With the evolution in the telecommunication generations, more and more research is going on in the field of wireless communications. The purpose of these researches has always been to provide good network coverage across the region with higher data rates, accuracy and better performance. Control on coverage and performance has always been in focus and is achieved using better and better antennas. Research has brought us with a sophisticated approach on the control of the properties of the antennas – introduction to Smart Antennas. Smart antennas can be used to support any radio based telecommunication system in any band, with the same level of performance. Several techniques are used to get good performance out of the antennas’ system. One impressive way is the usage of multiple antennas techniques. The approach is to transmit and receive 2 or more unique data on a single radio channel. To increase the diversity gain with the use of multiple input multiple output (MIMO), OFDM is a good technology used at the physical layer. It provides robustness to frequency selective fading, high spectral efficiency and low computational complexity. So MIMO-OFDM generates a good basis for 3GPP (3rd Generation Partnership Project) and 4G telecommunication technologies as well as other wireless communications systems. With MIMO-OFDM as basis, different standards like WiMAX (Wireless Interoperability for Microwave Access) and LTE (Long Term Evolution) have been implemented now. The use of OFDM has some limitations when it is considered for uplink like high peak to average power ratio (PAPR), for which a new technique of using Single Carrier is considered for uplink. Single Carrier FDMA has same advantages as of OFDM with low PAPR. In this thesis, we investigate the smart antennas with its application as LTE with the study of MIMO-OFDM and Single Carrier FDMA Systems. Performance of MIMO OFDM and SC-FDMA is evaluated by using simulations on MATLAB.

The ever-increasing demand for private and sensitive data transmission over wireless networks has made security a crucial concern in the current and future large-scale, dynamic, and heterogeneous wireless communication systems. To address this challenge, wireless researchers have tried hard to continuously analyze the jamming threats and come up with improved countermeausres. In this research, we have analyzed the jamming-vulnerabilities of the leading multi-carrier communication systems, Orthogonal Frequency Division Multiplexing (OFDM) and Single-Carrier Frequency Division Multiple Access (SC-FDMA). In order to lay the necessary theoretical groundwork, first we derived the analytical BER expressions for BPSK/QPSK and analytical upper and lower bounds for 16-QAM for OFDMA and SC-FDMA using Pilot Symbol Assisted Channel Estimation (PSACE) techniques in Rayleigh slow-fading channel that takes into account channel estimation error as well as pilot-jamming effect. From there we advanced to propose more novel attacks on the Cyclic Prefix (CP) of SC-FDMA. The associated countermeasures developed prove to be very effective to restore the system. We are first to consider the effect of frequency-selectivity and fading correlation of channel on the achievable rates of the legitimate system under pilot-spoofing attack. With respect to jamming mitigation techniques, our approaches are more focused on Anti-Jamming (AJ) techniques rather than Low Probability of Intercept (LPI) methods. The Channel State Information (CSI) of the two transceivers and the CSI between the jammer and the target play critical roles in ensuring the effectiveness of jamming and nulling attacks. Although current literature is rich with different channel estimation techniques between two legitimate transceivers, it does not have much to offer in the area of channel estimation from jammer's perspective. In this dissertation, we have proposed novel, computationally simple, deterministic, and optimal blind channel estimation techniques for PSK-OFDM as well as QAM-OFDM that estimate the jammer channel to the target precisely in high Signal-to-Noise (SNR) environment from a single OFDM symbol and thus perform well in mobile radio channel. We have also presented the feasibility analysis of estimating transceiver channel from jammer's perspective at the transmitter as well as receiver side of the underlying OFDM system. / Ph. D.

