Spelling suggestions: "subject:"skewed fridge"" "subject:"skewed abridge""
1 |
Tranverse Deck Reinforcement for Use in Tide Mill BridgeBajzek, Sasha N. 25 March 2013 (has links)
The objective of the research presented in this thesis was to study and optimize the transverse deck reinforcement for a skewed concrete bridge deck supported by Hybrid Composite Beams (HCB's). An HCB consists of a Glass Fiber Reinforced Polymer outer shell, a concrete arch, and high strength seven wire steel strands running along the bottom to tie the ends of the concrete arch together. The remaining space within the shell is filled with foam. The concrete arch does not need to be cast until the beam is in place, making the HCB very light during shipping. This lowers construction costs and time since more beams can be transported per truck and smaller cranes can be used. HCB's are quite flexible, so AASHTO LRFD's design model for bridge decks, as a one-way slab continuous over rigid supports, might not apply well to the HCB's deck design.
A skewed three HCB girder bridge with a reinforced concrete deck and end diaphragms was built in the laboratory at Virginia Tech. Concentrated loads were applied at locations chosen to maximize the negative and positive moments in the deck in the transverse direction. The tests revealed that the transverse reinforcement was more than adequate under service loads.
An Abaqus model was created to further study the behavior of the bridge and to help create future design recommendations. The model revealed that the HCB bridge was behaving more like a stiffened plate at the middle section of the bridge, indicating that the flexibility of the girders needed to be considered. / Master of Science
|
2 |
Effects of thermal expansion on a skewed semi-integral bridgeBettinger, Christopher L. January 2001 (has links)
No description available.
|
3 |
Evaluation of Hybrid-Composite Beam for Use in Tide Mill BridgeAhsan, Shainur 02 October 2012 (has links)
A test program for the Hybrid-Composite Beam (HCB) was conducted prior to its use for the replacement of a skewed, simply-supported bridge (Tide Mill Bridge). The HCB is an innovative combination of conventional materials and ideas in a structural beam. The beam consists of a concrete arch tied with prestressing strand that is placed within a Fiber-Reinforced Polymer (FRP) box. Behavior in individual HCB's and a three HCB-system was examined to determine the appropriateness of the current design methodology developed by John Hillman and the simplifying assumptions made within it. Such assumptions include strain compatibility and linear-elastic behavior. Three HCB's were tested at the structures laboratory at Virginia Tech. During individual beam tests, the predicted behavior of the FRP box and prestressing strand agreed with experimental results. The tests revealed the arch was susceptible to local bending and behaved far differently from predicted. Overall, the beams were shown to behave linearly. A final test was performed to apply the design live load to the system. Slight non-linear behavior was observed in the beams. Distribution factors for the system were also investigated and compared to AASHTO and Hillman's model. AASHTO factors were conservative for exterior girders but unconservative for interior girders. Hillman's factors were often conservative but were in agreement for the shear in the exterior girder. The current design procedure appeared to predict FRP and strand behavior well, but the behavior of the arch appeared to differ greatly from the other components of the HCB. / Master of Science
|
4 |
Temperature Effects on Skewed Semi-Integral Bridge End DiaphragmsLucas, Joshua S. 01 October 2018 (has links)
No description available.
|
Page generated in 0.0344 seconds