Scanning tunneling microscopy has been a powerful tool in expanding our understanding in the study of condensed matter physics. Many of the exotic materials of interest exhibit rich phases of matter at different temperatures and pressures. In order to probe the rich array of phases we developed a novel technique of combining scanning tunneling microscopy with tunable temperature and tunable mechanical strain in ultra high vacuum conditions. The mechanisms that give rise to high temperature superconductivity has been a long standing problem in physics. The discovered of iron-based high temperature superconductors (pnictides) have spurred much research into the mechanisms that give rise to the different exotic states observed in these new materials in hopes to better understand the underlying nature of unconventional superconductivity. Here we present a detailed study of the Nematic ordered phase in the prototypical iron- based high temperature superconductor, NaFeAs. Using our novel strain, temperature, scanning tunneling microscopy technique, we can attain an atomic-resolution view of the effects of the nematic phase on the local density of states along with the effects of anisotropic strain on the electronic structure. We further systematically study NaFeAs along both axes of the phase diagram, tuning temperature and Cu doping. We probe the material from the parent compound to beyond the supercon- ducting dome with increased Cu doping and from superconducting temperatures towell above the structural transition temperatures. Using our novel strain, temperature, scanning tunneling microscopy technique we nanoscopically identified the region of long-range nematic order and the region of nematic fluctuations in the phase diagram and find that true long range nematic order sets in at the tetragonal to orthorhombic structural transition temperature but nematic fluctuations continue at higher temperatures and also into the overdoped regime, then seemingly disappearing at the edge of the superconducting dome. We further find that our applied stain increasing the amplitude of the nematic fluctuations showing strong nonlinear coupling between strain and electronic nematicity. The power of our novel strain, temperature, scanning tunneling microscopy tech- nique in probing quasiparticle interference proves ideal for studying the topological, Weyl semimetal 1T’-MoTe 2 . In it’s orthorombic phase the material has topologically nontrivial protected surface Fermi arcs. By measuring quasiparticle interference in this material at different temperatures we can probe both topologically nontrivial phase (orthorhombic phase) and the topologically trivial phase (monoclinic phase). In the topologically nontrivial phase we see quasiparticle interference measurements in good agreement with angular resolved photoemission spectroscopy and theoretical calculations. In the topologically trivial phase we see the lack of the quasiparticle interference coming from the trivial surface state.

Graduation date: 1996

This dissertation is focused on understanding heterogeneous metal catalysts supported on oxides using a model catalyst system of SiO2 thin film supported metal nano-clusters. The primary technique applied to this study is scanning tunneling microscopy (STM). The most important constituent of this model catalyst system is the SiO2 thin film, as it must be thin and homogeneous enough to apply electron or ion based surface science techniques as well as STM. Ultra-thin SiO2 films were successfully synthesized on a Mo(112) single crystal. The electronic and geometric structure of the SiO2 thin film was investigated by STM combined with LEED, Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS). The relationship between defects on the SiO2 thin film and the nucleation and growth of metal nano-clusters was also investigated. By monitoring morphology changes during thermal annealing, it was found that the metal-support interaction is strongly dependent on the type of metal as well as on the defect density of the SiO2 thin film. Especially, it was found that oxygen vacancies and Si impurities play an important role in the formation of Pd-silicide. By substituting Ti atoms into the SiO2 thin film network, an atomically mixed TiO2-SiO2 thin film was synthesized. Furthermore, these Ti atoms play a role as heterogeneous defects, resulting in the creation of nucleation sites for Au nano-clusters. A marked increase in Au cluster density due to Ti defects was observed in STM. A TiO2-SiO2 thin film consisting of atomic Ti as well as TiOx islands was also synthesized by using higher amounts of Ti (17 %). More importantly, this oxide surface was found to have sinter resistant properties for Au nano-clusters, which are desirable in order to make highly active Au nano-clusters more stable under reaction conditions.

As the critical dimensions of many devices, especially electronics, continue to become smaller, the ability to accurately analyze the properties at ever smaller scales becomes necessary. Optical techniques, such as confocal microscopy and various spectroscopies, have produced a wealth of information on larger length scales, above the diffraction limit. Scanning probe techniques, such as scanning tunneling microscopy and atomic force microscopy, provide information with an extremely fine resolution, often on the order of nanometers or angstroms. In this document, plasmon coupling is used to generate large signal increases, with clear future applications toward scanning probe optical spectroscopies. A variation on scanning tunneling microscopy is also used to study the surface structure of environmentally interesting nanoparticles. Traditional Raman spectroscopy is used to examine doped graphene, which is becoming a hot material for future electronic applications.

This dissertation is focused on understanding heterogeneous metal catalysts supported on oxides using a model catalyst system of SiO2 thin film supported metal nano-clusters. The primary technique applied to this study is scanning tunneling microscopy (STM). The most important constituent of this model catalyst system is the SiO2 thin film, as it must be thin and homogeneous enough to apply electron or ion based surface science techniques as well as STM. Ultra-thin SiO2 films were successfully synthesized on a Mo(112) single crystal. The electronic and geometric structure of the SiO2 thin film was investigated by STM combined with LEED, Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS). The relationship between defects on the SiO2 thin film and the nucleation and growth of metal nano-clusters was also investigated. By monitoring morphology changes during thermal annealing, it was found that the metal-support interaction is strongly dependent on the type of metal as well as on the defect density of the SiO2 thin film. Especially, it was found that oxygen vacancies and Si impurities play an important role in the formation of Pd-silicide. By substituting Ti atoms into the SiO2 thin film network, an atomically mixed TiO2-SiO2 thin film was synthesized. Furthermore, these Ti atoms play a role as heterogeneous defects, resulting in the creation of nucleation sites for Au nano-clusters. A marked increase in Au cluster density due to Ti defects was observed in STM. A TiO2-SiO2 thin film consisting of atomic Ti as well as TiOx islands was also synthesized by using higher amounts of Ti (17 %). More importantly, this oxide surface was found to have sinter resistant properties for Au nano-clusters, which are desirable in order to make highly active Au nano-clusters more stable under reaction conditions.

Thesis (Ph. D.)--University of Hong Kong, 2001. / Includes bibliographical references (leaves 95-100).

Thesis (Ph. D.)--University of Texas at Austin, 2000. / Vita. Includes bibliographical references (leaves 87-91). Available also in a digital version from Dissertation Abstracts.

Not available / text

Not available / text

An STM head based on the design of Besocke was designed and constructed to have superior vibrational and thermal stability in order to produce very high resolution images. The vibrational properties and thermal properties of the head design are quantitatively analyzed and compared to the actual performance achieved. With this new STM head, we were able to implement spectroscopic dI/dV imaging techniques (conductance imaging) to observe electronic features on surfaces. Using this conductance imaging, benzene and chlorobenzene on the Si(111)7x7 surface were studied. We also present the first solid evidence that confirms that the rest atom is involved in the bonding of benzene to this surface. We show that conductance imaging does indeed show variations in the electronic structure of the surface with adsorbates, illustrating that this technique has strong potential for assigning binding sites. / xiv, 155 leaves ; 29 cm.