A chalcogenide glass (arsenic-trisulfide, As2S3) optical waveguide is vertically integrated onto titanium-diffused lithium-niobate (Ti:LiNbO3) waveguides to add optical feedback paths and to create more compact optical circuits. Lithium-niobate waveguides are commonly used as building blocks for phase and amplitude modulators in high speed fiber communication networks due to its high electrooptic coefficient and low mode coupling loss to single-mode optical fibers. Although it can easily be modulated using an RF signal to create optical modulators, it lacks the intrinsic trait to create optical feedback loops due to its low core-to-cladding index contrast. Ring resonators are main building blocks of many chip-scale optical filters that require these feedback loops and are already demonstrated with other material systems. We have, for the first time, incorporated As2S3 as a guiding material on Ti:LiNbO3 and fabricated s-bends and ring resonators. We have examined As2S3-on-Ti:LiNbO3 waveguides at simulation, microfabrication, and optical characterization levels.

This paper is going to emphasize on the air squeeze film damping effect on micro-mechanical resonant beam in MEMS. In general, the low energy density of electrode force will cause high-voltage power supply to drive the electro- micro resonators; reducing the distance between the electrode and resonant beam can be the most efficient way to solve this problem. But bringing different exciting frequency of system and environmental pressure to the air squeeze film effect might cause it changes form similarly to the damping qualities, and this will also change the dynamic characteristics of micro resonator. The dynamic model for double clamped micro-mechanical resonant beam is proposed by using Lagrange¡¦s equation in this study. The corresponding eigenvalue problems of resonant beam are formulated and solved by employing the hypothetical mode method. Under the presumption of viscous damping model, we may obtain a damping factor which includes the parameters of size, temperature and air pressure when energy transfer model is employed to simulate the squeeze film damping effect of two immediate objects. Eventually, the damping ratio and the dynamic characteristics of resonant microbeam are derived by means of exploring the frequency response function of system. Besides, the frequency change of micro-mechanical resonant beam due to an axial force is also considered in the thesis.

Thesis (Ph.D.)--City University of Hong Kong, 2009. / "Submitted to the Department of Electronic Engineering in partial fulfillment of the requirements for the degree of Doctor of Philosophy." Includes bibliographical references (leaves 141-158)

Eddy current sensing has been successfully used in various applications from testing heat exchange tubes for nuclear power plants to assessing dielectric thickness on printed circuit boards. However, in civil infrastructures cosmetic or cementitious surface material often keeps the probe or reader coil from accessing conductive medium inside the structure, resulting in reduced coupling as the distance increases between the DUT (device under test) and probe. Thus, the direct application of existing eddy current sensing technique is not very useful to detect flaws in civil infrastructures. To address this weak coupling problem, a simple scheme is proposed in which a resonant passive repeater tag is placed between the reader coil and the conducting test target. The feasibility of detecting defects like cracks or fractures in conductive medium using a passive resonant tag and measuring the impedance as a method of interrogation is shown. The electromagnetic waves are transmitted into and detected from a resonant tag and the conductive medium underneath the tag without direct physical contact using a reader coil above the resonant repeater tag. Experimental data taken from simple setups to demonstrate the advantage of the proposed scheme are presented. In addition, the theoretical background, such as the self and mutual inductance, and image theory, are discussed extensively. It is also shown that the theories can be applicable to build the equivalent circuit with the proper calibration process. The analyses have been carried out to characterize the responses resulting from the various experiments. Furthermore, new measurands, the effective normalized inductance and resistance, were devised and employed to reanalyze the same experimental data. An effort to construct equivalent circuit model of the system has been made to correctly predict the response without the actual experiment. To improve the process of building the equivalent circuit, the total 4 types of tags and 6 types of DUT are built and tested. The analysis is also given for the constructed equivalent circuit model.

