This thesis deals with switched mode power supplies based on resonant principle to achieve high efficiency. Several ways of switched mode power supplies optimalisation are described as part of the work to achieve better efficiency. Priparily, the new generation of switching elements based on SiC and resonant topology are used to achieve significant switching loss minimization. The selected resonant topology is simualted in detail and then built with focus on high efficiency. The main content of the work consists in the design and realization of the switched mode power supply with selected control algorithms and their comparison. The problems associated with usage of new SiC MOSFET generation in TO-247-4L package are being solved within the design and implementation of the power source. To solve the main problems, new 3rd SiC MOSFET gate driver was developer for working with switching frequencies in hundreds of kHz and resisting very high voltage stress on the controlled transistor. The next part of the gate driver is the overcurrent protection. The overcurrent limit can be set easily by changing one component. This protection reacts very quickly in hundreds of nanoseconds, so it is capable of saving the converter even in branch failure and going to hard short circuit. The functional sample of the series resonant converter was built and revated in the work. The converter based on 3. Generation of SiC MOSFET transistors from Cree in a modern case TO-247-4L was built. For this inverter, it was also necessary to develop both the control scheme and the resonance frequency tracking to achieve accurate switching and thus achieve the use of the resonant principle of the converter to the maximum extent possible. The result of this work is up to 3 kW converter with adjustable output voltage while maintaining high efficiency up to 96%.

The intentions of the so-called "More Electrical Aircraft" (MEA) are higher efficiency and lower weight. A main topic here is the application of electrical instead of hydraulical, pneumatical and mechanical systems. The necessary power electronic devices have intermediate DC-links, which are typically supplied by a three-phase system with active B6 and passive B12 rectifiers. A possible alternative is the B6 diode bridge in combination with an active power filter (APF). Due to the parallel arrangement, the APF offers a higher power density and is able to compensate for harmonics from several devices. The use of the diode bridge rectifier alone is not permitted due to the highly distorted phase current. The following investigations are dealing with the development of an active power filter for a three-phase supply with variable frequency from 360 to 800 Hz. All relevant components such as inductors, EMC-filters, power modules and DC-link capacitor are designed. A particular focus is put on the customized power module with SiC-MOSFETs and SiC-diodes, which is characterized electrically and thermally. The maximum supply frequency slope has a value of 50 Hz/ms, which requires a high dynamic and robustness on the control algorithm. Furthermore, the content of 5th and 7th harmonics must be reduced to less than 2 %, which demands a high accuracy. To cope with both requirements, a two-stage filter algorithm is developed and implemented in two independent signal processors. Simulations and laboratory experiments confirm the performance and robustness of the control algorithm. This work comprehensively presents the design of aerospace rectifiers. The results were published in conferences and patents. / Hauptziele des sogenannten "More Electrical Aircraft" (MEA) sind Effizienzerhöhung und Gewichtseinsparung. Ein Schwerpunkt hierbei ist die Nutzung von elektrischen statt hydraulischen, pneumatischen und mechanischen Systemen. Die notwendigen Leistungselektroniken haben DC-Zwischenkreise, welche mittels aktiven B6 und passiven B12 Gleichrichtern aus dem Dreiphasennetz gespeist werden. Eine mögliche Alternative ist die B6 Diodenbrücke in Kombination mit einem aktiven Netzfilter, welcher aufgrund der parallelen Anordnung eine höhere Leistungsdichte aufweist und darüber hinaus mehrere Geräte gleichzeitig entstören kann. Die alleinige Nutzung einer Diodenbrücke ist aufgrund des hohen Anteils von Stromharmonischen nicht zulässig. Diese Arbeit beschäftigt sich mit der Entwicklung eines aktiven Filters für ein Dreiphasensystem mit variabler Frequenz von 360 bis 800 Hz. Es werden alle relevanten Bauteile wie Induktivitäten, EMV-Filter, Leistungsmodule und Zwischenkreiskondensator ausgelegt. Besonderes Augenmerk liegt auf dem kundenspezifischen Modul mit SiC-Dioden und SiCMOSFETs, welches vollständig elektrisch und thermisch charakterisiert wird. Die Änderung der Netzfrequenz beträgt bis zu 50 Hz/ms, was eine hohe Dynamik und Robustheit von der Filterregelung verlangt. Weiterhin ist im statischen Fall eine hohe Genauigkeit gefordert, da die 5. und 7. Harmonische auf unter 2% geregelt werden müssen. Um beiden Anforderungen gerecht zu werden, wird ein zweistufiger Regelungsalgorithmus entwickelt der auf zwei digitalen Signalprozessoren implementiert wird. Simulationen und Labormessungen bestätigen die Robustheit des Regelungskonzeptes. Diese Arbeit stellt umfassend die Entwicklung von Luftfahrtgleichrichtern dar. Die Ergebnisse wurden in Konferenzen und Patenten veröffentlicht.