We applied single-molecule fluorescence (SMF) methods to probe the properties of individual fluorescent probes, and to characterize the proteins of interest to which these probes were attached. One remarkable advantage of SMF spectroscopy is the ability to investigate heterogeneous subpopulations of the ensemble, which are buried in ensemble averaging in other measurements. Other advantages include the ability to probe the entire dynamic sequences of a single molecule transitioning between different conformational states. For the purpose of having an extended observation of single molecules, while maintaining the native nanoscale surroundings, we developed an improved vesicle preparation method for encapsulating scarce biological samples. SMF investigations revealed that molecules trapped in vesicles exhibit nearly ideal single-emitter behavior, which therefore recommends the vesicle encapsulation for reproducible and reliable SMF studies. Hyperactive Signal-Transducer-and-Activator-of-Transcription 3 (STAT3) protein contributes significantly to human cancers, such as leukemia and lymphoma. We have proposed a novel therapeutic strategy by designing a cholesterol-based protein membrane anchor (PMA), to tether STAT3 to the cell membrane and thus inhibit unwanted transcription at the cell nucleus. We designed in vitro proof-of-concept experiments by encapsulating STAT3 and PMAs in phospholipid vesicles. The efficiency and the stability of STAT3 anchoring in the lipid membrane were interrogated via quantitative fluorescence imaging and multiparameter SMF spectroscopy. Our in vitro data paved the way for the in vivo demonstration of STAT3 inhibition in live cells, thus demonstrating that PMA-induced protein localization is a conceptually viable therapeutic strategy. The recent discovery of intrinsically disordered proteins (IDPs) highlights important exceptions to the traditional structure-function paradigm. SMF methods are very suited for probing the properties of such highly heterogeneous systems. We studied in detail the effects of electrostatics on the conformational disorder of an IDP protein, Sic1 from yeast, and found that the electrostatic repulsion is a major factor controlling the dimensions of Sic1. Based on our data we also conclude that a rod-like shape seems a better candidate than a random Gaussian chain to describe and predict the behavior of Sic1.

Single molecule studies of enzymes have revealed that nominally identical individual enzyme molecules are functionally heterogeneous. Different individual molecules exhibit different catalytic rates under identical conditions, and individual enzyme molecules show fluctuating rates over broad timescales. The structural basis and the biological sources for such heterogeneity remains poorly understood. Herein, studies are presented of the β-galactosidase from Escherichia coli, using capillary electrophoresis with laser-induced fluorescence (CE-LIF), to investigate the sources of catalytic heterogeneity at the single molecule level. Limited proteolysis as a possible source for single molecule heterogeneity, and for the changes in activity of a population of individual molecules over time, was investigated by inducing enzyme expression in two E.coli strains in the presence of a broad spectrum of protease inhibitors. The effect of protease inhibitors was found to be limited. β-Galactosidase was expressed from a lacZ linear template from two different E. coli strains using an in vitro protein expression system to determine if in vitro synthesized enzyme was identical to its in vivo counterpart. In vitro synthesized enzyme was found to be less active than in vivo sources. The differences were attributed to deficient N-terminal methionine removal and the higher rates of translation error associated with in vitro protein synthesis. Single molecule separations revealed that individual molecules of β-galactosidase were electrophoretically distinct, and that the electrophoretic heterogeneity was independent of source of enzyme, method of measurement, or of capillary coating. Electrophoretic modeling indicated that slight variation of hydrodynamic radius is the most likely source of electrophoretic mobility heterogeneity. The extent of single molecule catalytic variation was reduced in a mutant with a hyperaccurate translation phenotype implying that translation error is a source of the heterogeneity. Streptomycin-induced translation error reduced average activity, but did not lead to an increase in catalytic heterogeneity. No relationship between translation error and electrophoretic heterogeneity was observed. A novel CE-LIF assay was developed for the continuous monitoring of the catalytic activity and electrophoretic mobility of individual β-galactosidase molecules. Thermally-induced catalytic fluctuations were observed suggesting that individual enzyme molecules were capable of conformational fluctuations that supported different catalytic rates.