This thesis presents the results of the experimental studies on two kindof Superconducting circuits: one-dimensional Josephson junction chains andsuperconducting coplanar waveguide (CPW) resonators. One-dimensionalJosephson junction chains are constructed by connecting many Superconducting quantum interference devices (SQUIDs) in series. We have studied DC transport properties of the SQUID chains and model their nonlineardynamics with Thermally Activated Phase-Slips (TAPS). Experimental andsimulated results showed qualitative agreement revealing the existence of auniform phase-slipping and phase-sticking process which results in a voltage-independent current on the dissipative branch of the current-voltage char-acteristics (IVC). By modulating the effective Josephson coupling energy ofthe SQUIDs (EJ ) with an external magnetic field, we found that the ratio EJ /EC is a decisive factor in determining the qualitative shape of theIVC. A quantum phase transition between incoherent Quantum Phase Slip, QPS (supercurrent branch with a finite slope) to coherent QPS (IVC withwell-developed Coulomb blockade) via an intermediate state (supercurrentbranch with a remnant of Coulomb blockade) is observed as the EJ /EC ratio is tuned. This transition from incoherent QPS to the intermediate-statehappens around R0 ∼ RQ (RQ = h/4e^2 = 6.45kΩ). We also fabricated structured chains where a SQUID at the middle of the chain (central SQUID) has different junction size and loop area compared to other SQUIDs in the chain. Results showed that with these structured chains it is possible to localize andtune the amplitude of both TAPS and QPS at the central SQUID. The second part of the thesis describes the fabrication process and themeasurement results of superconducting CPW resonators. Resonators withdifferent design parameters were fabricated and measured. The transmissionspectra showed quality factors up to, Q ∼ 5 × 10^5 . We have observed bendingof the resonance curves to the lower frequencies due to existence of a nonlinear kinetic inductance. The origin of the nonlinear kinetic inductance isthe nonlinear relation between supercurrent density, Js, and superfluid veloc-ity, vs , of the charge carriers on the center line of the resonators. A simplemodel based on the Ginzburg-Landau theory is used in order to explain ob-served nonlinear kinetic inductance and estimates using this model showedgood agreement with the experimental results. / <p>QC 20131030</p> / SCOPE

No description available.

No description available.

This thesis presents a full-vectorial mode matching method for whispering gallery microcavity analysis. With this technique, optical properties such as resonance wavelength, quality factor and electromagnetic field distribution of an arbitrarily shaped microcavity can be computed with high accuracy. To illustrate this, a mode matching analysis that involves a single propagating whispering gallery mode is performed on a microtoroid in the presence of individual nonplasmonic nanoparticle on its surface. This method is also extended to the analysis of cavity adsorbed by a plasmonic nanoparticle at a wavelength close to plasmon resonance where the resulting field distortion invalidates other approaches. The simulation demonstrates high efficiency and is in close agreement with experimental measurements reported in previous work. Furthermore, we extend our mode matching analysis to the case where multiple whispering gallery modes are involved in the course of light propagation. The new formalism is performed on a cavity-waveguide coupling system to investigate the light delivery from a tapered optical waveguide to a microcavity at high precision. A novel hybrid integration scheme to implement an ultra-high quality factor microcavity on a silicon-on-insulator platform is proposed based on the related modelling results. / Graduate / 0752 / 0544 / duxuanmax@gmail.com

Integrated ring resonators have attracted a considerable interest in optical communications because of their small size and wide range of applicability. Here we consider several aspects of these devices, beginning with a tunable hybrid ring resonators consisting of a silicon over insulator (SOI) ring covered with a polymer layer in a variable electric field. Varying the field changes the polymer refractive index and consequently the resonance condition of the cavity. This device offers a large degree of optical confinement together with a high modulation speed. Subsequently, we design and present fabrication results for a Wavelength Division Multiplexing (WDM) multiplexer/demultiplexer formed from a series of ring resonators with two channels separated by 50 GHz each that is predicted to exhibit a free spectral range (FSR) of 100 GHz , signal dispersion less than 30 ps/nm and a signal cross-talk less than -23 dB. Finally, we analyze the application of the coupled ring waveguide circuit to rotation sensors based on the Sagnac phase shift. Here, however our analysis indicates that a single ring, of the same area exhibits a higher degree of sensitivity to rotational motion than a multiple ring circuit.

Thesis (M.Phil.)--Hong Kong University of Science and Technology, 2008. / Includes bibliographical references (leaves 94-101). Also available in electronic version.