Rubisco activase operates as the chaperone responsible for maintaining the catalytic competency of Ribulose 1,5-bisphophate carboxylase oxygenase (Rubisco) in plants. Rubisco is notoriously inefficient, rapidly self-inactivating under physiological conditions. Rubisco activase uses the power released from the hydrolysis of ATP to power a conformational change in Rubisco, reactivating it. Rubisco activase has been previously shown to form a large range of species in solution; however, little has been done to relate the size of oligomeric species and physiological activity. In this thesis data is presented from a range of biophysical techniques including analytical ultracentrifugation, static light scattering, and small angle X-ray scattering combined with activity assays to show a strong relationship between oligomeric state and activity. The results suggest that small oligomers comprising 2-4 subunits are sufficient to attain full specific activity, a highly unusual property for enzymes from the AAA+ family. Studies utilising a number of Rubisco activase variants enabled the determination of how Rubisco and Rubisco activase may interact within a plant cell. A detailed characterisation of the α-, β-, and a mixture of isoforms further broadened our knowledge on the oligomerisation of Rubisco activase. Of particular importance was the discovery of a thermally stable hexameric Rubisco activase variant. It is hoped that these findings may contribute to development of more heat tolerant Rubisco activase and lead research into more drought resilient crop plants.

abstract: The primary carbon fixing enzyme Rubisco maintains its activity through release of trapped inhibitors by Rubisco activase (Rca). Very little is known about the interaction, but binding has been proposed to be weak and transient. Extensive effort was made to develop Förster resonance energy transfer (FRET) based assays to understand the physical interaction between Rubisco and Rca, as well as understand subunit exchange in Rca. Preparations of labeled Rubisco and Rca were utilized in a FRET-based binding assay. Although initial data looked promising, this approach was not fruitful, as no true FRET signal was observed. One possibility is that under the conditions tested, Rca is not able to undergo the structural reorganizations necessary to achieve binding-competent conformations. Rca may also be asymmetric, leading to less stable binding of an already weak interaction. To better understand the structural adjustments of Rca, subunit exchange between different oligomeric species was examined. It was discovered that subunit exchange is nucleotide dependent, with ADP giving the fastest exchange, ATP giving slower exchange and ATPS inhibiting exchange. Manganese, like ADP, destabilizes subunit-subunit interactions for rapid and facile exchange between oligomers. Three different types of assemblies were deduced from the rates of subunit exchange: rigid types with extremely slow dissociation of individual protomers, tight assemblies with the physiological substrate ATP, and loose assemblies that provide fast exchange due to high ADP. Information gained about Rca subunit exchange can be used to reexamine the physical interaction between Rubisco and Rca using the FRET-binding assay. These binding assays will provide insight into Rca states able to interact with Rubisco, as well as define conditions to generate bound states for structural analysis. In combination with assembly assays, subunit exchange assays and reactivation studies will provide critical information about the structure/function relationship of Rca in the presence of different nucleotides. Together, these FRET-based assays will help to characterize the Rca regulation mechanism and provide valuable insight into the Rubisco reactivation mechanism. / Dissertation/Thesis / Doctoral Dissertation Biochemistry 2017

abstract: Proteins function as molecular machines which perform a diverse set of essential jobs. To use these proteins as tools and manipulate them with directed engineering, a deeper understanding of their function and regulation is needed. In the studies presented here, the chemical mechanism of a fluorescent protein and the assembly behavior of a chemo-mechanical protein were explored to better understand their operation. In the first study a photoconvertible fluorescent protein (pcFP) was examined which undergoes a photochemical transformation upon irradiation with blue light resulting in an emission wavelength change from green to red. Photo-transformable proteins have been used in high resolution, subcellular biological imaging techniques, and desires to engineer them have prompted investigations into the mechanism of catalysis in pcFPs. Here, a Kinetic Isotope Effect was measured to determine the rate-limiting step of green-to-red photoconversion in the reconstructed Least Evolved Ancestor (LEA) protein. The results provide insight on the process of