Thesis (MS)--Montana State University--Bozeman, 2010. / Typescript. Chairperson, Graduate Committee: Robert J. Marley. Includes bibliographical references (leaves 85-88).

No description available.

Within the last decade, centerline rumble strips have become increasingly prevalent as a safety countermeasure on undivided roadways throughout the United States. Within the state of Georgia, nearly 200 miles of centerline rumble strips have been installed in an effort to address the severity and frequency of crashes involving the centerline. With several thousands of miles of new installations throughout the nation in the last decade, much literature on this subject is still being amassed. This paper will compile and summarize existing literature in order to provide a thorough overview of the latest information from around the United States regarding the safety, usage, and impacts of centerline rumble strips. Furthermore, this paper seeks to comprehensively determine the safety impacts of centerline rumble strips on undivided, rural highway facilities in the state of Georgia. This portion of the study will prepare an updated inventory of centerline rumble strip installations in Georgia and perform a before-after study using three methods: a direct before-after analysis, a comparison before-after analysis, and a comparative analysis. These analyses will incorporate data from crash databases, police records, and traffic records to produce results unique to Georgia. Lastly, this paper will determine the current status of centerline rumble strips and the potential short- and long-term safety, physical, and unintended effects of centerline rumble strips both in the state of Georgia and throughout the United States through a survey sent to all fifty state transportation agencies. Through literature compilation, safety analyses, and findings on the effects of centerline rumble strips, this paper will aid in the future of centerline rumble strips within Georgia and the United States.

Master of Science / Department of Industrial & Manufacturing Systems Engineering / Malgorzata J. Rys / In this thesis, various safety aspects of center line rumble strips were evaluated. Based on the literature review center line rumble strips (CLRS) are considered to be effective safety countermeasure for reducing crossover accidents on two-lane, two-way roadways. CLRS are indentations milled into the center line of undivided two-lane, two-way roadways to warn driver of drifting into upcoming traffic. Researchers at Kansas State University (KSU) have conducted studies on CLRS and retroreflective pavement markings (RRPM) installed over them. Based on the literature review and the survey conducted on motorcycle riders it can be concluded that majority of riders believe in the effectiveness of CLRS and they recommend the KDOT to implement CLRS in more locations. From the survey conducted on residents of US 40 it can be concluded that RRPM help them in providing visual guidance. They also noticed that there is considerable deterioration of RRPM over CLRS on US 40. From the studies conducted on US 24, US 50 and US 40 it can be concluded that wet retroreflectivity of pavement markings installed over CLRS is considerably lower than dry retroreflectivity. In locations without CLRS wet retroreflectivity of RRPM is higher than dry retroreflectivity. Also, the analysis performed on retroreflectivity measurements from US 24, US 50 and US 40 show that retroreflectivity follows a linear reduction in performance over time. In addition, a new methodology was developed for evaluating RRPM over CLRS. Various tests and analysis were performed and the new method seems effective.

Master of Science / Department of Industrial & Manufacturing Systems Engineering / Malgorzata J. Rys / Centerline rumble strips (CLRS) are raised or indented patterns installed in the center of undivided rural two-lane highways. Their main function is to alert drivers who are encroaching or leaving the intended travel lane, by producing vibration and noise when crossed by vehicles’ tires. CLRS have been demonstrated to be an effective way in reducing head on and opposite direction sideswipe on two-lane highways (cross-over accidents). However, there are some disadvantages in their utilization, such as the exterior noise created by the strips, which may disturb residents in the highway vicinity. The objective of this study was to verify if the amount of noise created by CLRS is enough to impact negatively on residences and businesses, and to discover if the mean level of noise created by CLRS is statistically different than the noise generated by vehicles driving over smooth pavement. Two types of vehicles were driven over two different patterns of milled-in CLRS (rectangular and football-shaped) and over smooth asphalt pavement, at two different speeds. Researchers collected the noise levels at three distances 50, 100, and 150 feet, measured orthogonally from the center line, in 8 different open space locations. Results indicate that vehicle type, vehicle speed, pavement type, location and distances affect the levels of noise. In addition, both football and rectangular CLRS produced significantly higher levels of noise as compared to the smooth asphalt pavement. A 15 passenger van produced higher levels of noise in comparison with a sedan. Moreover, lower the vehicle speed, noise levels were lower. At every 50 feet of distance, the noise levels dropped significantly. CLRS do increase levels of noise relative to smooth pavement at distances up to 150 feet.

