This thesis is a research conducted to find out if the specific absorption rate (SAR), imposed on the human head from cellular phones, can be reduced without having an significant impact on the overall performance and reception of the phone. The SAR values are influenced by various different variables like, type and size of the antenna, position of the antenna relative to human head, radiated power from the antenna, distance and angle from human head and finally the material covering the phone. The methodologies that will be used are to investigate three different approaches to SAR reduction. First approach is to investigate if the size and type of the material shielding the human head have significant impact on the SAR radiation, second approach is to investigate if the angle of the phone in relation to human head have significant impact and as the third approach is to investigate if it is possible to change the composition of the material which would ultimately lead to SAR reduction. Electric properties of the material are described by two variables conductivity and permittivity, and in the third part of the thesis I will change these two variables and then investigate how the SAR values change. Result will be presented as a 3D graph and it will directly present how SAR values relate to the material used as a phone casing. The distance and antenna variations will not be investigated. The distance values will be fixed to 2.5 cm from the human head and the antenna length will be quarter of the 900 MHz wave length. The investigations will be performed in a simulation program called FEMLAB and the results will be showed in text and figures.

No description available.

No description available.

In this thesis, I compare the performance of three different autofocus techniques for Synthetic Aperture Radar (SAR). The focusing is done by estimating phase errors in SAR data. The first one, the Phase Gradient Autofocus, is the most popular in the industry, it has been around for more than 20 years and it relies on the redundancy of the phase error in the SAR images. The second one, the Entropy-based minimization, uses measurements of image sharpness to focus the images and it has been available for about 10 years. The last, the Phase-space method, uses the Wigner transform and the ambiguity function of the SAR data to estimate the phase perturbations and it was recently introduced. Additionally, I develop a criteria for filtering the data for the cases in which the Phase-space method does not capture the entirety of the error.