Over the past decade, solid-state nanopores have emerged as a versatile tool for the detection and characterization of single molecules, showing great promise in the field of personalized medicine as diagnostic and genotyping platforms. While solid-state nanopores offer increased durability and functionality over a wider range of experimental conditions compared to their biological counterparts, reliable fabrication of low-noise solid-state nanopores remains a challenge. In this thesis, a methodology for treating nanopores using high electric fields in an automated fashion by applying short (0.1-2 s) pulses of 6-10 V is presented which drastically improves the yield of nanopores that can be used for molecular recognition studies. In particular, this technique allows for sub-nanometer control over nanopore size under experimental conditions, facilitates complete wetting of nanopores, reduces noise by up to three orders of magnitude and rejuvenates used pores for further experimentation. This improvement in fabrication yield (over 90%) ultimately makes nanopore-based sensing more efficient, cost-effective and accessible. Tuning size using high electric fields facilitates nanopore fabrication and improves functionality for single-molecule experiments. Here, the use of nanopores for the detection of DNA-protein complexes is examined. As proof-of-concept, neutravidin bound to double-stranded DNA is used as a model complex. The creation of the DNA-neutravidin complex using polymerase chain reaction with biotinylated primers and subsequent purification and multiplex creation is discussed. Finally, an outlook for extending this scheme for the identification of proteins in a sample based on translocation signatures is presented which could be implemented in a portable lab-on-a-chip device for the rapid detection of disease biomarkers.

Cytoplasmic dynein is a ubiquitous minus-end directed motor protein that is essential for a variety of cellular processes ranging from cargo transport to spindle and chromosome positioning. Specifically, in fission yeast during meiotic prophase, the fused nucleus follows the spindle pole body in oscillatory movements from one cell pole to the other. The three molecular players that are essential to this process are: (i) the motor protein dynein, which powers the movement of the nucleus, (ii) microtubules, which provide the tracts for the movement and (iii) Num1, the anchor protein of dynein at the cortex. Dyneins that are localized to the anchor protein at the cortex and simultaneously bound to the microtubule emanating from the spindle pole body, pull on that microtubule leading to the movement of the nucleus. The spindle pole body, by virtue of its movement establishes a leading and a trailing side. Previous work by Vogel et al. has elucidated the mechanism of these oscillations as that of asymmetric distribution of dynein between the leading and trailing sides. This differential distribution is a result of the load-dependent detachment of dynein preferentially from the trailing microtubules. This self-organization model for dynein, however, requires a continuous redistribution of dynein from the trailing to the leading side. In addition, dyneins need to be bound to the anchor protein to be able to produce force on the microtubules. Anchored dyneins are responsible for many other important processes in the cell such as spindle alignment and orientation, spindle separation and rotation. So we set out to elucidate the mechanism of redistribution of dynein as well as the targeting mechanism of dynein from the cytoplasm to cortical anchoring sites where they can produce pulling force on microtubules. By employing single-molecule observation using highly inclined laminated optical sheet (HILO) microscopy and tracking of fluorescently-tagged dyneins using a custom software, we were able to show that dyneins redistributed in the cytoplasm of fission yeast by simple diffusion. We also observed that dynein bound first to the microtubule and not directly to the anchor protein Num1. In addition, we were able to capture unbinding events of single dyneins from the microtubule to the cytoplasm. Surprisingly, dynein bound to the microtubule exhibited diffusive behaviour. The switch from diffusive to directed movement required to power nuclear oscillations occurred when dynein bound to its cortical anchor Num1. In summary, dynein employs a two-step targeting mechanism from the cytoplasm to the cortical anchoring sites, with the attachment to the microtubule acting as the intermediate step.

