Conventional ultrasonographic examination of the bovine ovary is based on a sequence of two-dimensional (2D) cross-section images. Day-to-day estimation of the number, size, shape and position of the ovarian follicles is one of the most important aspects of ovarian research. Computer-assisted follicle segmentation of ovarian volume can relieve physicians from the tedious manual detection of follicles, provide objective assessment of spatial relationships between the ovarian structures and therefore has the potential to improve accuracy. Modern segmentation procedures are performed on 2D images and the three-dimensional (3D) visualization of follicles is obtained from the reconstruction of a sequence of 2D segmented follicles. <p>The objective of this study was to develop a semi-automatic 3D follicle segmentation method based on seeded region growing. The 3D datasets were acquired from a sequence of 2D ultrasound images and the ovarian structures were segmented from the reconstructed ovarian volume in a single step. A seed is placed manually in each follicle and the growth of the seed is controlled by the algorithm using a combination of average grey-level, standard deviation of the intensity, newly-developed volumetric comparison test and a termination criterion. One important contribution of this algorithm is that it overcomes the boundary leakage problem of follicles of conventional 2D segmentation procedures. The results were validated against the aspiration volume of follicles, the manually detected follicles by an expert and an existing algorithm.<p>We anticipate that this algorithm will enhance follicular assessment based on current ultrasound techniques in cases when large numbers of follicles (e.g. ovarian superstimulation) obviate accurate counting and size measurement.

Conventional ultrasonographic examination of the bovine ovary is based on a sequence of two-dimensional (2D) cross-section images. Day-to-day estimation of the number, size, shape and position of the ovarian follicles is one of the most important aspects of ovarian research. Computer-assisted follicle segmentation of ovarian volume can relieve physicians from the tedious manual detection of follicles, provide objective assessment of spatial relationships between the ovarian structures and therefore has the potential to improve accuracy. Modern segmentation procedures are performed on 2D images and the three-dimensional (3D) visualization of follicles is obtained from the reconstruction of a sequence of 2D segmented follicles. <p>The objective of this study was to develop a semi-automatic 3D follicle segmentation method based on seeded region growing. The 3D datasets were acquired from a sequence of 2D ultrasound images and the ovarian structures were segmented from the reconstructed ovarian volume in a single step. A seed is placed manually in each follicle and the growth of the seed is controlled by the algorithm using a combination of average grey-level, standard deviation of the intensity, newly-developed volumetric comparison test and a termination criterion. One important contribution of this algorithm is that it overcomes the boundary leakage problem of follicles of conventional 2D segmentation procedures. The results were validated against the aspiration volume of follicles, the manually detected follicles by an expert and an existing algorithm.<p>We anticipate that this algorithm will enhance follicular assessment based on current ultrasound techniques in cases when large numbers of follicles (e.g. ovarian superstimulation) obviate accurate counting and size measurement.

Microarray technology enables simultaneous gene expression level monitoring for thousands of genes. While this technology has now been recognized as a powerful and cost-effective tool for large-scale analysis, the many systematic sources of experimental variations introduce inherent errors in the extracted data. Data is gathered by processing scanned images of microarray slides. Therefore robust image processing is particularly important and has a large impact on downstream analysis. The processing of the scanned images can be subdivided in three phases: gridding, segmentation and data extraction. To measure the gene expression levels, the processing of cDNA microarray images must overcome a large set of issues in these three phases that motivates this study. This study presents automatic gridding methods and compares their performances. Two segmentation techniques already used, the Seeded Region Growing Algorithm and the Mann-Whitney Test, are examined. We present limitations of these techniques. Finally, we studied the data extraction method used in MicroArray Suite (MS), a microarray analysis software, via synthetic images and explain its intricacies. / Master of Science

This thesis presents a 3D semi-automatic segmentation technique for extracting the lumen surface of the Carotid arteries including the bifurcation from 3D and 4D ultrasound examinations. Ultrasound images are inherently noisy. Therefore, to aid the inspection of the acquired data an adaptive edge preserving filtering technique is used to reduce the general high noise level. The segmentation process starts with edge detection with a recursive and separable 3D Monga-Deriche-Canny operator. To reduce the computation time needed for the segmentation process, a seeded region growing technique is used to make an initial model of the artery. The final segmentation is based on the inflatable balloon model, which deforms the initial model to fit the ultrasound data. The balloon model is implemented with the finite element method. The segmentation technique produces 3D models that are intended as pre-planning tools for surgeons. The results from a healthy person are satisfactory and the results from a patient with stenosis seem rather promising. A novel 4D model of wall motion of the Carotid vessels has also been obtained. From this model, 3D compliance measures can easily be obtained.