photoconversion and evidence for the formation of a long-lived intermediate. The second study presented here focuses on the AAA+ protein Rubisco activase (Rca), which plays a critical role in the removal of inhibitors from the carbon-dioxide fixing enzyme Rubisco. Efforts to engineer Rubisco and Rca can be guided by a deeper understanding of their structure and interactions. The structure of higher plant Rca from spinach, and its interactions with its cognate Rubisco, were investigated through negative-stain electron microscopy (EM) and cryo-EM experiments. Multiple types of higher-order oligomers of plant Rca were imaged which have never been structurally characterized, and the AAA+ core of plant Rca was shown to bind Rubisco side-on, similar to bacterial Rca’s. Higher resolution structures of these aggregates and complexes are needed to make definitive observations on protein-protein interactions. However, the results presented here provide evidence for the formation of regulatory structures and an experimental foundation for future exploration of plant Rca through cryo-EM. / Dissertation/Thesis / Masters Thesis Biochemistry 2020

abstract: Ribulose-1, 5-bisphosphate carboxylase oxygenase, commonly known as RuBisCO, is an enzyme involved in carbon fixation in photosynthetic organisms. The enzyme is subject to a mechanism-based deactivation during its catalytic cycle. RuBisCO activase (Rca), an ancillary enzyme belonging to the AAA+ family of the ATP-ases, rescues RuBisCO by facilitating the removal of the tightly bound sugar phosphates from the active sites of RuBisCO. In this work, we investigated the ATP/ADP dependent oligomerization equilibrium of fluorescently tagged Rca for a wide range of concentrations using fluorescence correlation spectroscopy. Results show that in the presence of ADP-Mg2+, the oligomerization state of Rca gradually changes in steps of two subunits. The most probable association model supports the dissociation constants (K_d) of ∼4, 1, 1 μM for the monomer-dimer, dimer-tetramer, and tetramer-hexamer equlibria, respectively. Rca continues to assemble at higher concentrations which are indicative of the formation of aggregates. In the presence of ATP-Mg2+, a similar stepwise assembly is observed. However, at higher concentrations (30-75 µM), the average oligomeric size remains relatively unchanged around six subunits per oligomer. This is in sharp contrast with observations in ADP-Mg2+, where a marked decrease in the diffusion coefficient of Rca was observed, consistent with the formation of aggregates. The estimated K_d values obtained from the analysis of the FCS decays were similar for the first steps of the assembly process in both ADP-Mg2+ and ATP-Mg2+. However, the formation of the hexamer from the tetramer is much more favored in ATP-Mg2+, as evidenced from 20 fold lower K_d associated with this assembly step. This suggests that the formation of a hexameric ring in the presence of ATP-Mg2+. In addition to that, Rca aggregation is largely suppressed in the presence of ATP-Mg2+, as evidenced from the 1000 fold larger K_d value for the hexamer-24 mer association step. In essence, a fluorescence-based method was developed to monitor in vitro protein oligomerization and was successfully applied with Rca. The results provide a strong hint at the active oligomeric structure of Rca, and this information will hopefully help the ongoing research on the mechanistic enzymology of Rca. / Dissertation/Thesis / Ph.D. Chemistry 2014

京都大学 / 0048 / 新制・課程博士 / 博士(農学) / 甲第19781号 / 農博第2177号 / 新制||農||1041(附属図書館) / 学位論文||H28||N4997(農学部図書室) / 32817 / 京都大学大学院農学研究科農学専攻 / (主査)教授 白岩 立彦, 教授 奥本 裕, 教授 稲村 達也 / 学位規則第4条第1項該当 / Doctor of Agricultural Science / Kyoto University / DFAM

Doctor of Philosophy (PhD) / The Australian cotton industry has developed high yielding and high quality fibre production systems and attributes a significant contribution of this achievement to highly innovative breeding programs, specifically focused on the production of premium quality lint for the export market. Breeding programs have recently shifted attention to the development of new germplasm with superior stress tolerance to minimise yield losses attributed to adverse environmental conditions and inputs such as irrigation, fertilisers and pesticides. Various contributors to yield, such as physiology, biochemistry and gene expression have been implemented as screening tools for tolerance to high temperatures under growth cabinet and laboratory conditions but there has been little extension of these mechanisms to field based systems. This study evaluates tools for the identification of specific genotypic thermotolerance under field conditions using a multi-level ‘top down’ approach from crop to gene level. Field experiments were conducted in seasons 1 (2006) and 3 (2007) at Narrabri (Australia) and season 2 (2006) in Texas (The United States of America) and were supplemented by growth cabinet