Machine-to-Machine (M2M) communications is an emerging communication paradigm that provides ubiquitous connectivity between devices along with an ability to communicate autonomously without human intervention. M2M communications acts as an enabling technology for the practical realization of Internet-of-Things (IoT). However, M2M communications differs from conventional Human-to-Human (H2H) communications due to its unique features such as massive number of connected devices, small data transmissions, little or no mobility, requirements of high energy efficiency and reliability, etc. These features create various challenges for existing communication networks which are primarily optimized for H2H communications. Therefore, novel solutions are required to meet the key requirements of M2M communications. In addition, enhancements are required at different layers of the protocol stack to support co-existence of M2M devices and H2H users. The main objective of this research is to investigate the challenges of M2M communications in two broad types of M2M networks; capillary M2M and cellular M2M networks. The primary focus is on developing novel solutions, algorithms, and protocol enhancements for successfully enabling M2M communications. Since cognitive radio technology is very promising for M2M communications, special emphasis is on capillary M2M networks with cognitive radio based Physical layer. Besides, the focus is also on exploring new frontiers in M2M communications. This thesis covers different aspects of M2M communications. Considering the motivation for cognitive M2M and service requirements of M2M devices, two cognitive MAC protocols have been proposed. The first protocol is centralized in nature and utilizes a specialized frame structure for co-existence with the primary network as well as handling different Quality-of-Service (QoS) requirements of M2M devices. The second protocol is a distributed cognitive MAC protocol, which is specially designed to provide high energy efficiency and reliability for M2M devices operating in challenging wireless environments. Both protocols explicitly account for the peculiarities of cognitive radio environments. The protocols have been evaluated using analytical modeling and simulation studies. Recently IETF has standardized a specially designed routing protocol for capillary M2M networks, known as RPL (Routing for Low Power and Lossy Networks). RPL is emerging as the de facto routing protocol for many M2M applications including the smart grid. On the other hand, the application of cognitive radio for smart grid communication is under active investigation in the research community. Hence, it is important to investigate the applicability and adaptation of RPL in cognitive radio environments. In this regard, an enhanced RPL based routing protocol has been proposed for cognitive radio enabled smart grid networks. The enhanced protocol provides novel modifications to RPL for protecting the primary users along with meeting the utility requirements of the secondary network. An important challenge in LTE-based cellular networks with M2M communications is the uplink radio resource management as available resources are shared between M2M devices and H2H users, having different and often conflicting QoS requirements. Apart from this, energy efficiency requirements become critically important. Further, the specific constraints of Single Carrier Frequency Division Multiple Access (SC-FDMA) complicate the resource allocation problem. In this respect, an energy efficient resource allocation algorithm for the uplink of LTE networks with M2M/H2H co-existence under statistical QoS guarantees has been developed, that is based on canonical duality theory. The proposed algorithm outperforms classical algorithms in terms of energy efficiency while satisfying the QoS requirements of M2M devices and H2H users. A new frontier in M2M communications is the nano-M2M communications, which is envisioned to create the Internet-of-Nano-Things (IoNT). Molecular communication (MC) is a promising communication technique for nano-M2M communications. In literature, no model for error performance of MC exists. Therefore, an error performance model has been developed that explicitly accounts for noise and interference effects. Since relaying and network coding based solutions are gaining popularity for nano-M2M networks, the error performance of a network coded molecular nano-M2M network has been evaluated as well. Finally, the thesis is concluded based on the overall picture of the research conducted. In addition, some directions for future work are included as well.

Single Carrier Frequency Division Multiple Access (SC-FDMA) is a multiple access transmission scheme that has been adopted in the 4th generation 3GPP Long Term Evolution (LTE) of cellular systems. In fact, its relatively low peak-to-average power ratio (PAPR) makes it ideal for the uplink transmission where the transmit power efficiency is of paramount importance. Multiple access among users is made possible by assigning different users to different sets of non-overlapping subcarriers. With the current LTE specifications, if an SC-FDMA system is operating at its full capacity and a new user requests channel access, the system redistributes the subcarriers in such a way that it can accommodate all of the users. Having less subcarriers for transmission, every user has to increase its modulation order (for example from QPSK to 16QAM) in order to keep the same transmission rate. However, increasing the modulation order is not always possible in practice and may introduce considerable complexity to the system. The technique presented in this thesis report describes a new way of adding more users to an SC-FDMA system by assigning the same sets of subcarriers to different users. The main advantage of this technique is that it allows the system to accommodate more users than conventional SC-FDMA and this corresponds to increasing the spectral efficiency without requiring a higher modulation order or using more bandwidth. During this work, special attentions wee paid to the cases where two and three source signals are being transmitted on the same set of subcarriers, which leads respectively to doubling and tripling the spectral efficiency. Simulation results show that by using the proposed technique, it is possible to add more users to any SC-FDMA system without increasing the bandwidth or the modulation order while keeping the same performance in terms of bit error rate (BER) as the conventional SC-FDMA. This is realized by slightly increasing the energy per bit to noise power spectral density ratio (Eb/N0) at the transmitters.