This study evaluated the feasibility of adding rumble strips to the left side of rural freeways in New Brunswick. A review of 940 collisions that occurred on Route 2 and Route 95 was supplemented with an analysis of 547 incidents that occurred on the Brun-Way owned and operated sections of Route 2 and Route 95. The study revealed that despite significantly more traffic travelling in the right lane, a larger number of ROR crashes occurred to the left side. Four Crash Modification Factors (CMF’s) ranging from 0.87 to 0.96 were developed in order to estimate the potential benefit of left side rumble strip installation. A left side specific CMF of 0.95 was developed for all crashes and a CMF of 0.93 was developed for Fatal and Injury (FI) crashes. A benefit-cost analysis revealed that the B/C ratio of the installation of left side rumble strips ranged from 7.9 to 9.4.

Thesis(M.S.)--Auburn University, 2006. / Abstract. Includes bibliographic references (p.67).

"This project is my way of saying thanks. My intention is to recognize the people who were able to transmit the passion and love for the land of my grandparents Asturias, with its heritage, history and music. My architectural purpose is to strengthen the tradition and culture by recovering the past. It is in this way , we will be stronger in the present and inspire future generations" / Master of Architecture

Major safety concerns are present at rural high speed intersections. When long uninterrupted tangents are located near rural intersections, the drivers can become inattentive to upcoming decision points. Traffic control devices could aid in mitigating these occurrences by warning drivers of upcoming decision points. One such device is transverse rumble strips, which act to provide motorists with an audible and tactile warning that their vehicle is approaching a decision point of critical importance to safety. The objective of this research was to determine if the presence of transverse rumble strips were an effective warning device for drivers approaching rural stop-controlled intersections. To evaluate the effectiveness of transverse rumble strips, vehicle speeds were measured at three locations along the approach to an intersection both before and after the installation of rumble strips. Vehicle speeds were measured at nine rural stop-controlled intersection sites in Texas. Overall, the installation of rumble strips generally produced small, but statistically significant (p ? 0.05), reductions in traffic speeds. There were some negative driver behavioral impacts (i.e., speed increases) that occurred after the installation of rumble strips. There were a few instances where speed change reductions of greater than 1 mph occurred, however, the overall trend was that speed change reductions were equal to or less than 1 mph. Although the rumble strips did not produce meaningful reductions in traffic speeds, they should still be considered based upon previous accident reductions and minimal installation costs.

Major safety concerns are present at rural high speed intersections. When long uninterrupted tangents are located near rural intersections, the drivers can become inattentive to upcoming decision points. Traffic control devices could aid in mitigating these occurrences by warning drivers of upcoming decision points. One such device is transverse rumble strips, which act to provide motorists with an audible and tactile warning that their vehicle is approaching a decision point of critical importance to safety. The objective of this research was to determine if the presence of transverse rumble strips were an effective warning device for drivers approaching rural stop-controlled intersections. To evaluate the effectiveness of transverse rumble strips, vehicle speeds were measured at three locations along the approach to an intersection both before and after the installation of rumble strips. Vehicle speeds were measured at nine rural stop-controlled intersection sites in Texas. Overall, the installation of rumble strips generally produced small, but statistically significant (p ? 0.05), reductions in traffic speeds. There were some negative driver behavioral impacts (i.e., speed increases) that occurred after the installation of rumble strips. There were a few instances where speed change reductions of greater than 1 mph occurred, however, the overall trend was that speed change reductions were equal to or less than 1 mph. Although the rumble strips did not produce meaningful reductions in traffic speeds, they should still be considered based upon previous accident reductions and minimal installation costs.