of PV arrays and how to extract maximum power from PV systems have been analysed in detail. Application of model predictive control (MPC) to regulate the output power of the wind turbine and generator speed control with variable wind speeds have been proposed by formulating a linear model from a nonlinear mathematical model of a WT. Battery chemistry and nonlinear behaviour of battery parameters have been analysed to present a new equivalent electrical circuit model. Converting the captured solar energy into useful forms, and storing it for future use when the Sun itself is obscured is implemented by using battery storage systems presenting a new simulation model. Temperature effect on battery cells and dynamic battery pack modelling have been described with an accurate state of charge estimation method. The concise description on power converters is also addressed with special reference to state-space models. Bi-directional AC/DC converter, which could work in either rectifier or inverter modes is described with a cost effective proportional integral derivative (PID/State-feedback) controller.
|
204 |
THE INTEGRATION OF SOLAR GENERATION ON A POWER SYSTEM: OPERATIONAL AND ECONOMIC EVALUATIONMarco A. Velastegui Andrade (5930348) 16 January 2019 (has links)
<p>In recent
years, the accelerated deployment of renewable electricity generation resources,
especially wind and photovoltaic (PV) solar, has added challenges to the
operation and planning of the power grid.
One of the challenges is that the variability of solar and wind power
output may increase the variation of the load that must be followed by
dispatchable resources and increase the ramping capacity needs. Moreover, the
decision about the configuration of a PV solar generation systems has
operational and economic implications because peak solar energy production does
not always precisely occur when the wholesale electricity prices of the system
are highest. Therefore, as the renewable capacity levels grow, it becomes increasingly
important to examine the potential impacts on the system cost and portfolio of
conventional generating units to respond to the intermittent nature of some
renewable generation technologies. Three related analyses explored in this dissertation
address some of the challenges of integrating utility-scale PV solar and wind
projects into a power system using a case study for Indiana.</p>
<p>The first
analysis identifies the optimal azimuth and tilt angles of solar PV
installations that alternatively maximize the annual electricity generation or
the economic value of the resource. The economic implications of the
configuration of solar PV installations within Indiana are estimated based on wholesale
prices of electricity and simulated solar output for different combinations of
angles and types of array installations. The results show that solar projects
across the state would need to have azimuth angles within the 177 and 182
degrees range to obtain maximum annual energy and 180 to 190.5 degrees to maximize
annual value, independently of their array types. Furthermore, southern and
northwestern zones showed the highest impacts from using an optimal angle
configuration of the solar installations. Nevertheless, on average, the
benefits in annual electricity generated or economic value from their
reconfiguration across the state are minor, amounting to less than one percent.
</p>
<p>The second
analysis explores the effects of additional solar and wind power investments on
the 2035 requirements for baseload and peaking generation capacity, the amount
of energy supplied by various types of generation technologies and the costs of
Indiana’s electric supply system. From a capacity planning and unit
commitment/dispatch perspective, the results of this analysis indicated that
with a portfolio that includes more solar and/or wind power generation, there
would be need to add new peaking generation units. However, the total need for
additional peaking resources declines as more renewables are added to the
generation mix. Because Indiana still heavily relies on coal and other baseload
resources to generate electricity, no new baseload capacity is required in the
future. Generally, additions of PV solar and wind capacity amplify the
variation in load net of renewable generation and create greater needs for
ramping services from conventional units. However, results of the analysis show
that the existing portfolio of conventional generation resources in Indiana
would have sufficient operational flexibility to be able to accommodate ramping
requirements even with PV solar and wind capacity penetration levels as high as
30% of total electricity generation. However, at those levels of renewables
capacity there are a times during the year when the optimal operational
strategy is to curtail solar and wind generation. From a technical perspective,
the results indicated that larger thermal generating units are used more for
load following and turned on and off (cycled) more frequently with the
additional renewables than without them but mainly during days with low levels
of demand and high levels of generation from renewable technologies. From the
cost perspective, the results of the model support the idea that it would be
cheaper in the long-term to invest in a combination of solar and wind
generation resources than in solar generation resources alone. Moreover, the
reductions in variable costs, driven by the zero variable cost added to the
system by the additional solar and wind capacity, were not sufficient to
outweigh the increases in capital costs regardless of the levels of capacity
additions. </p>
<p>For the
third analysis, the proposed capacity expansion model was used to estimate the
value of capacity of PV solar and PV solar in combination with wind capacity in
terms of baseload/peaking resources from a deterministic system peak load
reliability perspective and for various penetration levels of these resources. The
capacity values of solar, which refer to the contribution of PV solar plants to
reliably meeting the system peak demand, for all the wind capacity levels
analyzed, fall as the amount of solar capacity increases. This is because as
solar generation increases and closely coincides with the occurrence of the
system peak load, there is a shift of the peak load net of renewable generation
time to later afternoon hours, when solar installations begin to reduce their
production, therefore decreasing their contribution to reliably meeting system
peak demand. The calculated solar capacity values are between 2.7% and 67.3% of
the corresponding solar nameplate capacity considering all zones and types of
PV solar arrays in Indiana, and vary with the level of solar penetration. The
range of values obtained are in line with the ones found in other studies using
stochastic reliability-based methods.</p>
<p>This dissertation contributes to
the literature on the interaction between PV solar with other generation
resources and to their economic, operational and policy implications.