隨著無線通訊技術快速的發展，使用者對無線傳輸及品質的要求日益提升。第三代合作夥伴計劃3rd Generation Partnership Project (3GPP)所提出的長期演進技術Long Term Evolution (LTE)，是邁入第四代行動通訊系統(4G)的極佳選擇。其中以Single Carrier - Frequency Division Multiple Access (SC-FDMA)系統作為上行鏈路的主要通信技術。 然而，在上行SC-FDMA中有連續性資源塊配置的規定以及所配置之資源塊需使用相同調變技術的限制。一般而言資源分配的好壞會影響傳輸速率(data rate)與系統效能。因此，如何分配資源以改善傳輸速率與增進系統效能是本論文的研究重點。 目前，已有許多文獻在探討如何透過偵測頻率響應(frequency response)，解決資源分配的問題。但我們發現，透過偵測頻率響應的好壞進行優先權排班，無法有效符合現實網路服務的實際需求。在本論文中，我們擬以三階段的演算法來改善系統中資源分配的問題。第一階段，在time domain排班時根據不同的Quality of Service (QoS)特性區分User Equipment (UE)。在第二階段frequency domain排班時依據通道品質好壞決定優先權以分配無線電資源給UE。最後，我們根據SC-FDMA的兩大重要限制，提出在LTE上行系統中資源分配方法，在滿足Guaranteed Bit Rate (GBR)服務之時間延遲的限制時，亦能提升整體系統效能。 在模擬分析中，我們利用NS3進行模擬實驗分析，將我們所提出的三階段演算法在不同比例之網路服務類別的要求下，與固定子載波動態資源分配機制以及適應性動態子載波分配機制進行比較。實驗結果顯示，我們的方法在VoIP的average delay time相較於適應性動態分配法最多可改善約82.9%，real time gaming最多可改善約84.9%，而整體系統頻帶利用率(spectrum utilization)相較於固定與適應性分配機制最多可提升約15.3%。 / Long Term Evolution (LTE) is the latest standard of 3rd Generation Partnership Project (3GPP), which is one of the most promising technology for 4G mobile networks. The goal of LTE is to provide high data rate transmission, scalable bandwidth, low latency, and high-mobility. To achieve this goal, the LTE employs Orthogonal Frequency Division Multiplexing (OFDM) for downlink data transmission and Single Carrier - Frequency Division Multiple Access (SC-FDMA) for uplink transmission. This thesis focuses on the resource allocation problem of LTE SC-FDMA system. We propose a three-stage approach to improve resource allocation performance. In the first stage, we design a time domain scheduling according to different QoS features and time delay requirement to distinguish user equipment (UE). In the second stage, we design a frequency domain scheduling based on channel state information to give priorities to UEs. Finally, we propose resource allocation methods for LTE uplink under the two constraints of SC-FDMA. The proposed methods are proved to be able to meet the real-time service delay constraints and enhance overall system performance. In the simulations, the proposed three stage algorithms are compared to fixed sub-carrier dynamic resource allocation algorithm and adaptive dynamic sub-carrier algorithm against different proportions of network services. Simulation results show that our method outperforms the other two methods in terms of throughput, transmission delay and packet loss ratio.

Single Carrier Frequency Division Multiple Access (SC-FDMA) is a multiple access transmission scheme that has been adopted in the 4th generation 3GPP Long Term Evolution (LTE) of cellular systems. In fact, its relatively low peak-to-average power ratio (PAPR) makes it ideal for the uplink transmission where the transmit power efficiency is of paramount importance. Multiple access among users is made possible by assigning different users to different sets of non-overlapping subcarriers. With the current LTE specifications, if an SC-FDMA system is operating at its full capacity and a new user requests channel access, the system redistributes the subcarriers in such a way that it can accommodate all of the users. Having less subcarriers for transmission, every user has to increase its modulation order (for example from QPSK to 16QAM) in order to keep the same transmission rate. However, increasing the modulation order is not always possible in practice and may introduce considerable complexity to the system. The technique presented in this thesis report describes a new way of adding more users to an SC-FDMA system by assigning the same sets of subcarriers to different users. The main advantage of this technique is that it allows the system to accommodate more users than conventional SC-FDMA and this corresponds to increasing the spectral efficiency without requiring a higher modulation order or using more bandwidth. During this work, special attentions wee paid to the cases where two and three source signals are being transmitted on the same set of subcarriers, which leads respectively to doubling and tripling the spectral efficiency. Simulation results show that by using the proposed technique, it is possible to add more users to any SC-FDMA system without increasing the bandwidth or the modulation order while keeping the same performance in terms of bit error rate (BER) as the conventional SC-FDMA. This is realized by slightly increasing the energy per bit to noise power spectral density ratio (Eb/N0) at the transmitters.

