The United States Navy incorporates many different occupations to ensure it achieves its overall mission. These occupations are extremely diversified and present a wide spectrum of occupational exposures. Many of these exposures have been well studied and documented. However, shipboard pneumatic tool hand-arm vibration, (HAV) and how it relates to different body postures is an area of occupational exposure that has received little attention. The chief objective of this study was to assess whether there is a difference in hand-arm vibration levels, while working on one of two surface orientations (e.g., horizontal and vertical) among distinctly different pneumatic tools while cleaning or not cleaning. The design of the study evaluated three pneumatic tools cleaning both horizontal and vertical surfaces and the fourth tool only cleaning a horizontal surface. HAV levels were measured to identify the effect horizontal and vertical surface orientations had on the tool. Five subjects were used in the evaluation of the four tools by a random sequencing order. Each subject was required to hold the tool in an idle condition, an activated without cleaning condition, and an activated cleaning condition, (surface contact) for 20 seconds each. These conditions were evaluated in two different surface orientations; horizontal and vertical (except for the 4th tool). Each subject repeated each of the cleaning/not cleaning conditions three times for a total of 7 measurements per surface. The idle condition was only conducted one time for each tool and surface. The measurements were collected from a Quest, HAVPro instrument using an accelerometer on the pneumatic tool following ISO 5349-1:2001 and ISO 5349-2:2001 methods.A three-way ANOVA (subjects by tool, by condition, (cleaning vs. not cleaning) and tool vs. condition) with replicates (not including idle conditions) was conducted on the data. The analysis included the main effects and the interaction of tool and surface orientation. The subjects were treated as a blocking variable. All the main effects and the interaction were significant at p<0.0001, except for surface, p<0.6396. Surface orientation does not affect HAV levels in pneumatic tools.

近年，IoTに基づく「つながる工場」に関する技術開発が着目され，日本の次世代の製造業を支えるために，新しい研究開発が求められている．特に機械加工の現場では，異常検知や適応制御のために加工現象を精確かつリアルタイムにモニタできる技術が必要とされている．そこで，マシニングセンタなどの工作機械において，回転工具の加工中に多チャンネルで各種の物理量を切削点近傍にてモニタ可能な無線多機能ホルダを開発し，様々な工具，加工方法を対象にその有効性を示した． / Currently, a smart monitoring technology has been attracting particular attention in the factory automation fields regarding the Internet of things (IoT). Particularly in the machining site, the technology of monitoring the processing phenomenon in precision and real-time is required for abnormality detection or adaptive control. Then, we developed a novel tool holder equipped with a wireless communication function to monitor the tool temperature and vibrating accelerations near the cutting point during a tool rotating operation, and we showed effectiveness for various tools and processing method. / 博士(工学) / Doctor of Philosophy in Engineering / 同志社大学 / Doshisha University