No description available.

Call number: LD2668 .T4 1978 W91 / Master of Science

No description available.

Fundamental investigations have been carried out on an Inductively Coupled Plasma (ICP) operated at 148 MHz, a frequency which is nearly three times higher than any previously reported for analytical ICPs used in spectrochemical analysis. High frequency operation is expected to provide easier sample introduction into the discharge, with a consequence of less energetic conditions in the central channel. Several plasma diagnostic techniques were employed in order to determine the conditions experienced by the analyte species in this source for spectrochemical analysis. Three different torch systems were investigated at 148 MHz and compared to the "standard" 27 MHz configuration. The highest excitation temperatures and electron densities were obtained in the 27 MHz configuration, and the lowest values in the largest torch at 148 MHz. Intermediate values were obtained in the intermediate-size torches at 148 MHz. These observations correlate reasonably well with the ratio of the plasma radius to the skin depth (r/s). The skin depth defines the region in which the majority of the electrical energy is deposited into the discharge, and is smaller at 148 MHz than at 27 MHz. The measurement of electron densities also allows the estimation of how closely a particular discharge approaches Local Thermal Equilibrium (LTE). As may be expected, LTE is most closely approached in the 27 MHz arrangement. The less energetic conditions characterized by lower temperatures and electron densities result in less intense analyte emission from the high frequency ICPs. Signal-to-Background ratios and detection limits reflect this trend, but the linearity of the calibration curves and freedom from vaporization interferences are not degraded. Finally, the introduction of organic solvents is much easier, and better detection limits in an organic matrix are obtained at 148 MHz. These investigations have shown the utility of classifying the effects of changing torch sizes and operating frequencies by means of the r/s ratio. This provides the analyst with a means of selecting the general range of conditions to be employed in a particular analysis.

Semiconductors are characterized by atomic resolution imaging and density of states measurements (DOS) obtained through the use of a scanning tunneling microscope (STM). The DOS of the conduction and valence bands can be measured separately with a STM as opposed to an optical measurement which measures only the joint DOS. Layered-structure semiconductors are characterized both in the bulk form and in the isolated cluster form. Images of three bulk layered-structure semiconductors, MoS₂, WSe₂, and SnS₂, were obtained with both positive and negative sample-to-tip bias voltages. Curves of tunneling current as a function of bias voltage were measured, from which the DOS of the valence and conduction bands can be inferred. We obtained an atomically resolved image of an isolated fragment of a semi-conductor cluster which was deposited on a graphite surface from a colloidal suspension of BiI₃. Also imaged were clusters of MoS₂ layered-structure semiconductors.

No description available.

No description available.

No description available.

No description available.

One strategy to manage pig slurry is centrifugation and composting of the solids fraction to produce a value added product to distribute manure nutrients further from productions sites. This study determined turned windrow composting was suitable for processing slurry solids throughout winter. It was also the first attempt at combining automated chambers and a Fourier Transform Infrared spectroscopy analyzer to measure multiple gases during the composting process; the system proved capable but captured fluxes better if conducted in an area sheltered from wind. Straw and woodshavings were shown suitable as bulking materials for composting slurry solids, however, the lack of porosity provided by woodshavings created anaerobic conditions that doubled the greenhouse gas emissions compared to those of straw, 1,126 kg CO2-equivalent Mg-1 compared to 526 kg CO2-equivalent Mg-1. Either bulking material produced compost of quality for use in agricultural or soil blending applications and was free of manure pathogens. / May 2016