<p>Aquaplaning accidents are relatively rare, but could have fatal effects. The task of this master’s thesis is to use data from the Laser Road Surface Tester to detect road sections with risk of aquaplaning. </p><p>A three-dimensional model based on data from road surface measurements is created using MATLAB (version 6.1). From this general geometrical model of the road, a pond model is produced from which the theoretical risk ponds are detected. A risk pond indication table is fur-ther created. </p><p>The pond model seems to work well assuming that the data from the road model is correct. Determining limits for depth and length of risk ponds can be made directly by the user. MATLAB code is reasonably easy to understand and this leaves great opportunities for changing different parameters in a simple way. </p><p>Supplementary research is needed to further improve the risk pond detection model. Collecting data at smaller intervals and with more measurement points would be desirable for achieving better correlation with reality. In a future perspective, it would be wise to port the code to another programming language and this could make the computations faster.</p>

Aquaplaning accidents are relatively rare, but could have fatal effects. The task of this master’s thesis is to use data from the Laser Road Surface Tester to detect road sections with risk of aquaplaning. A three-dimensional model based on data from road surface measurements is created using MATLAB (version 6.1). From this general geometrical model of the road, a pond model is produced from which the theoretical risk ponds are detected. A risk pond indication table is fur-ther created. The pond model seems to work well assuming that the data from the road model is correct. Determining limits for depth and length of risk ponds can be made directly by the user. MATLAB code is reasonably easy to understand and this leaves great opportunities for changing different parameters in a simple way. Supplementary research is needed to further improve the risk pond detection model. Collecting data at smaller intervals and with more measurement points would be desirable for achieving better correlation with reality. In a future perspective, it would be wise to port the code to another programming language and this could make the computations faster.

A smooth surface with good friction on the cycle path is not only important for the traffic safety of the cyclists but also for their comfort and level of service. Potholes, cracks, and bumps are frequent obstructions on the cycle paths. These are all maintenance-related deficiencies associated with the degradation of the structure. In general, the knowledge on degradation of roads is good, as there is a long tradition of investigation into the degradation factors. Cycle paths, even though constructed with similar materials and techniques as the roads, are however not designed in the same way as roads, mainly since they will not be subjected to the same traffic load. Thus, one purpose of this licentiate thesis is to identify degradation factors specific for cycle paths, through a state-of-the-art literature study. The literature review is complemented by two papers, where Paper A analyses the distress found on Swedish municipal cycle paths and Paper B evaluates a novel method for condition assessments on cycle paths related to cycling comfort—the Bicycle Measurement Trailer. The review and papers are meant to act as the basis for the general aim of the PhD-project, namely, to develop more knowledge on the degradation of cycle paths. This knowledge is needed to improve the structural design approaches and maintenance strategies for cycle paths and to give guidance for preventive measures to inhibit degradation. / En slät yta, med god friktion, på cykelbanan är inte bara viktig för cyklisternas trafiksäkerhet, utan för deras komfort och framkomlighet. Potthål, sprickor och ojämnheter är vanliga hinder på cykelvägarna. Dessa underhållsrelaterade brister är direkt kopplade till nedbrytningen av cykelvägarna. Generellt sett är kunskapen om nedbrytning av vägar god då det finns en lång tradition av forskning kring nedbrytningsprocesserna. Cykelvägar, även om de är byggda med liknande material och tekniker som vägarna, är dock inte dimensionerade på samma sätt som vägar då de inte utsätts för samma trafikbelastning. Ett syfte med denna licentiatuppsats är således att identifiera nedbrytningsfaktorer som är specifika för cykelvägar. En ”state-of-the-art” litteraturstudie kompletteras av två artiklar, där Paper A analyserar de skador som återfinns på svenska kommunala cykelvägar och Paper B utvärderar en ny metod, Cykelmätvagnen, för tillståndsbedömningar på cykelvägar, relaterat till cykelkomfort. Litteraturstudien och artiklarna är tänkta att ligga till grund för doktorandprojektets övergripande syfte, nämligen att utveckla mer kunskap om cykelvägars nedbrytning. Denna kunskap behövs för att förbättra de strukturella dimensioneringsprinciperna och underhållsstrategierna för cykelvägar och ge vägledning för förebyggande åtgärder som motverkar deras nedbrytning.