Bacterial cells reproduce by doubling in size and dividing. The molecular control systems which regulate the cell cycle must do so in a manner which maintains a similar cell size over many generations. A cell can under conditions of fast growth conclude cell cycles in shorter time than the time required to replicate its chromosome. Under such conditions several rounds of replication are maintained in parallel and a cell will inherit replication processes which were initiated by an ancestor. To accomplish this the cell has to initiate and terminate one round of replication during each cell cycle. To investigate the effects of the cell cycle on gene-regulation in the gut bacterium Escherichia coli, an experimental method combining microfluidics, single molecule fluorescence microscopy and automated analysis capable of acquiring an arbitrary number of complete cell cycles per experiment was developed. The method allowed for the rapid exchange of the chemical environment surrounding the cells. Using this method it was possible to measure the dissociation time of the transcription factor molecule, LacI-Venus, from the native lactose operator sequence, lacO1, and an artificially strong operator, lacOsym, in vivo. The results indicated that regulation of gene-expression from the lactose operon does not occur at equilibrium in living cells. Furthermore, by studying the intracellular location of non-specifically interacting transcription factor molecules it was possible to determine that these do not form long-lived gradients inside the cell as was previously proposed. By studying the replication machinery and the origin of replication it was found that replication is initiated according to a cell volume per origin which did not vary over different growth conditions. Further, division timing was found to be determined by the initiation event to occur after a fixed time-delay. A consequence of this mode of regulation is an uncertainty relation between the size at birth and the cell cycle time, in which cells will vary more in in the cycle time during conditions of slow growth as compared to fast growth and vary more in birth length during conditions of fast growth as compared to slow growth.

One of the pressing needs in the field of disease biomarker discovery is new technologies that could allow high performance protein analysis in different types of clinical material, such as blood and solid tissues. This thesis includes four approaches that address important limitations of current technologies, thus enabling highly sensitive, specific and parallel protein measurements. Paper I describes a method for sensitive singleplex protein detection in complex biological samples, namely solid phase proximity ligation assay (SP-PLA). SP-PLA exhibited improved sensitivity compared to conventional sandwich immunoassays. We applied SP-PLA to validate the potential of GDF-15 as a biomarker for cardiovascular disease.   Paper II describes ProteinSeq, a multiplexed immunoassay based on the principle of SP-PLA, for parallel detection of 36 proteins using next-generation sequencing as readout. ProteinSeq exhibited improved sensitivity compared to multiplexed sandwich immunoassays, and the potential to achieve even higher levels of multiplexing while preserving a high sensitivity and specificity. We applied ProteinSeq to analyze 36 proteins, including one internal control, in 5 μl of plasma samples in a cohort of patients with cardiovascular disease and healthy controls. Paper III describes PLA-DTM, a strategy for recording all possible interactions between sets of proteins in clinical samples. Individual proteins and their interactions are first encoded to dual barcoded DNA by PLA, and the barcodes are interrogated by a method named dual tag microarray (DTM). We applied the method for studying interactions among protein members of the NFκB signaling pathway. Paper IV describes a novel probing strategy for analyzing individual biomolecules in solution or in situ. The technique employs a new class of probes for unfolding proximity ligation assays - uPLA probes. The probes are designed so that each probe set is sufficient in forming and replicating circular DNA reporter, without interactions among themselves when incubated with the sample. The uPLA probing strategy provides ease in the design of multiple probe sets in parallelized assays while enhancing the specificity of detection. We used the uPLA probes to detect various targets, including synthetic DNA and cancer-related transcripts in situ.