experiments to quantify cultivar differences in yield, physiology, biochemical function and gene expression under high temperatures. Whole plants were subjected to high temperatures in the field through the construction of Solarweave® tents and in the growth cabinet at a temperature of 42 oC. The effectiveness of these methods was then evaluated to establish a rapid and reliable screening tool for genotype specific thermotolerance that could potentially improve the efficiency of breeding programs and aid the development to high yielding cultivars for hot growing regions. Cotton cultivars Sicot 53 and Sicala 45 were evaluated for thermotolerance using crop level measurements (yield and fibre quality) and whole plant measurements (fruit retention) to determine the efficacy of these measurements as screening tools for thermotolerance under field conditions. Sicot 53 was selected as a relatively thermotolerant cultivar whereas Sicala 45 was selected as a cultivar with a lower relative thermotolerance and this assumption was made on the basis of yield in hot and cool environments under the CSIRO Australian cotton breeding program. Yield and fruit retention were lower under tents compared with ambient conditions in all 3 seasons. Yield and fruit retention were highly correlated in season 1 and were higher for Sicot 53 compared to Sicala 45 suggesting that fruit retention is a primary limitation to yield in a hot season. Thus yield and fruit retention are good indicators of thermotolerance in a hot season. Temperature treatment and cultivar differences were determined for fibre quality in seasons 1 and 3; however, quality exceeded the industry minimum thereby indicating that fibre quality is not a good determinant of thermotolerance. Physiological determinants of plant functionality such as photosynthesis, electron transport rate, stomatal conductance and transpiration rate were determined for cultivars Sicot 53 and Sicala 45 under the tents and an index of these parameters was also analysed to determine overall plant physiological capacity in the field. Physiological capacity was also determined under high temperatures in the growth cabinet using a light response curve at various levels of photosynthetically active radiation (PAR). Photosynthesis and electron transport rate decreased, whilst stomatal conductance and transpiration rate increased under the tents as well as under high temperatures in the growth cabinet. Photosynthesis and electron transport rate were higher for Sicot 53 but stomatal conductance and transpiration rate were higher for Sicala 45 under the tents. No cultivar differentiation was evident for plants grown under high temperatures in the growth cabinet. Temperature treatment and cultivar differences in physiological function were greater in a hot year (season 1), thereby indicating the importance of cultivar selection for thermotolerance in the presence of stress. Electron transport rate was correlated with yield in season 1, thus suggesting the suitability of this method for broad genotypic screening for thermotolerance under field conditions. Biochemical processes such as membrane integrity and enzyme viability were used to determine cultivar specific thermotolerance under high temperature stress in the laboratory, field and growth cabinet. Electrolyte leakage is an indicator of decreased membrane integrity and may be estimated by the relative electrical conductivity or relative cellular injury assays. The heat sensitivity of dehydrogenase activity, a proxy for cytochrome functionality and capacity for mitochondrial electron transport, may be quantified spectrophotometrically. Cellular membrane integrity and enzyme viability decreased sigmoidally with exposure to increasing temperatures in a water bath. Membrane integrity was higher for Sicot 53 compared with Sicala 45 under the tents and under high temperatures in the growth cabinet. No temperature treatment or cultivar differences were found for enzyme viability under the tents; however, enzyme viability for Sicala 45 was higher in the growth cabinet compared with Sicot 53. Relative electrical conductivity was strongly correlated with yield under ambient field conditions and under the tents, suggesting impairment of electron flow through photosynthetic and/or respiratory pathways, thus contributing to lower potential for ATP production and energy generation for yield contribution. Thus, the membrane integrity assay was considered to be a rapid and reliable tool for thermotolerance screening in cotton cultivars. Gene expression was examined for cultivars Sicot 53 and Sicala 45 grown under high (42 oC) temperatures in the growth cabinet. Rubisco activase expression was quantified using quantitative real-time polymerase chain reaction analysis and was decreased under high temperatures and was lower for Sicala 45 than Sicot 53. Maximum cultivar differentiation was found after 1.0 h exposure to high temperatures and