Spelling suggestions: "subject:"shift 3factor"" "subject:"shift 4factor""
1 |
Measuring and predicting sealant adhesionShephard, Nick E. 06 June 2008 (has links)
Current sealant test methods do not lend themselves well to the measurement and prediction of sealant performance. T he objective of this work was to demonstrate that measurement of sealant material properties as a function of temperature and relative humidity for a specific sealant and substrate can be used to predict the long term performance of sealant joints independent of the joint geometry.
The material properties of a silicone sealant were characterized as a function of temperature, relative humidity and test rate. The fracture energy of the silicone sealant bonded to glass, aluminum or stainless steel was measured with the 180° peel, the 45° peel and the pure shear butt joint test methods. Scanning electron microscopy, electron spectroscopy for chemical analysis and atomic force microscopy were used to analyze the failure surfaces.
The failure mode for silicone sealant on aluminum changes from near the aluminum oxide layer to cohesive in the sealant when the relative humidity is less than 35%. The temperature shift factor was not related to the WLF theory but worked well with an Arrhenius theory. The activation energy for the fracture process was 31.2 kcal/mol.
Crack growth data for an expansion joint was calculated for the weather conditions in Miami, Florida and Wittman, Arizona using the climate data obtained for the year 1994. For both climates, the nearly all the crack growth occurred during the winter months. The predicted annual crack growth data for Miami was 0.7 mm and the predicted annual crack growth for Wittman was 3.7 mm.
The fracture energy of the silicone/stainless steel joint is proportional to the amount of PDMS left on the surface. Carbonaceous contamination is not displaced by the sealant. Contamination inhibits primary bonding (ionic or covalent) and results in a lower fracture energy. Roughness increases the fracture energy; and this effect is more pronounced when the surfaces are cleaner. Water lowers the fracture energy especially for the dirtier surfaces. Roughness reduces the effect of the water damage but doesn’t eliminate it. / Ph. D.
|
2 |
Characterization of mechanical properties for polyethylene gas pipe materialsPopelar, Carl Frank January 1989 (has links)
No description available.
|
3 |
The Role of Penetrant Structure on the Transport and Mechanical Properties of a Thermoset AdhesiveKwan, Kermit S. Jr. 24 August 1998 (has links)
In this work the relationships between penetrant structure, its transport properties, and its effects on the mechanical properties of a polymer matrix were investigated. Although there is a vast amount of data on the diffusion of low molecular weight molecules into polymeric materials and on the mechanical properties of various polymer-penetrant systems, no attempts have been made to inter-relate the two properties with respect to the chemical structure of the diffusant. Therefore, two series of penetrants - n-alkanes and esters - were examined in this context, with the goal of correlating molecular size, shape, and chemical nature of the penetrant to its final transport and matrix mechanical properties. These correlations have been demonstrated to allow quantitative prediction of one property, given a reasonable set of data on the other parameters.
A series of n-alkanes (C6-C17) and esters (C5-C17) have been used to separate the effects of penetrant size and shape, from those due to polymer-penetrant interactions, in the diffusion through a polyamide polymeric adhesive. These effects have been taken into account in order to yield a qualitative relationship that allows for prediction of diffusivity based upon penetrant structural information. Transport properties have been analyzed using mass uptake experiments as well as an in-situ FTIR-ATR technique to provide detailed kinetic as well as thermodynamic information on this process.
The phenomenon of diffusion and its effects on the resulting dynamic mechanical response of a matrix polymeric adhesive have been studied in great detail using the method of reduced variables. The concept of a diffusion-time shift factor (log aDt) has been introduced to create doubly-reduced master curves, taking into account the effects of temperature and the variations in the polymer mechanical response due to the existence of a low molecular weight penetrant. / Ph. D.
|
4 |
Dynamic Mechanical Thermal Analysis of PolyoxymethyleneAsare, Richard January 2024 (has links)
This thesis, conducted in collaboration with IKEA Components, explores the rate-temperature dependence of polyoxymethylene (POM) thermoplastic using dynamic mechanical thermal analysis (DMTA). A force-controlled DMTA study was carried out, and the experimental data were processed to derive the complex, storage, and loss modulus. Master curves were constructed using the time-temperature superposition (TTS) method, comparing the Arrhenius and William-Landel-Ferry (WLF) equations. Additionally, a master curve was manually created by shifting isothermal material properties. This manual curve was then compared to those generated using standard equations. The study found that the storage modulus was the dominant phenomenon in POM, with the loss modulus showing distortion likely due to measurement noise. Results indicated a slight softening of the storage modulus with increased cyclic loading. The manually constructed master curve was more coherent compared to those derived from the Arrhenius and WLF equations.
|
Page generated in 0.0281 seconds