Spelling suggestions: "subject:"schmitt trigger"" "subject:"schmitt rigger""
1 |
An Input Amplifier for Body-Channel CommunicationMaruf, Md Hasan January 2013 (has links)
Body-channel communication (BCC) is based on the principle of electrical field data transmission attributable to capacitive coupling through the human body. It is gaining importance now a day in the scenario of human centric communication because it truly offers a natural means of interaction with the human body. Traditionally, near field communication (NFC) considers as a magnetic field coupling based on radio frequency identification (RFID) technology. The RFID technology also limits the definition of NFC and thus reduces the scope of a wide range of applications. In recent years BCC, after its first origin in 1995, regain importance with its valuable application in biomedical systems. Primarily, KAIST and Philips research groups demonstrate BCC in the context of biomedical remote patient health monitoring system. BCC transceiver mainly consists of two parts: one is digital baseband and the other is an analog front end (AFE). In this thesis, an analog front end receiver has presented to support the overall BCC. The receiver (Rx) architecture consists of cascaded preamplifier and Schmitt trigger. When the signals are coming from the human body, they are attenuated around 60 dB and gives weak signals in the range of mV. A high gain preamplifier stage needs to amplify these weak signals and make them as strong signals. The preamplifier single stage needs to cascade for the gain requirement. The single stage preamplifier, which is designed with ST65 nm technology, has an open loop gain of 24.01 dB and close loop gain of 19.43 dB. A flipped voltage follower (FVF) topology is used for designing this preamplifier to support the low supply voltage of 1 V because the topology supports low voltage, low noise and also low power consumption. The input-referred noise is 8.69 nV/sqrt(Hz) and the SNR at the input are 73.26 dB. The Schmitt trigger (comparator with hysteresis) is a bistable positive feedback circuit. It builds around two stage OTA with lead frequency compensation. The DC gain for this OTA is 26.94 dB with 1 V supply voltage. The corner analyzes and eye diagram as a performance matrix for the overall receiver are also included in this thesis work.
|
2 |
A Cross-Coupled Relaxation Oscillator with Accurate Quadrature OutputsPeng, Shih-Hao 12 July 2006 (has links)
Because of IC technology evolution and the increase of market demand, the communication industry grows vigorously in recent years. The voltage-controlled oscillator plays a key role in the RF transceiver and provides oscillation signals needed for upconversin and downconvertion. Usually, we separate the signals into I/Q channels for modulation and demodulation in upconversin and downconvertion. Because the quality of the local oscillator influences the performance of communication system, designing a voltage-controlled oscillator that can provide two identical signals in accurate quadrature is necessary.
In this thesis, a new quadrature voltage-controlled oscillator is presented. We use two identical relaxation oscillators with adjustable Schmitt triggers to construct the cross-coupled architecture. This oscillator has accurate ( <1¢X) and stable quadrature outputs which are independent of operating frequency and process variations. This oscillator circuit is fabricated in TSMC 0.35£gm CMOS Mixed-Signal process provided by National Chip Implementation Center (CIC). Our design is verified by simulation and measurement results.
|
3 |
DESIGN OF HIGHER-ORDER ALL OPTICAL BINARY DELTA-SIGMA MODULATOR USING RING LASERAyed Alshammari, Marji 01 December 2018 (has links) (PDF)
The aim of this research is to investigate the performance of a bi-stable device using a single active element and to design a higher order all optical binary delta-sigma modulator (BΔΣM). A Delta sigma modulator has two important components that require enhancement to achieve robust modulation. The first component is the integrator which accumulates the error and at the same time leaks it. Here, the integrator is a single ring laser consisting of a semiconductor optical amplifier (SOA) and a filter to allow the light frequency of interest into the ring. The other component is the bi-stable device (called Schmitt trigger) that switches either ON (1) or OFF (0). There are different novel approaches to developing a bi-stable circuit. First, the coupled two ring lasers where each ring suppresses each other. Second, a novel idea that considered as a bi-stable device with single active element to achieve reduced power and reduce cost. This type of circuit is merged ring lasers with using single SOA. This system is modeled and its bistability hysteretic characteristics is investigated. The first bi-stable device is used to construct an all optical BΔΣM with 1st, 2nd and 3rd -order approaches. It performs better when the SOA bulk device is replaced by multi-quantum well (MQW) SOA.
|
Page generated in 0.041 seconds