Spelling suggestions: "subject:"dock physics model"" "subject:"rock physics model""
1 |
Rock Physics-Based Carbonate Reservoir Pore Type Evaluation by Combining Geological, Petrophysical and Seismic DataDou, Qifeng 2011 May 1900 (has links)
Pore type variations account for complex velocity-porosity relationship and intensive permeability heterogeneity and consequently low oil and gas recovery in carbonate reservoir. However, it is a challenge for geologist and geophysicist to quantitatively estimate the influences of pore type complexity on velocity variation at a given porosity and porosity-permeability relationship. A new rock physics-based integrated approach in this study was proposed to quantitatively characterize the diversity of pore types and its influences on wave propagation in carbonate reservoir. Based on above knowledge, permeability prediction accuracy from petrophysical data can be improved compared to conventional approach. Two carbonate reservoirs with different reservoir features, one is a shallow carbonate reservoir with average high porosity (>10%) and another one is a supper-deep carbonate reservoir with average low porosity (<5%), are used to test the proposed approach.
Paleokarst is a major event to complicate carbonate reservoir pore structure. Because of limited data and lack of appropriate study methods, it is a difficulty to characterize subsurface paleokarst 3D distribution and estimate its influences on reservoir heterogeneity. A method by integrated seismic characterization is applied to delineate a complex subsurface paleokarst system in the Upper San Andres Formation, Permian basin, West Texas. Meanwhile, the complex paleokarst system is explained by using a carbonate platform hydrological model, similar to modern marine hydrological environments within carbonate islands.
How to evaluate carbonate reservoir permeability heterogeneity from 3D seismic data has been a dream for reservoir geoscientists, which is a key factor to optimize reservoir development strategy and enhance reservoir recovery. A two-step seismic inversions approach by integrating angle-stack seismic data and rock physics model is proposed to characterize pore-types complexity and further to identify the relative high permeability gas-bearing zones in low porosity reservoir (< 5%) using ChangXing super-deep carbonate reservoir as an example. Compared to the conventional permeability calculation method by best-fit function between porosity and permeability, the results in this study demonstrate that gas zones and non-gas zones in low porosity reservoir can be differentiated by using above integrated permeability characterization method.
|
2 |
Microscopic and Macroscopic Characterization on Mechanical Properties of Gas Hydrate / ガスハイドレートの力学特性に関する微視的及び巨視的評価Jihui, Jia 23 March 2016 (has links)
京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第19695号 / 工博第4150号 / 新制||工||1640(附属図書館) / 32731 / 京都大学大学院工学研究科都市社会工学専攻 / (主査)教授 小池 克明, 教授 高岡 昌輝, 准教授 村田 澄彦 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM
|
3 |
Influence of Rock Types on Seismic Monitoring of CO2 Sequestration in Carbonate ReservoirsMammadova, Elnara 2011 August 1900 (has links)
Although carbonates hold more than 60 percent of the world's oil reserves, they, nevertheless, exhibit much lower average recovery factor values than terrigenous
sandstone reservoirs. Thus, utilization of advanced enhanced oil recovery (EOR) techniques such as high pressure CO2 injection may normally be required to recover oil in place in carbonate reservoirs. This study addresses how different rock types can influence the seismic monitoring of CO2 sequestration in carbonates.
This research utilizes an elastic parameter, defined in a rock physics model of poroelasticity and so-called as the frame flexibility factor, to successfully quantify the carbonate pore types in core samples available from the Great Bahama Bank (GBB). This study shows that for carbonate samples of a given porosity the lower the frame flexibility factors the higher is the sonic wave velocity. Generally, samples with frame flexibility values of <4 are either rocks with visible moldic pores or intraframe porosity; whereas, samples with frame flexibility values of >4 are rocks with intercrystalline and microporosity. Hence, different carbonate pore geometries can be quantitatively predicted using the elastic parameters capable of characterizing the porous media with a representation of their internal structure on the basis of the flexibility of the frame and pore connectivity.
In this research, different fluid substitution scenarios of liquid and gaseous CO2 saturations are demonstrated to characterize the variations in velocity for carbonate-specific pore types. The results suggest that the elastic response of CO2 flooded rocks is mostly governed by pore pressure conditions and carbonate rock types. Ultrasonic P-wave velocities in the liquid-phase CO2 flooded samples show a marked decrease in the order of 0.6 to 16 percent. On the contrary, samples flooded with gaseous-phase CO2 constitute an increase in P-wave velocities for moldic and intraframe porosities, while establishing a significant decrease for samples with intercrystalline and micro-porosities. Such velocity variations are explained by the stronger effect of density versus
compressibility, accounting for the profound effect of pore geometries on the acoustic properties in carbonates.
The theoretical results from this research could be a useful guide for interpreting the response of time-lapse seismic monitoring of carbonate formations following CO2
injection at depth. In particular, an effective rock-physics model can aid in better discrimination of the profound effects of different pore geometries on seismic monitoring of CO2 sequestration in carbonates.
|
Page generated in 0.4331 seconds