This Master´s thesis deals with the design of a robotic cell for manipulation operations. By two robots are performed manipulation operations with a product between turntable, station with a pulsed fiber laser, label printer with applicator and conveyor belt. Further, the thesis describes the selection process of each device of the robotic cell, the design of an end effector and a fixture. The robotic cell is designed in compliance with the safety standards. The aim of this thesis is to design the robotic cell, which meets the requirement for a given cycle time. The cycle time is determined using a simulation model of the robotic cell created in PLM software Siemens Process Simulate.

The main goal of this master’s thesis is to create a design of robotic cell for operating of blasting machine. Operation of blasting machine consists of robotic manipulation of aluminium castings from input container to the blasting machine conveyor. After blasting operation aluminium castings are manipulated by robot from conveyor to output container. The part of the master's thesis is proposal of several variants of solution of design of robotic cell. Afterwards the best option is selected. The thesis also deals with design and selection of functional components in robotic cell. Functional verification of robotic cell is made in software Tecnomatix Process Simulate. Technical-economics evaluation is also part of this master’s thesis.

Orientador: João Maurício Rosário / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica / Made available in DSpace on 2018-08-24T20:54:16Z (GMT). No. of bitstreams: 1 Quesada_RicardoCarvalho_M.pdf: 5882863 bytes, checksum: c81566e2d212d4e33713e3b68eca499e (MD5) Previous issue date: 2014 / Resumo: A necessidade atual de procedimentos automatizados em ambientes industriais exige o desenvolvimento e utilização de métodos, ferramentas e dispositivos com o objetivo de prototipagem rápida para a concepção, especificação e validação desses ambientes industriais, justificando ainda que a subutilização de dispositivos, que nesta área pode apresentar um custo elevado e se for demorado, à obsolescência dos equipamentos utilizados, fazendo com que a empresa não tenha gastos desnecessários e possa otimizar seu funcionamento. Este trabalho tem como objetivo, desenvolver metodologias, a partir da utilização de ferramentas disponíveis no mercado para a concepção de células automatizadas em ambientes industriais com integração de dispositivos robóticos. Para o desenvolvimento e validação dos conceitos e ferramentas apresentados nesse trabalho será realizado um estudo de caso, com a modelagem de dispositivos industriais utilizando o software de programação off-line de robôs RobotStudioTM, o formalismo GRAFCET como ferramenta de modelagem e integração de Sistemas Automatizados, e o ambiente LabviewTM para supervisão e controle, de modo a permitir a completa automação desse estudo de caso, e ainda a possibilidade de estabelecer que o sistema seja controlado remotamente através de comunicação via WEB / Abstract: The current need for automated procedures in industrial environments requires the development and use of methods, tools and devices for the purpose of rapid prototyping for the design, specification and validation of these industrial environments, yet justifying the underuse of devices that this area may have a high cost and if delayed, the obsolescence of the equipment used, making the company has not unnecessary expenses and can optimize its operation. This paper aims to develop methodologies, from the use of commercially available tools for designing cells in industrial environments with automated integration of robotic devices. For the development and validation of the concepts and tools presented in this work will be a case study with industrial devices using modeling software off-line programming of robots RobotStudio¿, GRAFCET formalism as a modeling tool and integration of Automated Systems, and environment LabVIEW¿ supervision and control, to allow complete automation of this case study, and the possibility of establishing the system to be controlled remotely through WEB communication / Mestrado / Mecanica dos Sólidos e Projeto Mecanico / Mestre em Engenharia Mecânica

The main task of this master thesis is design of robotic deburring workcell. The thesis informs about basic requests of object deburring using industrial robots. From layout variants, the one most suitable is picked. Chosen variant contains proper clamping solution as well as deburring tool and safety requirements. The concept design of robotic deburring cell in 3D visualization is the result of this diploma thesis.

This diploma thesis deals with design of a robotized workplace for welding truss structures. First, the target construction that the work focuses on is shown. Then the functions of the entire workplace are designed, including the procedures for activities and the gross displacement of the used components and their layout. The next chapter itemize specific robots and components. This, along with the solution of safety and ergonomics, makes the layout of the entire workplace more precise. Everything is completed by creating a simulation model in Siemens Tecnomatix Process Simulate, where all the welding operations are simulated.

Master's thesis is focused on design of robotized workplace for assembly of drill chucks. In the first part the fundamental issue is described. The next part contains an analysis of selected chuck, which continues with design of robotized workplace including components. The thesis is also focused on a work cycle design, risk analysis and economic evaluation. Drawing documentation, 3D workplace model and work cycle simulation video is attached.

This diploma thesis was written within Czech-German study programme Production systems (VUT v Brně & TU Chemnitz). This thesis is divided into four main parts. In the first part is brought out the introduction to design of robotic cells. Following part is concentrated on analysis of present state in area of machines with parallel kinematics. The penultimate part, on which is focused the main attention, is dedicated to kinematic analysis of delta-robot. Closing part of this Thesis presents the study of experimental robotized workplace with integrated delta-robot.

The purpose of this master’s thesis is a design of the robotic cell for spot welding followed by manipulation with parts assigned for automotive industry. The cell should consist of a rotary table operated by a process operator and set of six-axis robots for spot welding and manipulation with parts. The thesis also describes the design of the end effectors of all robots, the design of rotary table with regard to welding technology and configuration of the cell to obtain maximal efficiency. The output of the thesis is 3D model, workflow simulation, evaluation of the production times and operator work conditions.

This Master`s thesis deals automation of the workplace for manipulation operations. Robot’s role is take cooler from case, insert them into the dimensional and tightness device and then robot must place cooler on the output conveyor in robotic cell. The thesis describe deployment working cell, the selection and design process of each device and the robotic cell is designed with the safety standards. On the end in this thesis is a technical-economics evaluation. The simulation model in Process Simulate is a aim of this thesis, because we know working cycle time from this model.

This thesis deals with a robotic workstation for the specific application which is lubrication of components. There is designed a complete robotic cell including input and output devices. Its particular features are described. The task is based on the industry requirements and the projected workplace is replaced by manual labor. The original technology is replaced by an automatic solution. The whole workstation is designed with security in mind. They are used mechanical and electronic security features. The thesis contains economic evaluation of the workplace, including estimated payback period.