Diploma thesis named Steam turbine in the combi cycle deals with design of low pressure part of three-body turbine and it’s lateral outlet throat to the air condenser. Before the design itself, the thermal schema of entire turbine is calculated. Than follows the detail draft, the strength calculations are included as well. Turbine has any technological consumption of steam or any regenerativ consumption. Turbine will be suplly to Panama. The thesis includes following drawings: cut of flowing part, design of outlet throat and fixing of inner body in outer body of low pressure part. The diploma thesis is created for Doosan Škoda Power company.

The aim of the master’s thesis is to design a condensing steam turbine based on given inputs. Firstly, a design and computation of heat balance is made, followed by thermodynamic calculation of steam turbine channel and a design of compensatory piston of axial forces. Last part of the thesis consists of a review of a change of cooling water temperature in condensator on last turbine stages. The structural drawing of longitudinal section of turbine is included as well.

Diploma thesis deals with design of a flywheel and a belt pulley of single toggle jaw crusher DCJ 900x600. The first part is dedicated to overview of the methods for calculation of a size of flywheels for working machines. The second part is focused on calculation of a size of the flywheel. The third part treats the constructional design of the flywheel. In the last two parts there is elaborated analysis of a changing size of the flywheel depended on increasing the working rotation speed and change of coefficient .

This master‘s thesis deals with thermodynamic calculation of condensing steam turbine with controlled extraction point for heat exchanger, into biomass power plant block. Rated output of steam turbine is 6.5 MW and rated output of heat exchanger is 4.5 MW. At the beginning of the thesis is explained the heat scheme and the effect of heat regeneration on the design of turbine. Attention was also paid to the heat equation of individual thermal diagram devices and the calculation of the steam mass flow rate. The next part is focused on thermodynamic calculation of the turbine, followed by mechanical stress calculations. The calculation is divided into preliminary design and detailed calculation. At the end, the performance analysis of the designed turbine is made.

Master thesis is dealing with the issue of condensate creation and removal from the Nesher Ramle steam turbine during start-up and steady state. At the beginning a preliminary calculation of heat balance and the turbine itself is done. It is followed by description and design of drainage system supplemented by calculation of the steam flow through the orifices. Steam flow calculation was done via S. D. Morris, Pavelek with Kalčík and Ambrož, all three methods were compared. The main goal is the theoretical calculation of the amount of condensate created during start-up which is influenced by its initial state from which it is started. Three default states are considered, cold, warm and hot. In the last chapter the comparison of theoretical calculation with the measured data on real turbine is done and it is supported by the evaluation of the data from the measurement of the steam turbine at steady state on maximum power and half power. From the steady state analysis, percentage of water flow to expander from the total amount of condensate formed in the turbine were obtained.

The master thesis deals with the design, tracing and dimensioning of condensate pipeline. In the beginning, a preliminary calculation of heat balance is done. It is followed by a description of the main condensate system supplemented by the computational design of pipeline and the calculation of pressure losses in this pipeline. The crucial part of the thesis is the calculation of pressure losses, which is done in two ways. The first approach to calculation of pressure losses in the pipeline is calculated using values of representative resistance coefficient for pipe ele-ments using Idelchik literature and for individual types of valves using values from datasheets of Siemens Energy suppliers. In the second approach to calculation representative resistance coefficients for pipe elements and individual types of valves CRANE literature are used. Then both approaches of choosing representative resistance coefficients are compared and evaluated. Based on the calculated values, a suitable pump is selected at the end of the master thesis.

The function analysis of instrument voltage transformer with the aid of his equivalent diagram and his phasor diagrams is main part of my masters thesis. I solve the influence and errors of his equivalent diagram’s elements on this instrument voltage transformer. Than I talk about suitable magnetic materials using for instrument voltage transformers. There are 3D pictures which show lay-out of instrument voltage transformers’s windings and his magnetic circuit.

There is information to my master's thesis which is called “Web application for NS2 training”. This application works after installation and its source codes are saved on applied CD. It is said about implement Network Simulator 2. It helps to realize simulation of nets and then author inserts information about them into web application. Registered web's visitor has possibility to insert project into application. The project contents information about simulation created in NS2. Web application can also visible detail of possible project which is approved of administrator. Then the visitor can sort projects, search entered expression or connect his contribution to discussion forum. Administrator can approve users projects in his part of application. It makes available for the others. He can also delete them from database. Theory about technologies which are used for implementation of this application. It is talked about web Apache server, database MySQL server and programmable PHP language. There is also mentioned information about security of web application included possible attacks on applications and their database. It is presented proposal of database which creates core of application. This proposal is depended on application requirements. Next chapters give to reader whole image about functionality of application. There are mentioned samples of final graphical image of application. This document also provides the shows of source codes for creating database tables.

The thesis focuses on cryptographic algorithms of low performance devices, and mutual authentication of authentication server and user using smart cards. In the first part of this thesis the cryptography, cryptographic primitives, cryptographic goals, security models and cryptographic algorithms of low performance devices are presented. The second part focuses on low performance devices as RFID tags, NFC technology, microcontrollers and smart cards (.NET cards, java cards, MIFARE cards). The practical part deals with the comparison of chosen low performance devices and measure the time required for encryption and decryption using different cryptographic algorithms on Gemalto .NET Smart Card V2+. This thesis describes and explains the three authentication schemes for mutual authentication of remote server and user using smart cards. The new authentication scheme, which is based on the second related scheme, attempts to eliminate possible security attacks and keeps efficiency. For all four authentication schemes the application is implemented to test required time for authentication of server and user using smart cards.

The master’s thesis describes development of control system for automatic mouth-organ. The process of development is divided into three parts: a concept of control system, design of hardware parts and development of software parts. Controlled device, system requirements and general design of the hardware and software components are described in the concept of control system. The detailed hardware design includes next processes: electronic component selection, printed circuit board design, assembly and debugging. The result of this chapter is electronic system, which function correctly. The aim of the last chapter is to specify and explain development of software parts of control system. Installation of required software and important aspects of control software and user interface development are described in this chapter. The goal of the thesis is to create a control system, which will function correctly and reliably.