Actualment estem entrant a una nova era de la informació amb gran demanda de sistemes de comunicació sense fils. Nous serveis com dades i video requereixen transmissions fiables d'alta velocitat, fins i tot en escenaris d'alta mobilitat. A més a més, la dificultat d'assignar el limitat espectre radioelèctric juntament amb la necessitat d'incrementar el temps de vida de les bateries dels terminals mòbils, requereix el diseny de transceptors que usin la potència i l'ampla de banda disponibles de manera eficient. Les comunicacions multiportadora basades en OFDM són capaces de satisfer la majoria d'aquests requeriments. Però, entre altres reptes, reduir la sensibilitat a la amplificació no-lineal és un factor clau durant el diseny. En aquesta tesi doctoral s'analitza la sensibilitat dels sistemes multiportadora basats en OFDM a l'amplificació no-lineal i es consideren formes eficients per superar aquest problema. La tesi s'enfoca principalment al problema de reduir les fluctuacions de l'envolupant del senyal transmès. En aquest sentit es presenta també un estudi de les mètriques de l'envolupant del senyal, PAPR i CM. A més a més, basant-nos en l'anàlisis presentat es proposen noves tècniques per sistemes OFDM i MC-SS. Per MC-SS, també es tracta el diseny d'una tècnica de postprocessament en forma de detector multiusuari per canals no-lineals. / Actualmente estamos entrando en una nueva era de la información donde se da una gran demanda de sistemas de comunicación inalámbricos. Nuevos servicios como datos y vídeo requieren transmisiones fiables de alta velocidad, incluso en escenarios de alta movilidad. Además, la dificultad de asignar el limitado espectro radioeléctrico junto con la necesidad de incrementar el tiempo de vida de las baterías de los terminales móviles, requiere el diseño de transceptores que usen eficientemente la potencia y el ancho de banda disponibles. Las comunicaciones multiportadora basadas en OFDM son capaces de satisfacer la mayoría de dichos requerimientos. Sin embargo, entre otros retos, reducir su sensibilidad a la amplificación no-lineal es un factor clave durante el diseño. En esta tesis se analiza la sensibilidad de los sistemas multiportadora basados en OFDM a la amplificación no-lineal y se consideran formas eficientes para superar dicho problema. La tesis se enfoca principalmente al problema de reducir las fluctuaciones de la envolvente. En este sentido también se presenta un estudio de las métricas de la señal, PAPR y CM. Además, basándonos en el análisis presentado se proponen nuevas técnicas para OFDM y MC-SS. Para MC-SS, también se trata el diseño de un detector multiusuario para canales no-lineales. / We are now facing a new information age with high demand of wireless communication systems. New services such as data and video require achieving reliable high-speed transmissions even in high mobility scenarios. Moreover, the difficulty to allocate so many wireless communication systems in the limited frequency band in addition to the demand for long battery life requires designing spectrum and power efficient transceivers. Multicarrier communications based on OFDM are known to fulfill most of the requirements of such systems. However, among other challenges, reducing the sensitivity to nonlinear amplification has become a design key. In this thesis the sensitivity of OFDM-based multicarrier systems to nonlinear amplification is analyzed and efficient ways to overcome this problem are considered. The focus is mainly on the problem of reducing the envelope fluctuations. Therefore, a study of the signal metrics, namely PAPR and CM, is also presented. From the presented analysis, several new techniques for OFDM and MC-SS are proposed. For MC-SS, the design of a post-processing technique in the form of a multiuser detector for nonlinearly distorted MC-SS symbols is also addressed.

Digital communication systems which use Orthogonal Frequency Division Multiplexing (OFDM) are now widely used and have many advantages. The main disadvantage is the requirement for highly linear analogue electronics including the high power amplifier (HPA). This requirement cannot be met in all circumstances because of the occurrence of symbols with high peak to average power ratio (PAPR). Such symbols may be non-linearly distorted by limiting. Approaches to solve this problem have been either to reduce the PAPR at the transmitter or to try to mitigate the effect of the non-linearity at the receiver. Soft-limiting, i.e. applying limiting in software prior to the HPA is a simple way to reduce the PAPR. It produces non-linear distortion which will cause an increase in the bit-error-rate (BER) at the receiver. This thesis surveys existing alternatives ways of reducing the effect of non-linearity and proposes some new ones. Two iterative receiver techniques, based on statistical analysis of the nature of the non-linearity, have been implemented and investigated. These are the ‘Bussgang Noise Cancellation’ (BNC) technique and the ‘Decision Aided Reconstruction’ (DAR) techniques. As these techniques are valid for any memory-less nonlinearity, an alternative form of limiting, named as Inverted-Wraparound (IWRAP) has been included in the BNC investigation. A new method is proposed which is capable of correcting the received time-domain samples that are clipped, once they have been identified. This is named the ‘Equation-Method’ and it works by identifying constellation symbols that are likely to be correct at the receiver. If there are a sufficient number of these and they are correctly identified, the FFT may be partitioned to produce a set of equations that may be solved for the clipped time-domain samples. The thesis proposes four enhancements to this new method which improve its effectiveness. It is shown that the best form of this method outperforms conventional techniques especially for severe clipping levels. The performance of these four enhancements is evaluated over channels with additive white Gaussian noise (AWGN) in addition to clipping distortion. A technique based on a ‘margin factor’ is designed to make these methods work more effectively in the presence of AWGN noise. A new combining algorithm referred as ‘HARQ for Clipping’ is presented where soft bit decisions are combined from multiple transmissions. ‘HARQ for Clipping’ has been combined with the best version of the Equation-Method, and the performance of this approach is evaluated in terms of the BER with different levels of AWGN. It has been compared to other approaches from the literature and was found to out-perform the BNC iterative receiver by 3dB at signal to noise ratios around 10dB. Without HARQ, the best version of the Equation-Method performs better than the BNC receiver, at signal-to-nose ratios above about 17dB.

