Techniques for preliminary analysis of various tall building systems subjected to lateral loads have been studied herein. Three computer programs written in Matlab® graphical user interface language for use on any personal computer are presented. Two of these programs incorporate interactive graphics. A program called Wall_Frame_2D is introduced for two-dimensional analysis of shear wall-frame interactive structures, using the shear-flexural cantilever analogy. The rigid outrigger approach was utilized to develop a program called Outrigger Program to analyze multi-outrigger braced tall buildings. In addition, a program called Frame Tube was developed which allows analysis of single and quad-bundled framed tube structures. The tube grids are replaced with an equivalent orthotropic plate, and the governing differential equations are solved in closed form. Results for lateral deflections, rotations, and moment, shear, and torque distributions within the various resisting elements are compared against other preliminary and "exact" matrix analysis methods for several examples. SAP2000 was used to obtain "exact" results. The approximate analyses are found to give reasonable results and a fairly good indication of the behavior of the actual structure. These programs are proposed for inclusion in a knowledge-based approach to preliminary tall building design. The tall building design process is outlined and criteria are given for the incorporation of these "Resource Level Knowledge Modules" into an integrated tall building design system.

The purpose of this study is to model and analyze the nonplanar shear wall assemblies of shear wall-frame structures. Two three dimensional models, for open and closed section shear wall assemblies, are developed. These models are based on conventional wide column analogy, in which a planar shear wall is replaced by an idealized frame structure consisting of a column and rigid beams located at floor levels. The rigid diaphragm floor assumption, which is widely used in the analysis of multistorey building structures, is also taken into consideration. The connections of the rigid beams are released against torsion in the model proposed for open section shear walls. For modelling closed section shear walls, in addition to this the torsional stiffness of the wide columns are adjusted by using a series of equations. Several shear wall-frame systems having different shapes of nonplanar shear wall assemblies are analyzed by static lateral load, response spectrum and time history methods where the proposed methods are used. The results of these analyses are compared with the results obtained by using common shear wall modelling techniques.