Las técnicas de Interferometría Diferencial se basan en la combinación de varias imágenes SAR con distinta separación temporal y permiten la recuperación de las componentes lineales y no-lineales del proceso de deformación ocurrida en el entorno de interés durante el entero periodo de observación. Condición imprescindible para una correcta estimación de los fenómenos geodéticos es la elevada estabilidad de la plataforma que embarca el sensor SAR. Por esta razón, a nivel operativo se utilizan datos SAR satelitales.El objetivo de la Polarimetría SAR es describir el entorno de interés analizando las propiedades de la señal que éste dispersa cuando se utilizan diferentes combinaciones de polarización de las antenas transmisora y receptora, definidas canales polarimétricos. La polarimetría interferométrica SAR junta la capacidad de la polarimetría de separar mecanismos de dispersión independientes con la sensibilidad de la Interferometría a la altura de los correspondientes centros de fase, y permite describir la distribución volumétrica de los dispersores dentro de la escena observada. Debido a la falta de conjuntos de datos polarimétricos SAR satelitales que cubran tramos temporales suficientemente largos, hay aún un gran interés en las mejoras que la polarimetría podría aportar a técnicas ya consolidadas como las de Interferometría Diferencial.La actividad de investigación que se presentará en esta tesis doctoral abarca, por primera vez conjuntamente, las dos áreas de la Polarimetría SAR y de la Interferometría Diferencial utilizando el sensor radar terrestre de corto alcance (gbSAR) desarrollado por la Universitat Politècnica de Catalunyua (UPC). El trabajo constará de dos bloques principales.El primer bloque describirá las técnicas que se han desarrollado para convertir el sistema UPC gbSAR en un instrumento operativo y simplificar la utilización de sus adquisiciones, incluyendo la formulación matemática de los principios de funcionamiento del sistema, la cadena de procesado de los raw data y su calibración polarimétrica, los procedimientos de georeferenciación, y las técnicas de compensación de los artefactos atmosféricos presentes en sus medidas diferenciales.La segunda parte se ocupará de demostrar los beneficios que los datos SAR polarimétricos ofrecen respecto a la medición de un único canal polarimétrico para aplicaciones diferenciales. A fin de llevar a cabo esta tarea, se analizarán los datos gbSAR adquiridos durante una campaña de medidas de un año realizada en el pueblo de Sallent, en Cataluña, afectado por un fenómeno de subsidencia. En esta parte se analizarán tres temas principales. El primero es el comportamiento no estacionario en tiempo del entorno urbano bajo la geometría de observación del sensor terrestre. Se estudiarán en detalle los efectos de su inestabilidad y se propondrá una técnica de filtrado novedosa entallada a las propiedades de los blancos deterministas con el fin de preservar la información de la fase diferencial. El segundo tema abarca el problema de los efectos de troposfera en datos diferenciales con separación temporal superior al mes y de su separación de las variaciones de fase inducidas por el proceso de deformación. El tercer tema es la utilización de toda la información polarimétrica diferencial. Con fin de superar las limitaciones propias de las técnicas DInSAR clásicas, se propondrá un nuevo modelo polarimétrico de dispersión y se demostrarán las ventajas de la nueva formulación enseñando la mejor estimación del proceso de subsidencia en Sallent. En la parte final de este apartado se explorará también el potencial de las técnicas polarimétricas de optimización de la coherencia para aplicaciones diferenciales. / Differential SAR interferometry (DInSAR) deals with the combination of multi-temporal SAR images for the estimation of the linear and non-linear components of the deformation process within an area of interest during the whole observation period. A high stability of the platform is required for a reliable estimation of the geodetic phenomena. Accordingly, space-borne SAR images are operatively employed for DInSAR estimation, air-borne DInSAR still constituting a challenging research issue. SARPolarimetry aims at charactering the illuminated area through the analysis of its response under different combinations of transmitting and receiving antennas polarization, called polarimetric channels. The Polarimetric SAR Interferometry joins the capability of Polarimetry to separate independent scattering mechanisms and the sensitivity of Interferometry to the corresponding phase centers' elevation, making it possible to describe the volumetric distribution of the scatterers within the observed area. Owing to the lack of long-time collections of polarimetric space-borne SAR data, the studies carried out in this research field have been mainly based on air-borne acquisitions. Yet, there is a great expectation for the improvements that polarimetry may bring to assessed single-polarization techniques such as the DinSAR.The research described in this PhD dissertation fills for the first time the gap between SAR Polarimetry and SAR Differential Interferometry through the employment of an X-band ground-based SAR (gbSAR) sensor developed by the Remote Sensing Lab of the Universitat Politècnica de Catalunya (UPC).The work is divided into two main blocks. The first part deals with the algorithms that have been developed to make the UPC system operative and its acquisitions easy to use. Summarily, they include the mathematical formulation of the sensor's working principles, the raw data processing chain and the polarimetric calibration method, the geocoding procedures, and the techniques compensating for the atmospheric artefacts affecting gbSAR zero-baseline acquisitions.The second part is concerned with demonstrating the benefits that polarimetric SAR measurements provide with respect to single-polarization data for differential applications. In order to cope with this task, the data sets acquired during a one-year measurement campaign carried out in the village of Sallent, northeastern Spain, are analyzed. The experiment was focused on monitoring the subsidence phenomenon affecting a district of the village with the UPC gbSAR sensor. Three main issues are here argued. The first one is the time non-stationary behaviors characterizing the urban environment at X-band in the gbSAR observation geometry. Their effects are analyzed in detail and a novel non-stationary filtering technique tailored to deterministic scatterers' properties is introduced to preserve the differential phase information. The second one is the compensation of the troposphere changes in long-time span gbSAR differential interferograms. A new technique is worked out to effectively separate the differential phase variations due to the atmospheric artefacts from the deformation components. The third one is the use of the whole polarimetric differential information. A novel polarimetric differential scattering model is put forward to relax the constraints of an advanced DInSAR technique, the Coherent Pixel Technique, and to propose an innovative polarimetric approach. The advantages offered by Polarimetric DInSAR are demonstrated in terms of quality of the deformation-rate map describing the subsidence phenomenon in Sallent. In the end, the potentials of coherence-optimization techniques for the further improvement of the deformation process estimation are stressed.