<p>Every living cell faces a multitude of DNA threats in its lifetime because damage to DNA is intrinsic to life itself. A double-strand break (DSB) is the most cytotoxic type of DNA damage and is a potent inducer of chromosomal aberrations. Defects in DSB repair are a major driver of tumorigenesis and are associated with numerous developmental, neurological and immunological disorders. To counteract the deleterious effects of DSBs, organisms have evolved a homologous repair (HR) mechanism that is highly precise. The key to its error-free nature lies in its use of a homologous template in restoring the DSB and its preferential occurrence during late S and G2 phase of the cell cycle when identical sister chromatids are available as templates for repair. However, HR can also engage homologous chromosomes and ectopic substrates that share homology, resulting in mitotic loss-of-heterozygosity (LOH) and unwanted chromosomal aberrations. In this case, understanding of the underlying mechanisms and molecular factors that influence accurate sequence transfer and exchange between two homologous substrates becomes crucial. </p><p>The focus of this dissertation is examination of the genetic factors and molecular processes occurring at early intermediate steps (DNA end resection and DNA synthesis) of mitotic recombination in Saccharomyces cerevisiae. To model DSB repair, we established a unique plasmid-based assay with a small 8-base pair (bp) gap in the middle of an 800-bp plasmid substrate. To delineate the molecular structures of strand exchange intermediates during HR, we used a 2% diverged plasmid substrate relative to a chromosomal repair template to generate mismatch-containing heteroduplex DNA (hetDNA) intermediates. The assay was performed in a mismatch repair (MMR)-defective background allowing hetDNA to persist and to segregate into daughter cells at the next round of replication. Unexpectedly, even when MMR was inactivated, sequence analysis of the recombinants revealed patches of gene conversion and restoration reflecting mismatch correction within hetDNA tracts. We showed that, in this system, MMR and nucleotide excision repair (NER) correct mismatches via two different mechanisms. While mispairing of nucleotides triggers MMR, NER is recruited by the subtle 6-methyladenine mark on the plasmid substrate, leading to coincident correction of mismatches. The methylation marks on the plasmid were acquired from the bacterial host’s native restriction-modification system during plasmid propagation. </p><p>Formation of hetDNA occurs when a plasmid substrate engages the chromosomal template for repair, forming a D-loop intermediate. D-loop extension requires DNA synthesis by DNA polymerase/s. Translesion synthesis (TLS) polymerases have been implicated in HR in both chicken DT40 cells and fruit fly, but not in yeast. This class of polymerases is known for its low fidelity due to a lack of exonuclease domain and is commonly used for lesion bypass and in extending ends with mismatches. We reported for the first time a requirement of Polζ-Rev1 and Polη (TLS polymerases in S. cerevisiae) for completing gap repair. Moreover, gap-repair efficiency suggested that these two polymerases function independently. We concluded that TLS polymerases are involved in either extending the invading 3’ end and/or in the gap-filling process that completes recombination. </p><p>DNA resection of a DSB serves as a primary step to generate a 3’ single-stranded DNA (ssDNA) for subsequent homologous template invasion, but this process has mostly been studied in the absence of a repair template or when downstream HR steps are disabled. To analyze the individual contributions of identified nucleases to DSB resection in the context of repair, we established a chromosomal assay; the substrate size was increased to 4 kilobases (kb) and 85 SNPs were present at ~50 bp intervals. In this chromosomal assay, resection and DNA synthesis influence the length of hetDNA tracts in the final recombinants, allowing these two steps to be analyzed. We specifically focused on synthesis-dependent strand annealing (SDSA) events, where hetDNA reflects DNA synthesis and extent of resection. Our main conclusions are as follows. DNA end resection on the annealing end of NCO products generated by SDSA is not as extensive as one might expect from resection measured in single-strand annealing (SSA) assays. In addition, although the two long-range resection pathways (Sgs1-Dna2 and Exo1) can support recombination in a redundant manner, hetDNA was significantly reduced upon loss of either. End processing of DSBs is predominantly 5’ to 3’, but we also observed loss of sequences (greater than 8 nt but less than 40 nt) at the 3’ termini. We have tested and ruled out the involvement of Mre11 and Polε proofreading activity. Lastly, Pol32 functions as a subunit of Polδ to promote extensive repair synthesis during SDSA. hetDNA tract lengths were significantly shorter in the absence of the Pol32 subunit of Polδ, providing direct evidence that Polδ extends the invading end during HR. Together, this work advances our understanding of how resection nucleases and DNA polymerase/s function to regulate mitotic recombination outcome and influence the molecular patterns of NCOs.</p> / Dissertation

