Deployment of Dynamic Differential Logics (DDL) appears to be a promising choice for providing resistance against leakage of side channel information. However, the resistance provided by these logics is too costly for widespread area-constrained applications. Implementation of a secure DDL-based countermeasure also requires a complex layout methodology for balancing the load at the differential outputs. This thesis, unlike previous logic level approaches, presents a novel exploitation of static and single-ended logic for designing the side channel countermeasure. The proposed technique is used in the implementation of a protected crypto core consisting of the AES ???AddRoundKey??? and ???SubByte??? transformation. The test chip including the protected and unprotected crypto cores is fabricated in 180nm CMOS technology. A correlation analysis on the unprotected core results in revealing the key at the output of the combinational networks and the registers. The quality of the measurements is further improved by introducing an enhanced data capturing method that inserts a minimum power consuming input as a reference vector. In comparison, no key-related information is leaked from the protected core even with an order of magnitude increase in the number of averaged traces. For the first time, fabricated chip results are used to validate a new logic level side channel countermeasure that offers lower area and reduced circuit design complexity compared to the DDL-based countermeasures. This thesis also provides insight into the side channel vulnerability of cryptosystems in sub-90nm CMOS technology nodes. In particular, data dependency of leakage power is analyzed. The number of traces to disclose the key is seen to decrease by 35% from 90nm to 45nm CMOS technology nodes. Analysis shows that the temperature dependency of the subthreshold leakage has an important role in increasing the ability to attack future nanoscale crypto cores. For the first time, the effectiveness of a circuit-based leakage reduction technique is examined for side channel security. This investigation demonstrates that high threshold voltage transistor assignment improves resistance against information leakage. The analysis initiated in this thesis is crucial for rolling out the guidelines of side channel security for the next generation of Cryptosystem.

The traditional model of cryptography examines the security of the cipher as a mathematical function. However, ciphers that are secure when specified as mathematical functions are not necessarily secure in real-world implementations. The physical implementations of ciphers can be extremely difficult to control and often leak socalled side-channel information. Side-channel cryptanalysis attacks have shown to be especially effective as a practical means for attacking implementations of cryptographic algorithms on simple hardware platforms, such as smart-cards. Adversaries can obtain sensitive information from side-channels, such as the timing of operations, power consumption and electromagnetic emissions. Some of the attack techniques require surprisingly little side-channel information to break some of the best known ciphers. In constrained devices, such as smart-cards, straightforward implementations of cryptographic algorithms can be broken with minimal work. Preventing these attacks has become an active and a challenging area of research. Power analysis is a successful cryptanalytic technique that extracts secret information from cryptographic devices by analysing the power consumed during their operation. A particularly dangerous class of power analysis, differential power analysis (DPA), relies on the correlation of power consumption measurements. It has been proposed that adding non-determinism to the execution of the cryptographic device would reduce the danger of these attacks. It has also been demonstrated that asynchronous logic has advantages for security-sensitive applications. This thesis investigates the security and performance advantages of using a network-based asynchronous architecture, in which the functional units of the datapath form a network. Non-deterministic execution is achieved by exploiting concurrent execution of instructions both with and without data-dependencies; and by forwarding register values between instructions with data-dependencies using randomised routing over the network. The executions of cryptographic algorithms on different architectural configurations are simulated, and the obtained power traces are subjected to DPA attacks. The results show that the proposed architecture introduces a level of non-determinism in the execution that significantly raises the threshold for DPA attacks to succeed. In addition, the performance analysis shows that the improved security does not degrade performance.