Furthermore, it provides another decision-making tool from a planning perspective
for policymakers, utility companies and project developers.</p>
|
205 |
Functional catalysts by design for renewable fuels and chemicals productionShan, Nannan January 1900 (has links)
Doctor of Philosophy / Department of Chemical Engineering / Bin Liu / In the course of mitigating our dependence on fossil energy, it has become an urgent issue to develop unconventional and innovative technologies based on renewable energy utilization for fuels and chemicals production. Due to the lack of fundamental understanding of catalytic behaviors of the novel chemical compounds involved, the task to design and engineer effective catalytic systems is extremely challenging and time-consuming.
One central challenge is that an intricate balance among catalytic reactivity, selectivity, durability, and affordability must be achieved pertinent to any successful design. In this dissertation, density functional theory (DFT), coupled with modeling techniques derived from DFT, is employed to gain insights into molecular interactions between elusive intermediates and targeted functional catalytic materials for novel electrochemical and heterogeneous catalytic processes. Two case studies, i.e., electroreduction of furfural and step-catalysis for cyclic ammonia production, will be discussed to demonstrate the capability and utility of DFT-based theoretical modeling toolkits and strategies.
Transition metal cathodes such as silver, lead, and nickel were evaluated for furfuryl alcohol and 2-methylfuran production through detailed DFT modeling. Investigation of the molecular mechanisms revealed that two intermediates, mh6 and mh7 from mono-hydrogenation of furfural, are the key intermediates that will determine the product formation activities and selectivities. Nickel breaks the trends from other metals as DFT calculations suggested the 2-methylfuran formation pathway is most likely different from other cathodes. In this work, the Brønsted–Evans–Polanyi relationship, derived from DFT energy barrier calculations, has been found to be particularly reliable and computationally efficient for C-O bond activation trend predictions. To obtain the solvation effect on the adsorptions of biomass-derived compounds (e.g.,
furfural and glycerol), influence of explicit solvent was probed using periodic DFT calculations. The adsorptions of glycerol and its dehydrogenation intermediates at the water-platinum surface were understood via various water–adsorbate, water–water, and water–metal interactions. Interestingly, the bond-order-based scaling relationship established in solvent-free environment is found to remain valid based on our explicit solvent models.
In the second case study, step-catalysis that relies on manganese’s ability to dissociate molecular nitrogen and as a nitrogen carrier emerges as an alternative route for ammonia production to the conventional Haber-Bosch process. In this collaborative project, DFT was used as the primary tool to produce the mechanistic understanding of NH3 formation via hydrogen reduction on various manganese nitride systems (e.g., Mn4N and Mn2N). Both nickel and iron dopants have the potential to facilitate NH3 formation. A broader consideration of a wide range of nitride configurations revealed a rather complex pattern. Materials screening strategies, supported by linear scaling relationships, suggested the linear correlations between NHx (x=0, 1, 2) species must be broken in the development of optimal step catalysis materials. These fundamental findings are expected to significantly guide and accelerate the experimental material design.
Overall, molecular modeling based on DFT has clearly demonstrated its remarkable value beyond just a validation tool. More importantly, its unique predictive power should be prized as an avenue for scientific advance through the fundamental knowledge in novel catalysts design.