The cyclical interaction between the force-generating protein myosin and actin is the mechanism responsible for muscle contraction among all muscle types. Cardiac muscle contraction is tightly controlled to ensure that blood pumps effectively and efficiently from the heart to peripheral organs. Mutations in various cardiac proteins can lead to cardiac dysfunction and a number of cardiomyopathies. The first part of this dissertation studies two disease-linked mutations in the regulatory light chain of the cardiac myosin molecule, D166V and K104E, and assesses the kinetic and mechanochemical effects of the mutations via the in vitro motility assay. The data show that D166V mutant myosin force generation is reduced compared to wild type, and exogenous phosphorylation of the mutant light chain rescues force generation. In contrast, the K104E mutation showed no deficit in force production but exhibited increased calcium sensitivity of activation. These results are consistent with contractile defects associated with cardiomyopathies caused by various mutation-induced changes to protein function and mechanism of interaction. The second part uncovers the actin-binding mechanism of one of the chief muscle regulatory proteins tropomyosin. In cardiac and skeletal muscle, tropomyosin and troponin modulate muscle contraction. Tropomyosin binds along the length of actin filaments and blocks myosin-binding sites. Following an excitatory stimulus, calcium binds troponin and causes tropomyosin to shift its position on actin, allowing myosin to bind. The precise mechanism of how tropomyosin monomers with low actin affinity bind to form a stably bound, high affinity chain is unknown. By directly observing fluorescently labeled tropomyosin binding to actin filaments, it was shown that tropomyosin molecules bind randomly along the actin filament. Subsequent monomer binding, and formation of tropomyosin end-to-end bonds, increases the probability of sustained chain growth by decreasing the probability of detachment prior to additional monomer binding. Tropomyosin molecules added to the growing chain at approximately 100 monomers/(μM*s). Different tropomyosin isoforms segregate to distinct functional and structural regions of cells. The last chapter presents data that show spatial segregation of two different tropomyosin isoforms on actin filaments. This suggests that tropomyosin sorting in cells is, at least partly, an intrinsic property of the binding mechanism.

abstract: Studying charge transport through single molecules tethered between two metal electrodes is of fundamental importance in molecular electronics. Over the years, a variety of methods have been developed in attempts of performing such measurements. However, the limitation of these techniques is still one of the factors that prohibit one from gaining a thorough understanding of single molecule junctions. Firstly, the time resolution of experiments is typically limited to milli to microseconds, while molecular dynamics simulations are carried out on the time scale of pico to nanoseconds. A huge gap therefore persists between the theory and the experiments. This thesis demonstrates a nanosecond scale measurement of the gold atomic contact breakdown process. A combined setup of DC and AC circuits is employed, where the AC circuit reveals interesting observations in nanosecond scale not previously seen using conventional DC circuits. The breakdown time of gold atomic contacts is determined to be faster than 0.1 ns and subtle atomic events are observed within nanoseconds. Furthermore, a new method based on the scanning tunneling microscope break junction (STM-BJ) technique is developed to rapidly record thousands of I-V curves from repeatedly formed single molecule junctions. 