Master’s thesis is focused on part of mobile network named LTE. Project is analyzes the LTE physical layer, which is divided into four basic parts: Physical channels and modulation, Multiplexing and channel coding, Physical layer procedures, Physical layer measurements. Every part is described by actual 3GPP standard [1]. To understand the problem is expected a reader basic knowledge of OFDM systems, which the LTE system uses. The next part of this master’s thesis is dedicated to mathematic model physical layer of system LTE, created by program Matlab. This model is designed to measure errors in data transmission.

Multiuser and cooperative orthogonal frequency division multiplexing(OFDM) systems are being actively researched and adopted in wireless standards, owing to their advantages of robustness to multipath fading, modularity, and ability to achieve high data rates. In OFDM based systems, perfect frequency and timing synchronization is essential to maintain orthogonality among the subcarriers at the receiver. In multiuser OFDM on the uplink, timing offsets (TOs) and/or carrier frequency offsets (CFOs) of different users, caused due to path delay differences between different users, Doppler and/or poor oscillator alignment, can destroy orthogonality among subcarriers at the receiver. This results in multiuser interference (MUI)and consequent performance degradation. In this thesis, we are concerned with the analysis and mitigation of the effect of large CFOs and TOs in multiuser OFDM systems, including uplink orthogonal frequency division multiple access (OFDMA),uplink single-carrier frequency division multiple access(SC-FDMA), and cooperative OFDM. Uplink OFDMA: In the first part of this thesis, we analytically quantify the effect of large CFOs and TOs on the signal-to-interference plus noise ratio(SINR) and uncoded bit error rate(BER) performance of uplink OFDMA on Rayleigh and Rician fading channels, and show analytical results to closely match with simulation results. Such an SINR/BER analysis for uplink OFDMA in the presence of both large CFOs as well as TOs has not been reported before. We also propose interference cancelling(IC) receivers to mitigate the performance degradation caused due to large CFOs and TOs of different users. SC-FDMA versus OFDMA: An issue with uplink OFDMA is its high peak-to-average power ratio(PAPR).Uplink SC-FDMA is proposed in the standards as a good low-PAPR alternative to uplink OFDMA; e.g., SC-FDMA has been adopted in the uplink of 3GPP LTE. A comparative investigation of uplink SC-FDMA and OFDMA from a sensitivity to large CFOs and TOs view point has not been reported in the literature. Consequently, in the second part of the thesis, we carry out a comparative study of the sensitivity of SC-FDMA and OFDMA schemes to large CFOs and TOs of different users on the uplink. Our results show that while SC-FDMA achieves better performance due to its inherent frequency diversity advantage compared to OFDMA in the case of perfect synchronization, its performance can get worse than that of OFDMA in the presence of large CFOs and TOs. We further show that use of low-complexity multistage IC techniques, with the knowledge of CFOs and TOs of different users at the receiver, can restore the performance advantage of SC-FDMA over OFDMA. Cooperative OFDM: Cooperative OFDM is becoming popular because of its ability to provide spatial diversity in systems where each node has only one antenna. In most studies on cooperative communications, perfect time synchronization among cooperating nodes is assumed. This implies that the transmissions from different cooperating nodes reach the destination receiver in orthogonal time slots. In practice, however, due to imperfect time synchronization, orthogonality among different nodes’ signals at the destination receiver can be lost, causing inter-symbol interference(ISI).In the third part of the thesis, we investigate cooperative OFDM communications using amplify-and-forward(AF) protocol at the relay, in the presence of imperfect timing synchronization. We derive analytical expressions for the ISI as function of timing offset for cooperative OFDM with AF protocol, and propose an IC receiver to mitigate the effects of timing offset induced ISI.