|
206 |
Numerical modelling of full scale tidal turbines using the actuator disc approachAbdul Rahman, Anas January 2018 (has links)
In recent years, the actuator disc approach which employs the Reynolds-Averaged Navier-Stokes (RANS) solvers has been extensively applied in wind and tidal energy field to estimate the wake of a horizontal axis turbine. This method is simpler to administer and requires moderate computational resources in modelling a tidal turbines rotor. Nonetheless, the use of actuator disc approximation in predicting the performance of tidal devices has been limited to studies involving an extremely small disc (e.g. rotor diameter of 0.1 meter). The drawback of a small scale actuator disc model is the overestimation of essential parameters such as the mesh density and the resolution of the vertical layers, making them impractical to be replicated in a regional scale model. Hence, this study aims to explore the methodology on implementation of the Three- Dimensional (3D) actuator disc-RANS model in an ocean scale simulation. Additionally, this study also aspires to examine the sensitivity of the applied momentum source term and its validity in representing full-size tidal devices. Nonetheless, before the effectiveness of an actuator disc in a regional model can be tested, tidal flow models for the area of interest needed to be set up first. This was essential for two reasons: (a) to ensure accurate hydrodynamic flow conditions at the deployment site were replicated, (b) to give confidence in the outputs produced by the regional scale actuator disc simulations, since in-situ turbine measurement data from a real deployment site were difficult to source. This research was undertaken in two stages; in the first stage, a numerical model which can simulate the tidal flow conditions of the deployment sites was constructed, and, in the second stage, the actuator disc method which is capable of modelling an array of real scale-sized tidal turbines rotors has been implemented. In the first stage, tidal flow simulations of the Pentland Firth and Orkney Waters (PFOW) were conducted using two distinct open-source software - Telemac3D, which is a finite element based numerical model, and Delft3D, which is a finite difference based model. Detailed methodologies in developing a 3D tidal flow model for the PFOW using both numerical models were presented, where their functionality, as well as limitations were explored. In the calibration and validation processes, both models demonstrated excellent comparison against the measured data. However, Telemac3D was selected for further modelling of the actuator disc considering the model's capability to perform parallel computing, together with its flexibility to combine both structured and unstructured mesh. In the second stage, to examine the actuator disc's accuracy in modelling a full size tidal device, the momentum source term was initially applied in an idealised channel study, where the presence of a 20-meter diameter turbine was simulated for both single and array configurations. The following parameters were investigated: (i) size of the unstructured mesh utilised in the computational domain, (ii) variation in disc's thickness, (iii) resolution of the imposed structured grid to represent turbine's enclosure, (iv) variation in the vertical layers, and (v) influence of hydrostatic and non-hydrostatic formulations on the models' outputs. It is to be noted that the turbine's support structures have not been included in the modelling. The predicted velocities and computed turbulence intensities from the models were compared against laboratory measurement data sourced from literature, where excellent agreement between the model outputs and the data from literature was observed. In essence, these studies highlighted the efficiency and robustness of the applied momentum source term in replicating the wake profiles and turbulence characteristics downstream of the disc, hence providing credence in implementing the actuator disc method for a regional scale application. Subsequently, the validated actuator disc method was applied to the Inner Sound region of the Pentland Firth to simulate arrays of up to 32 tidal turbine rotors. The wake development, flow interactions with the rotor arrays, and flow recovery at the Inner Sound region have been successfully mapped. Also, this study highlighted the importance of employing optimal numerical margins, specifically for the structured grid and horizontal planes, as both parameters were relevant in defining the disc's swept area. As published materials on the implementation of actuator disc approach within a regional scale model is still scarce, it was aspired that this work could provide some evidence, guidance and examples of suggested best practice in effort to fill the research gap in modelling tidal turbine arrays using the actuator disc approach.
|
207 |
Photon manipulation of electron transportation in Chlamydomonas reinhardtii algae using semiconductor lasersAl-Yasiri, Sadiq Jafar Khayoun January 2018 (has links)
The aim of this research was to increase the rate of cell division in algae by exploring the effect of combinations of lasers of various wavelengths. Literature search has identified a gap in knowledge of the potential for increase in efficiency of the electron transition between photosystem II and photosystem I. This through the use of several wavelengths of blue and or red lasers, including 405 nm, 450, and 473 nm, 635 nm, 650 nm, 680 nm, 685 nm and 700 nm to generate photons with energies more closely matching the absorption spectra of algae receptors known as pigments. This investigation underpins the realisation that photons emanating from a specific laser are absorbed by algae pigments because there is a much closer match between the emission spectrum of the laser and the absorption spectrum of the pigments within the photosystems of algae. This research examined all of the available laser wavelengths in particular combinations; the resultant data contributed to the assembly of a matrix that illustrates the most appropriate laser combinations that promote cell division within algae. Chlamydomonas reinhardtii algae cells successfully grew and divided under exposure to both the blue laser, red laser and that of white light LED when each was applied individually or combined in a sequence. The order of the sequence of using the red and blue lasers in