2-dimensional I-V and conductance-voltage (G-V) histograms constructed using the acquired data allow for more meaningful statistical analysis to single molecule I-V characteristics. The bias voltage adds an additional dimension to the conventional single molecule conductance measurement. This method also allows one to perform transition voltage spectra (TVS) for individual junctions and to study the correlation between the conductance and the tunneling barrier height. The variation of measured conductance values is found to be primarily determined by the poorly defined contact geometry between the molecule and metal electrodes, rather than the tunnel barrier height. In addition, the rapid I-V technique is also found useful in studying thermoelectric effect in single molecule junctions. When applying a temperature gradient between the STM tip and substrate in air, the offset current at zero bias in the I-V characteristics is a measure of thermoelectric current. The rapid I-V technique allows for statistical analysis of such offset current at different temperature gradients and thus the Seebeck coefficient of single molecule junctions is measured. Combining with single molecule TVS, the Seebeck coefficient is also found to be a measure of tunnel barrier height. / Dissertation/Thesis / Ph.D. Electrical Engineering 2012

Cette thèse décrit dans un premier temps la synthèse entièrement régiosélective de phtalocyanines tétra-(endo-alcoxy)-fonctionnalisées puis la formation de leurs complexes avec des ions métalliques. Dans un second temps sont étudiées leurs propriétés magnétiques, l'induction de mésophases colonnaires dans des gammes de températures convenables et avec des tailles modérées de substituants, ainsi que leur utilisation dans des diodes organiques. L'approche synthétique à suivre est la cyclo-tétramérisation de 3-(2-alkylalcoxy)-phtalonitriles suivie de la coordination d'un ion métallique. La symétrisation des chaînes aliphatiques dans le précurseur 3-alcoxy-phtalonitrile, en allant de 2 butyloctyl à 2-pentylheptyl, maintient la régiosélectivité et le mésomorphisme, tandis que les courtes chaînes 2-butylhexyl mènent à la formation d'un mélange de phtalocyanines régioisomères et à une plus grande tentance à la crystallisation. La combinaison de températures de clarification raisonnables avec un empilement colonnaire à température ambiante et avec une proportion assez importante de centres conjurés au sein de la masse moléculaire rend les deux premières séries de matériaux, c'est-à-dire MPc(OCH2CHBuHex)4, and MPc(OCH2CHPent2)4, potentiellement utiles comme transporteurs de charges uniformément orientables dans des dispositifs électroniques organiques. Nous démontrons que ces matériaux phtalocyanines tétra-α-alcoxy-substitués, représentés par H2Pc(OCH2CHBuHex)4, NiPc(OCH2CHBuHex)4 et CuPc(OCH2CHBuHex)4, mènent à des performances originales des dispositifs quand ils sont utilisés comme couche active organique dans des structures simples de diode ITO/PEDOT :PSS/PC/Al. Un redressement prononcé du courant est obtenu dans des diodes malgré l’alignement planaire prépondérant des colonnes dans les couches. Le ligand Pc tétra-α-alcoxy-substitué très soluble donne des molécules-aimants mononucléaires originales par coordination avec MnIII et DyIII. Remarquablement, l’isomère de symétrie C4h du complexe sandwich octa-alcoxy se forme sélectivement grâce aux subsistants encombrants sur les deux cycles Pc. / This thesis describes the fully regioselective synthesis of symmetric all-endo tetra-alkoxy-functionalized phthalocyanines and their metal ion complexes accompanied by induction of columnar mesophases in convenient temperature ranges at moderate substituent sizes, as well as their use in organic diodes and the study of their magnetic properties. The synthetic approach to follow is lithium-induced macrocyclization of 3-(2-alkylalkoxy)-phthalonitriles prior to transition meatl ion insertion. Symmetrization of the aliphatic chains in the 3-alkoxy-phthalonitrile precursor from 2-butylocytyl to 2-pentylheptyl maintains both the regioisomeric mixture during the cyclo-tetramerization and to a somewhat greater tendency to crystallization. The combination of attainable clearing temperatures with room temperature columnar stacking and with a relatively high content of conjugated core within the molecular mass makes the first two series of materials, i.e. MPc(OCH2CHBuHex)4, and MPc(OCH2CHPent2)4, potentially useful as uniformly orientable charge transposters in organic electronic devices. We establish that these tetra-α-alkoxy substituted phthalocyanine materials, as exemplified with H2Pc(OCH2CHBuHex)4, NiPc(OCH2CHBuHex)4 and CuPc(OCH2CHBuHex)4, lead to original device performances when applied as an active organic layer in simple ITO/PEDOT:PSS/PC/Al diode structures. A pronounced current rectification of the diodes is obtained despite the preponderantly planar alignment of the columns in the films. The highly soluble tetra-α-alkoxy-substituted Pc ligand, when combined with MnIII and DyIII, gives rise to original mononuclear single molecule magnets. Remarkably, the C4h-symmetric isomer of the octa-alkoxy double decker complex is formed selectively due of presence of the bulky substituents on both Pc rings.