SAR Wave INteraction for Natural Targets Over Land (SWINTOL) is a project funded by the European Space Agency. The study’s goal is to better understand the interaction of high frequency radar (> X-band) with vegetation and soils, in order to drive the development of a high-frequency electromagnetic model to simulate SAR imagery at high resolution (< 1 m). Existing models work well at C and X band frequencies, but do not work properly at higher frequencies. Cranfield University’s role in this project was to provide the field data necessary for model validation and development. Radar imagery was taken of a barley crop over an entire growing season. The portable outdoor GB-SAR system used the tomographic profiling (TP) technique to capture polarimetric imagery of the crop. TP is a scheme that provides detailed maps of the vertical backscatter pattern through a crop canopy, along a narrow transect directly beneath the radar platform. Fully-polarimetric imagery was obtained across overlapping 6.5 GHz bandwidths over the X- and Ku-band frequency range 8-20 GHz. This gave the opportunity to see the detailed scattering behaviour within the crop at the plant component level, from emergence of the crop through to harvesting. In combination with the imagery, full bio-geophysical characterisation of the crop and soil was made on each measurement date. Surface roughness characterisation of the soil was captured using a 3D optical stereoscopic system. This work details the measurements made, and provides a comparative assessment of the results in terms of understanding the backscatter in relation to biophysical and radar parameters.

Analog-to-digital converters (ADCs) are driven by rapid development of mobile communication systems to have higher speed, higher resolution and lower power consumption. Among multiple ADC architectures, successive approximation (SAR) ADCs attract great attention in mixed-signal design community recently. It is due to the fact that they do not contain amplification components and the digital logics are scaling friendly. Therefore, it is easier to design a SAR ADC with smaller component size in advanced technology than other ADC architectures, which decreases the power consumption and increases the speed of the circuit. However, capacitor mismatch limits the minimum size of unit capacitors which could be used for a SAR ADC with more than 10 bit resolution. Large capacitor both limits conversion speed and increases switching power. In this design project, a novel switching scheme and a novel calibration method are adopted to overcome the capacitor mismatch constraint. The switching scheme uses monotonic switching in a SAR ADC to gain one extra bit, and switches a dummy capacitor between the common mode voltage level (Vcm) and the ground (gnd) to obtain another extra bit. To keep the resolution constant, the capacitor number is reduced by two. The calibration method extracts missing code width to estimate the actual value of capacitors. The missing code extraction is accomplished by detecting metastable state of a comparator, forcing the current bit value and using less significant bits to measure the actual capacitor value. Dither method is adopted to improve calibration accuracy. Behavior model simulation is provided to verify the effectiveness of the calibration method. A circuit design of a 12 bit ADC and the simulation for schematic design is presented in this report. / text

