Spelling suggestions: "subject:"elective noncatalytic reduction (SNCR)"" "subject:"elective noncatalytic reduction (SNCR)""
1 |
The technology selections and cost-benefit analysis of NOx reduction measures-The case study of coal-firing boilersLin, Hsin-Yi 04 July 2006 (has links)
Abstract
The decrement of Nitrogen Oxide (NOx) emission can slow down the impaction to the natural environment as well as avoiding the global warming become worse continuously.
The three coal fired boilers in CSC were designed as capable of multi-fuel burning but its primary fuel is coal. The original designed coal is PCI coal from Australia. The NOx emission generating while using PCI coal is around 320 ppm and can,t meet the local EPA emission requirement set for year 2001, which is 300ppm. To cope with more stringent environmental requirement, the first stage strategy is to evaluate the NOx removal technologies and selecting the optimum one of them to fight against NOx emission. By means of MCDM (Multi-Criteria Decision-Making) methodologies, SNCR is chosen due to its simplicity and acceptable NOx-out ability. The 45% NOx reduction rate can be achieved and the control NOx final output will be lower than 200ppm, which is the promised level to the local EPA. In compromising the NOx reduction requirement and the practical running cost factor, the 240ppm NOx level has been determined for operating the SNCR system.
The second stage of NOx reduction evaluation is focused on the coal brands selection. It¡As believed that through the right choose of suitable coal can offer the contribution to both environment and economic. After surveying the different coal composition analysis and carrying out real trial burn, the ADARO coal from Indonesia was picked up from competition and deem as the most environment friendly coal in terms of owning the optimum coal compositions and the lowest pollutants generation including NOx, SO2, as well as ash. As a result, the ADARO coal application is highly successful in the aspects of less pollutant generation and saving cost expenditure caused by the related environment equipment systems operation and maintenance. Obviously, the positive and close relationship between environment and economic has been proved.
Base on the real evidence, this paper proves that by choosing the suitable methodologies, the NOx reduction can be accomplished to some extent. The whole environment can be benefited by this action and meanwhile the air pollution tax plus operation and maintenance cost can be reduced further. It¡As hoped that by announcing this paper, the outstanding performance of remarkable NOX reduction outcome and its coat saving advantage can be applied to the whole industrial field. Let¡As work together for the purpose of decreasing the pollutants emission, lightening the harms to the natural environment and fulfilling the duties of protection the all eco system.
Key words: Nitrogen Oxide, Selective Non-Catalytic Reduction(SNCR), environmental coal, Multi-criteria decision-making(MCDM)
|
2 |
Moderní metody denitrifikace uhelných kotlů / Modern denitrification methods of coal fired boilersNárovec, Jiří January 2015 (has links)
V současnosti musí velké energetické podniky k dodržení emisních předpisů, zejména pak vyžadovaných limitů NOx, uplatňovat denitrifikační metody. Tématem předkládané diplomové práce jsou moderních denitrifikační metody a jejich praktické uplatnění v lokálních poměrech uhelného kotle s parním výkonem 640 t.h-1 v elektrárně Počerady. Práce obsahuje rešerši moderních denitrifikačních metod používaných velkými uhelnými kotli se zaměřením zejména na sekundární denitrifikační metody. Jsou uvažovány dvě možné varianty denitrifikace – varianta 1 využívá selektivní katalytickou redukci (SCR) a varianta 2 selektivní nekatalytickou redukci (SNCR) společně s nízkoemisními hořáky a stupňovaným přívodem spalovacího vzduchu. Pro výběr vhodné denitrifikační metody jsou studovány investiční náklady jednotlivých variant – nižší investiční náklady (o 19.4%) slibuje varianta 2. Při srovnávání SCR se SNCR vyšlo najevo, že investiční náklady metody SNCR jsou 5krát nižší než metody SCR. V souladu s investičními náklady, s dispozicí kotle a se složitostí jeho instalace je pro navazující studium problematiky využita varianta 2. Stěžejní část práce se zabývá stanovením optimálního tzv. teplotního okna pro konkrétní metodu SNCR. Těžištěm práce je tepelný výpočet ohniště a části deskového přehříváku pro stanovený rozsah paliv a výkon kotle v rozmezí 60-100%. S uvažováním výsledků z výpočtu jsou navrženy dvě vstřikovací roviny, které mají zaručit vysokou efektivitu denitrifikačního procesu při uvažovaných provozních podmínkách kotle. Diplomová práce rovněž diskutuje obecnou vhodnost instalace SNCR a SCR ve stávajících uhelných kotlích.
|
3 |
Reduction of NOx Emissions in a Single Cylinder Diesel Engine Using SNCR with In-Cylinder Injection of Aqueous UreaTimpanaro, Anthony 01 January 2019 (has links)
The subject of this study is the effect of in-cylinder selective non-catalytic reduction (SNCR) of NOx emissions in diesel exhaust gas by means of direct injection of aqueous urea ((NH2)2CO) into the combustion chamber. A single cylinder diesel test engine was modified to accept an electronically controlled secondary common rail injection system to deliver the aqueous urea directly into the cylinder during engine operation.
Direct in-cylinder injection was chosen in order to ensure precise delivery of the reducing agent without the risk of any premature reactions taking place. Unlike direct in-cylinder injection of neat water, aqueous urea also works as a reducing agent by breaking down into ammonia (NH3) and Cyanuric Acid ((HOCN)3). These compounds serve as the primary reducing agents in the NOx reduction mechanism explored here. The main reducing agent, aqueous urea, was admixed with glycerol (C3H8O3) in an 80-20 ratio, by weight, to function as a lubricant for the secondary injector.
The aqueous urea injection timing and duration is critical to the reduction of NOx emissions due to the dependence of SNCR NOx reduction on critical factors such as temperature, pressure, reducing agent to NOx ratio, Oxygen and radical content, residence time and NH3 slip. From scoping engine tests at loads of 40 percent and 80 percent at 1500 rpm, an aqueous urea injection strategy was developed. The final injection strategy chosen was four molar ratios, 4.0, 2.0, 1.0 and 0.5 with five varying injection timings of 60, 20, 10, 0, and -30 degrees after top dead center (ATDC). In addition to the base line and aqueous urea tests, water injection and an 80-20 water-glycerol solution reduction agent tests were also conducted to compare the effects of said additives as well. The comparison of baseline and SNCR operation was expected to show that the urea acted as a reducing agent, lowering NOx emissions up to 100% (based on exhaust stream studies) in the diesel exhaust gas without the aid of a catalyst.
The data collected from the engine tests showed that the aqueous urea-glycerol solution secondary had no effect on the reduction of NOx and even resulted in an increase of up to 5% in some tests. This was due to the low average in-cylinder temperature as well as a short residence time, prohibiting the reduction reaction from taking place. The neat water and water-glycerol solution secondary injection was found to have a reduction effect of up to 59% on NOx production in the emissions due to the evaporative cooling effect and increased heat capacity of the water.
|
Page generated in 0.448 seconds