The conventional approach to validate the analog and mixed signal designs utilizes extensive SPICE-level simulations. The main challenge in this approach is to know when all important corner cases have been simulated. An alternate approach is to use the formal verification techniques. Formal verification techniques have gained wide spread popularity in the digital design domain; but in case of analog and mixed signal designs, a large number of test scenarios need to be designed to generate sufficient simulation traces to test out all the specified system behaviours. Analog and mixed signal designs can be formally modeled as hybrid systems and therefore techniques used for formal analysis and verification of hybrid systems can be applied to the analog and mixed signal designs. Generally, formal verification tools for hybrid systems work at the abstract level where we model the systems in terms of differential equations or algebraic equations. However the analog and mixed signal system designers are very comfortable in designing the circuits at the transistor level. To bridge the gap between abstraction level verification and the designs validation which has been implemented at the transistor level, the very important issue we need to address is: Can we formally verify the circuits at the transistor level itself? For this we have proposed a framework for doing the formal verification of analog and mixed signal designs using SPICE simulation traces in one of the hybrid systems formal verification tools (i.e. Checkmate from CMU). An extension to a formal verification approach of hybrid systems is proposed to verify analog and mixed signal (AMS) designs. AMS designs can be formally modeled as hybrid systems and therefore lend themselves to the formal analysis and verification techniques applied to hybrid systems. The proposed approach employs simulation traces obtained from an actual design implementation of AMS circuit blocks (for example, in the form of SPICE netlists) to carry out formal analysis and verification. This enables the same platform used for formally validating an abstract model of an AMS design to be also used for validating its different refinements and design implementation, thereby providing a simple route to formal verification at different levels of implementation. Our approach has been illustrated through the case studies using simulation traces form the different frameworks i.e. Simulink/Stateflow framework and the SPICE simulation traces. We demonstrate the feasibility of our approach around the Checkmate and the case studies for hybrid systems and the analog and mixed signal designs.

Fundação Carlos Chagas Filho de Amparo a Pesquisa do Estado do Rio de Janeiro / Nesta dissertação é apresentado um estudo sobre a recuperação de sinais modelados por somas ponderadas de exponenciais complexas. Para tal, são introduzidos conceitos elementares em teoria de sinais e sistemas, em particular, os sistemas lineares invariantes no tempo, SLITs, que podem ser representados matematicamente por equações diferenciais, ou equações de diferenças, para sinais analógicos ou digitais, respectivamente. Equações deste tipo apresentam como solução somas ponderadas de exponenciais complexas, e assim fica estabelecida a relação entre os sistemas de tipo SLIT e o modelo em estudo. Além disso, são apresentadas duas combinações de métodos utilizadas na recuperação dos parâmetros dos sinais: métodos de Prony e mínimos quadrados, e métodos de Kung e mínimos quadrados, onde os métodos de Prony e Kung recuperam os expoentes das exponenciais e o método dos mínimos quadrados recupera os coeficientes lineares do modelo. Finalmente, são realizadas cinco simulações de recuperação de sinais, sendo a última, uma aplicação na área de modelos de qualidade de água. / A study on the recovery of signals modeled by weighted sums of complex exponentials complex is presented. For this, basic concepts of signals and systems theory are introduced. In particular, the linear time invariant systems (LTI Systems) are considered, which can be mathematically represented by differential equations or difference equations, respectively, for analog or digital signals. The solution of these types of equations is given by a weighted sum of complex exponentials, so the relationship between the LTI Systems and the model of study is established. Furthermore, two combinations of methods are used to recover the parameters of the signals: Prony and least squares methods, and Kung and least squares methods, where Prony and Kung methods are used to recover the exponents of the exponentials and the least square method is used to recover the linear coefficients of the model. Finally, five simulations are performed for the recovery of signals, the last one being an application in the area of water quality models.

Fundação Carlos Chagas Filho de Amparo a Pesquisa do Estado do Rio de Janeiro / Nesta dissertação é apresentado um estudo sobre a recuperação de sinais modelados por somas ponderadas de exponenciais complexas. Para tal, são introduzidos conceitos elementares em teoria de sinais e sistemas, em particular, os sistemas lineares invariantes no tempo, SLITs, que podem ser representados matematicamente por equações diferenciais, ou equações de diferenças, para sinais analógicos ou digitais, respectivamente. Equações deste tipo apresentam como solução somas ponderadas de exponenciais complexas, e assim fica estabelecida a relação entre os sistemas de tipo SLIT e o modelo em estudo. Além disso, são apresentadas duas combinações de métodos utilizadas na recuperação dos parâmetros dos sinais: métodos de Prony e mínimos quadrados, e métodos de Kung e mínimos quadrados, onde os métodos de Prony e Kung recuperam os expoentes das exponenciais e o método dos mínimos quadrados recupera os coeficientes lineares do modelo. Finalmente, são realizadas cinco simulações de recuperação de sinais, sendo a última, uma aplicação na área de modelos de qualidade de água. / A study on the recovery of signals modeled by weighted sums of complex exponentials complex is presented. For this, basic concepts of signals and systems theory are introduced. In particular, the linear time invariant systems (LTI Systems) are considered, which can be mathematically represented by differential equations or difference equations, respectively, for analog or digital signals. The solution of these types of equations is given by a weighted sum of complex exponentials, so the relationship between the LTI Systems and the model of study is established. Furthermore, two combinations of methods are used to recover the parameters of the signals: Prony and least squares methods, and Kung and least squares methods, where Prony and Kung methods are used to recover the exponents of the exponentials and the least square method is used to recover the linear coefficients of the model. Finally, five simulations are performed for the recovery of signals, the last one being an application in the area of water quality models.