Doctor of Philosophy (PhD) / The goal of this research was to test commercially viable alternative methods to fungicides for controlling storage diseases of melons that are safe for human health and the environment. Initially, experiments were conducted on melons to develop a protocol for optimum conditions of disease development during storage for different pathogens and for different stages of fruit maturity. For all pathogens tested, the study found that humidity greater than 90% and temperatures above 20° C support infection and rapid growth of disease. Differences in the rate of infection and extent of disease development after the inoculation of different storage pathogens was observed between rockmelon and honeydew melons, indicating differences in host pathogen interactions. Among the tested pathogens, Alternaria spp. was the least aggressive in infection and disease severity, growing considerably slower than Fusarium acuminatum which was moderately aggressive and Rhizopus spp. which was very aggressive, in comparison. Green half-slip melons showed greater resistance to pathogen attack than green full-slip fruit, while yellow full-slip melons were highly susceptible to pathogen attack. Therefore, the laboratory experiments for postharvest treatments of rockmelons were performed using green full-slip fruit challenged with F. acuminatum. Evaluation of physical and safe chemical methods of postharvest treatment to control postharvest diseases of melons showed that none of the treatments alone was as effective as the commercially available fungicide. Hot water solutions of safe compounds considerably increase their efficacy against postharvest rots, however, symptoms of phytotoxicity on the rind after dipping made their use unacceptable. Iodine was the only safe chemical tested which did not cause any phytotoxicity on melons. When combined with hot water, iodine showed the best control of storage rots and was as good as the fungicides carbendazim or guazatine. Hot water iodine dipping of fruit also delayed ripening and fruit were firmer during storage for a longer period of time. Systemic acquired resistance (SAR) was evaluated as a method of controlling powdery mildew in glasshouse grown rockmelon seedlings by treating with the activators 2,6-dichloroisonicotinic acid (INA) or benzothiadiazole (BTH) or water. Increased resistance due to application of INA or BTH, was observed by the reduction of powdery mildew on pre-inoculated detached leaves and also on intact leaves from natural infections. Heightened resistance due to spraying with elicitors of SAR, was further evident by the increased activities of the pathogenesis related proteins (PR proteins), peroxidase and accumulation of phenolics or antifungal compounds during and after challenge inoculation. Field grown rockmelons were treated with INA or BTH or BABA (β-aminobutyric acid) or water at various stages of plant growth and evaluated for increased resistance against pre and postharvest diseases. Both powdery mildew and downy mildew were significantly less on the SAR elicitor treated plants. Preharvest treatment with SAR elicitors also reduced storage diseases of the harvested rockmelon fruit. The reduction in postharvest disease was similar whether plants were treated once, three weeks before harvest, or given four sprays during the growing season beginning at anthesis. A further postharvest dip with 500 ppm of guazatine gave substantial reduction of storage rots of melons. Enhanced activities of chitinase and peroxidase, two major PR-proteins, compared to the control, indicated induction of defence had occurred in the foliage and fruit as a result of SAR. Over the course of four field and one glasshouse experiments slight phytotoxicity was observed in plants frequently sprayed with INA or BTH, but no phytotoxicity was seen after a single spray during the late stages of fruit development. The combination of SAR elicitor treatment and use of a safe postharvest dip provided substantial control of storage rots of rockmelons. The best treatment for control of storage rots involved application of BTH (50 ppm) two weeks before harvest, combined with a hot iodine dip (55° C) of fruit, achieving equivalent or better disease control than use of guazatine fungicide dip.

Parallel excitation is an emerging technique to improve or accelerate multi-dimensional spatially selective excitations in magnetic resonance imaging (MRI) using multi-channel transmit arrays. The technique has potential in many applications, such as accelerating imaging speed, mitigating field inhomogeneity in high-field MRI, and alleviating the susceptibility artifact in functional MRI (fMRI). In these applications, controlling radiofrequency (RF) power deposition (quantified by Specific Absorption Rate, or SAR) under safe limit is a critical issue, particularly in high-field MRI. This \dissertation will start with a review of multidimensional spatially selective excitation in MRI and current parallel excitation techniques. Then it will present two new RF pulse design methods to achieve reduced local/global SAR for parallel excitation while preserving the time duration and excitation pattern quality. Simulations incorporating human-model based tissue density and dielectric property were performed. Results have show that the proposed methods can achieve significant SAR reductions without enlonging the pulse duration at high-fields.

In this master’s thesis a model of a digitally compensated N-bit C-xC sar adc was developed.The architecture uses charge redistribution in a C-xC capacitor network to performthe conversion. Focus in the master’s thesis was set to understand how the charge is redistributedin the network during the conversion and calibration phase. Redundancy andparasitic capacitors is present in the system and rises the need for extra conversion steps aswell as a calibration algorithm. The calibration algorithm, Bit Weight Estimation, calculatesa weight corresponding to each bit which is used in the last conversion step to perform adigital weighting. The result of extensive calculations in different C-xC capacitor networkswas a model in Python of an N-bit C-xC sar adc. That model was used to create a model ofan eight-bit C-xC sar adc and finding suitable parameters for it through calculations andsimulations. The parameters giving the best inl was chosen. With the best parameters theC-xC sar adc static and dynamic performance was tested and showed an inl of less than1lsb, snr of 47:8 dB and enob of 7:6 bits.