<p>This thesis presents a 3D semi-automatic segmentation technique for extracting the lumen surface of the Carotid arteries including the bifurcation from 3D and 4D ultrasound examinations. </p><p>Ultrasound images are inherently noisy. Therefore, to aid the inspection of the acquired data an adaptive edge preserving filtering technique is used to reduce the general high noise level. The segmentation process starts with edge detection with a recursive and separable 3D Monga-Deriche-Canny operator. To reduce the computation time needed for the segmentation process, a seeded region growing technique is used to make an initial model of the artery. The final segmentation is based on the inflatable balloon model, which deforms the initial model to fit the ultrasound data. The balloon model is implemented with the finite element method. </p><p>The segmentation technique produces 3D models that are intended as pre-planning tools for surgeons. The results from a healthy person are satisfactory and the results from a patient with stenosis seem rather promising. A novel 4D model of wall motion of the Carotid vessels has also been obtained. From this model, 3D compliance measures can easily be obtained.</p>

This thesis describes a set of image analysis tools developed for the purpose of quantifying the distribution of chromatin in (light) microscope images of cell nuclei. The distribution or pattern of chromatin is influenced by both external and internal variations of the cell environment, including variations associated with the cell cycle, neoplasia, apoptosis, and malignancy associated changes (MACs). The quantitative characterisation of this pattern makes possible the prediction of the biological state of a cell, or the detection of subtle changes in a population of cells. This has important application to automated cancer screening. The majority of existing methods for quantifying chromatin distribution (texture) are based on the stochastic approach to defining texture. However, it is the premise of this thesis that the structural approach is more appropriate because pathologists use terms such as clumping, margination, granulation, condensation, and clearing to describe chromatin texture, and refer to the regions of condensed chromatin as granules, particles, and blobs. The key to the structural approach is the segmentation of the chromatin into its texture primitives. Unfortunately all of the chromatin segmentation algorithms published in the literature suffer from one or both of the following drawbacks: (i) a segmentation that is not consistent with a human's perception of blobs, particles, or granules; and (ii) the need to specify, a priori, one or more subjective operating parameters. The latter drawback limits the robustness of the algorithm to variations in illumination and staining quality. The structural model developed in this thesis is based on several novel low-, med-ium-, and high-level image analysis tools. These tools include: a class of non-linear self-dual filters, called folding induced self-dual filters, for filtering impulse noise; an algorithm, based on seeded region growing, for robustly segmenting chromatin; an improved seeded region growing algorithm that is independent of the order of pixel processing; a fast priority queue implementation suitable for implementing the watershed transform (special case of seeded region growing); the adjacency graph attribute co-occurrence matrix (AGACM) method for quantifying blob and mosaic patterns in the plane; a simple and fast algorithm for computing the exact Euclidean distance transform for the purpose of deriving contextual features (measurements) and constructing geometric adjacency graphs for disjoint connected components; a theoretical result establishing an equivalence between the distance transform of a binary image and the grey-scale erosion of its characteristic function by an elliptic poweroid structuring element; and a host of chromatin features that can be related to qualitative descriptions of chromatin distribution used by pathologists. In addition, this thesis demonstrates the application of this new structural model to automated cervical cancer screening. The results provide empirical evidence that it is possible to detect differences in the pattern of nuclear chromatin between samples of cells from a normal Papanicolaou-stained cervical smear and those from an abnormal smear. These differences are supportive of the existence of the MACs phenomenon. Moreover the results compare favourably with those reported in the literature for other stains developed specifically for automated cytometry. To the author's knowledge this is the first time, based on a sizable and uncontaminated data set, that MACs have been demonstrated in Papanicolaou stain. This is an important finding because the primary screening test for cervical cancer, the Papanicolaou test, is based on this stain.

Segmentation of an image into individual tree crowns is a key step in the processing of remotely sensed data for forestry practice. The doctoral thesis gives a broad overview of this topic. It comprehends theoretical context from mathematical point of view and defines basic terms from airborne imaging and laser scanning. Mathematical methods of tree detection are focused on a robust adaptation to the actual conditions in a region of interest. A novel approach of crown area delineation is introduced, it combines a seeded region growing technique with an active contour as a crown boundary representation. The parametrisation of all algorithms is analysed in a practical half of the thesis and more application-oriented issues are mentioned. Executable computer programs are attached.