hence, leaf tissue sampled from this time point was further analysed for global gene profiling using cDNA microarrays. Genes involved in metabolism, heat shock protein generation, electron flow and ATP generation were down-regulated under high temperatures in the growth cabinet and a greater number of genes were differentially expressed for Sicala 45, thereby indicating a higher level of heat stress and a greater requirement for mobilisation of protective and compensatory mechanisms compared with Sicot 53. Cultivar specific thermotolerance determination using gene profiling may be a useful tool for understanding the underlying basis of physiological and biochemical responses to high temperature stress in the growth cabinet. There is future opportunity for profiling genes associated with heat stress and heat tolerance for identification of key genes associated with superior cultivar performance under high temperature stress and characterisation of these genes under field conditions. This research has identified cultivar differences in yield under field conditions and has identified multiple physiological and biochemical pathways that may contribute to these differences. Future characterisation of genes associated with heat stress and heat tolerance under growth cabinet conditions may be extended to field conditions, thus providing the underlying basis of the response of cotton to high temperature stress. Electron transport rate and relative electrical conductivity were found to be rapid and reliable determinants of cultivar specific thermotolerance and hence may be extended to broad-spectrum screening of a range of cotton cultivars and species and under a range of abiotic stress. This will enable the identification of superior cotton cultivars for incorporation into local breeding programs for Australian and American cotton production systems.

Doctor of Philosophy (PhD) / The Australian cotton industry has developed high yielding and high quality fibre production systems and attributes a significant contribution of this achievement to highly innovative breeding programs, specifically focused on the production of premium quality lint for the export market. Breeding programs have recently shifted attention to the development of new germplasm with superior stress tolerance to minimise yield losses attributed to adverse environmental conditions and inputs such as irrigation, fertilisers and pesticides. Various contributors to yield, such as physiology, biochemistry and gene expression have been implemented as screening tools for tolerance to high temperatures under growth cabinet and laboratory conditions but there has been little extension of these mechanisms to field based systems. This study evaluates tools for the identification of specific genotypic thermotolerance under field conditions using a multi-level ‘top down’ approach from crop to gene level. Field experiments were conducted in seasons 1 (2006) and 3 (2007) at Narrabri (Australia) and season 2 (2006) in Texas (The United States of America) and were supplemented by growth cabinet experiments to quantify cultivar differences in yield, physiology, biochemical function and gene expression under high temperatures. Whole plants were subjected to high temperatures in the field through the construction of Solarweave® tents and in the growth cabinet at a temperature of 42 oC. The effectiveness of these methods was then evaluated to establish a rapid and reliable screening tool for genotype specific thermotolerance that could potentially improve the efficiency of breeding programs and aid the development to high yielding cultivars for hot growing regions. Cotton cultivars Sicot 53 and Sicala 45 were evaluated for thermotolerance using crop level measurements (yield and fibre quality) and whole plant measurements (fruit retention) to determine the efficacy of these measurements as screening tools for thermotolerance under field conditions. Sicot 53 was selected as a relatively thermotolerant cultivar whereas Sicala 45 was selected as a cultivar with a lower relative thermotolerance and this assumption was made on the basis of yield in hot and cool environments under the CSIRO Australian cotton breeding program. Yield and fruit retention were lower under tents compared with ambient conditions in all 3 seasons. Yield and fruit retention were highly correlated in season 1 and were higher for Sicot 53 compared to Sicala 45 suggesting that fruit retention is a primary limitation to yield in a hot season. Thus yield and fruit retention are good indicators of thermotolerance in a hot season. Temperature treatment and cultivar differences were determined for fibre quality in seasons 1 and 3; however, quality exceeded the industry minimum thereby indicating that fibre quality is not a good determinant of thermotolerance. Physiological determinants of plant functionality such as photosynthesis, electron transport rate, stomatal conductance