specific cases was important. The pH was maintained between 6.9 and 7.7, with temperatures maintained between 19.00 and 25.00 ºC. For the blue lasers, the laboratory results were as follows, (irradiation time was 12 hours every time): • 405 nm blue laser produced 1.8 x cell division of the white light LED. • For 450 nm blue laser: the white light LED produced 1.5 x cell division of the blue laser 450 nm. • 473 nm blue laser produced 2 x cell division of the white light LED. • 405 nm blue laser produced 3.6 x cell division of natural day light. • 450 nm blue laser produced 1.4 x cell division of natural day light. • 473 nm blue laser produced 4 x cell division of natural day light. For the red lasers, the laboratory results were as follows, (irradiation time was 12 hours every time): • For 635 nm red laser: the white light LED produced 4 x cell division of the red laser 635 nm. • 650 nm red laser produced 1.96 x cell division of the white light LED. • 680 nm red laser produced 2.3 x cell division of the white light LED. • For 685 nm red laser: white light LED produced 1.22 x cell division of the red laser 685 nm. • 700 nm red laser produced 1.35 x cell division of the white light LED. • For 635 nm red laser: the natural day light produced 2 x cell division of the red laser 635 nm. • 650 nm red laser produced 3.9 x cell division of natural day light. • 680 nm red laser produced 4.6 x cell division of natural day light. • 685 nm red laser produced 1.6 x cell division of natural day light. • 700 nm red laser produced 2.7 x cell division of natural day light. For the combination of blue and red lasers, the laboratory results were as follows, (irradiation time was 12 hours every time): • First combination: 405 nm blue laser followed by a combination of 680 nm and 700 nm red lasers produced 4.86 x cell division of the white light LED. • Second combination: 473 nm blue laser followed by a combination of 680 nm and 700 nm red lasers produced 4.66 x cell division of the white light LED. • Third combination: a combination of 680 nm and 700 nm red lasers produced 4.43 x cell division of the white light LED.
|
208 |
The role of law in improving access to electricity through off-grid renewable energy in NigeriaOle, Ngozi Chinwa January 2018 (has links)
No description available.
|
209 |
Developing community energy projects : experiences from Finland and the UKMartiskainen, Mari January 2014 (has links)
Community energy has drawn interest from the general public, policy makers and researchers in the UK over the last few years. Community energy projects, such as energy saving measures and renewable energy projects, are usually organised by civil society groups rather than commercial businesses. This DPhil research approaches community energy as local grassroots innovation and compares its development in two different countries, Finland and the UK. Key research question is: Why and how do community energy projects develop and how do they contribute to niche development? The thesis uses Sustainability Transitions studies literature, especially literature on Strategic Niche Management (SNM), as a theoretical framing, and empirical in-depth analysis of four community energy projects, two in the UK and two in Finland. The research examines how community energy projects develop in ‘niches'. Research findings highlight that motivations for projects include monetary savings, energy savings and climate change. Projects are developed by pre-existing community groups or groups that have come together to develop an energy project. Local embedding of community energy projects to each project's individual circumstances helps successful project delivery. Pre-existing skills and tacit knowledge such as the ability to seek information and fill in funding applications can aid success. Engagement with key stakeholders further shapes projects' aims and objectives. Community energy projects benefit from a clear leader who works with a supportive team. There is evidence of projects networking at the local and national level in the UK, while in Finland networking remains limited to the local area and projects often develop in isolation. Furthermore, there is a clear lack of active intermediary organisations in the Finnish context. Policy discourse at the government level can aid the attractiveness of community energy, while continued funding support encourages more people to get involved in projects in their local areas.
|
210 |
A Theory of Renewable Energy from Natural EvaporationCavusoglu, Ahmet-Hamdi January 2017 (has links)
About 50% of the solar energy absorbed at the Earth’s surface is used to drive evaporation, a powerful form of energy dissipation due to water’s large latent heat of vaporization. Evaporation powers the water cycle that affects global water resources and climate. Critically, the evaporation driven water cycle impacts various renewable energy resources, such as wind and hydropower. While recent advances in water responsive materials and devices demonstrate the possibility of converting energy from evaporation into work, we have little understanding to-date about the potential of directly harvesting energy from evaporation.
Here, we develop a theory of the energy available from natural evaporation to predict the potential of this ubiquitous resource. We use meteorological data from locations across the USA to estimate the power available from natural evaporation, its intermittency on varying timescales, and the changes in evaporation rates imposed by the energy conversion process. We find that harvesting energy from natural evaporation could provide power densities up to 10 W m-2 (triple that of present US wind power) along with evaporative losses reduced by 50%. When restricted to existing lakes and reservoirs larger than 0.1 km2 in the contiguous United States (excluding the Great Lakes), we estimate the total power available to be 325 GW. Strikingly, we also find that the large heat capacity of water bodies is sufficient to control power output by storing excess energy when demand is low.
Taken together, our results show how this energy resource could provide nearly continuous renewable energy at power densities comparable to current wind and solar technologies – while saving water by cutting evaporative losses. Consequently, this work provides added motivation for exploring materials and devices that harness energy from evaporation.
|
Page generated in 0.0482 seconds