and transpiration rate were determined for cultivars Sicot 53 and Sicala 45 under the tents and an index of these parameters was also analysed to determine overall plant physiological capacity in the field. Physiological capacity was also determined under high temperatures in the growth cabinet using a light response curve at various levels of photosynthetically active radiation (PAR). Photosynthesis and electron transport rate decreased, whilst stomatal conductance and transpiration rate increased under the tents as well as under high temperatures in the growth cabinet. Photosynthesis and electron transport rate were higher for Sicot 53 but stomatal conductance and transpiration rate were higher for Sicala 45 under the tents. No cultivar differentiation was evident for plants grown under high temperatures in the growth cabinet. Temperature treatment and cultivar differences in physiological function were greater in a hot year (season 1), thereby indicating the importance of cultivar selection for thermotolerance in the presence of stress. Electron transport rate was correlated with yield in season 1, thus suggesting the suitability of this method for broad genotypic screening for thermotolerance under field conditions. Biochemical processes such as membrane integrity and enzyme viability were used to determine cultivar specific thermotolerance under high temperature stress in the laboratory, field and growth cabinet. Electrolyte leakage is an indicator of decreased membrane integrity and may be estimated by the relative electrical conductivity or relative cellular injury assays. The heat sensitivity of dehydrogenase activity, a proxy for cytochrome functionality and capacity for mitochondrial electron transport, may be quantified spectrophotometrically. Cellular membrane integrity and enzyme viability decreased sigmoidally with exposure to increasing temperatures in a water bath. Membrane integrity was higher for Sicot 53 compared with Sicala 45 under the tents and under high temperatures in the growth cabinet. No temperature treatment or cultivar differences were found for enzyme viability under the tents; however, enzyme viability for Sicala 45 was higher in the growth cabinet compared with Sicot 53. Relative electrical conductivity was strongly correlated with yield under ambient field conditions and under the tents, suggesting impairment of electron flow through photosynthetic and/or respiratory pathways, thus contributing to lower potential for ATP production and energy generation for yield contribution. Thus, the membrane integrity assay was considered to be a rapid and reliable tool for thermotolerance screening in cotton cultivars. Gene expression was examined for cultivars Sicot 53 and Sicala 45 grown under high (42 oC) temperatures in the growth cabinet. Rubisco activase expression was quantified using quantitative real-time polymerase chain reaction analysis and was decreased under high temperatures and was lower for Sicala 45 than Sicot 53. Maximum cultivar differentiation was found after 1.0 h exposure to high temperatures and hence, leaf tissue sampled from this time point was further analysed for global gene profiling using cDNA microarrays. Genes involved in metabolism, heat shock protein generation, electron flow and ATP generation were down-regulated under high temperatures in the growth cabinet and a greater number of genes were differentially expressed for Sicala 45, thereby indicating a higher level of heat stress and a greater requirement for mobilisation of protective and compensatory mechanisms compared with Sicot 53. Cultivar specific thermotolerance determination using gene profiling may be a useful tool for understanding the underlying basis of physiological and biochemical responses to high temperature stress in the growth cabinet. There is future opportunity for profiling genes associated with heat stress and heat tolerance for identification of key genes associated with superior cultivar performance under high temperature stress and characterisation of these genes under field conditions. This research has identified cultivar differences in yield under field conditions and has identified multiple physiological and biochemical pathways that may contribute to these differences. Future characterisation of genes associated with heat stress and heat tolerance under growth cabinet conditions may be extended to field conditions, thus providing the underlying basis of the response of cotton to high temperature stress. Electron transport rate and relative electrical conductivity were found to be rapid and reliable determinants of cultivar specific thermotolerance and hence may be extended to broad-spectrum screening of a range of cotton cultivars and species and under a range of abiotic stress. This will enable the identification of superior cotton cultivars for incorporation into local breeding programs for Australian and American cotton production systems.