Spelling suggestions: "subject:"slidingmode"" "subject:"gliding""
21 |
Multivariable Sliding Mode Control for Aircraft EnginesSangwian, Sirirat 13 September 2011 (has links)
No description available.
|
22 |
Adaptive Sliding Mode Control for Aircraft EnginesEbel, Kathryn C. 16 December 2011 (has links)
No description available.
|
23 |
Optimal sliding mode control and stabilization of underactuated systemsXu, Rong 06 August 2007 (has links)
No description available.
|
24 |
Sliding Mode Controller Design for ABS SystemMing, Qian 18 April 1997 (has links)
The principle of braking in road vehicles involves the conversion of kinetic energy into heat. This high energy conversion therefore demands an appropriate rate of heat dissipation if a reasonable temperature and performance stability are to be maintained. While the design, construction, and location features severely limit the heat dissipation function of the friction brake, electromagnetic brakes work in a relatively cool condition and avoid problems that friction brakes face by using a totally different working principle and installation location. By using the electromagnetic brake as supplementary retardation equipment, the friction brakes can be used less frequently and therefore practically never reach high temperatures. The brake linings thus have a longer life span, and the potential "brake fade" problem can be avoided. It is apparent that the electromagnetic brake is an essential complement to the safe braking of heavy vehicles. In this thesis, a new mathematical model for electromagnetic brakes is proposed to describe their static characteristics (angular speed versus brake torque). The performance of the new mathematical model is better than the other three models available in the literature in a least-square sense. Compared with old models that treat reluctance as a constant, our model treats reluctance as a function of speed. In this way, the model represents more precisely the aggregate effect of all side effects such as degree of saturation of the iron in the magnet, demagnetizing effects, and air gap. The software program written in Matlab can be used to code different brake characteristics (both static and dynamic) and evaluate their performance in different road scenarios. A controller is designed that achieves wheel-slip control for vehicle motion. The objective of this brake control system is to keep the wheel slip at an ideal value so that the tire can still generate lateral and steering forces as well as shorter stopping distances. In order to control the wheel slip, vehicle system dynamic equations are given in terms of wheel slip. The system shows the nonlinearities and uncertainties. Hence, a nonlinear control strategy based on sliding mode, which is a standard approach to tackle the parametric and modeling uncertainties of a nonlinear system, is chosen for slip control. Due to its robustness properties, the sliding mode controller can solve two major difficulties involved in the design of a braking control algorithm: 1) the vehicle system is highly nonlinear with time-varying parameters and uncertainties; 2) the performance of the system depends strongly on the knowledge of the tire/road surface condition. A nominal vehicle system model is simulated in software and a sliding mode controller is designed to maintain the wheel slip at a given value. The brake control system has desired performance in the simulation. It can be proven from this study that the electromagnetic brake is effective supplementary retardation equipment. The application and control of electromagnetic brakes might be integrated with the design of vehicles and their friction braking systems so that an ideal match of the complementary benefits of both systems might be obtained to increase safety to a maximum while reducing vehicle operating costs to a minimum. / Master of Science
|
25 |
Dynamical Adaptive Backstepping-Sliding Mode Control for servo-pneumatic positioning applications: controller design and experimental evaluationAbd. Rahman, Ramhuzaini 24 February 2016 (has links)
Servo control of pneumatic actuators is difficult due to the high compressibility and non-linear flow of air. Friction as well as uncertainties in the parameters and model character-izing dynamics of the pneumatic systems further contribute to control challenges. These drawbacks cause stick-slip motion, larger tracking error and limit cycles, which degrades the control performances. Selection of a controller that satisfies requirements of the per-forming tasks is thus crucial in servo-pneumatic applications. This thesis focuses on the design and experimental evaluation of a model-based, nonlinear controller known as Dy-namical Adaptive Backstepping-Sliding Mode Control (DAB-SMC). Originally designed for chemical process control and applied only in simulations, the DAB-SMC is adopted in this thesis and applied to the new area of servo-pneumatic control of a single-rod, double acting pneumatic cylinder and antagonistic pneumatic artificial muscles (PAMs). The con-troller is further enhanced by augmenting it with LuGre-based friction observers to com-pensate the adverse frictional effect presents in both actuators. Unlike other research works, the actuators are subject to a varying load that influences control operations in two different modes: motion assisting or resisting. The implementation of DAB-SMC for such servo-pneumatic control application is novel. The mass flow rates of compressed air into and out of the actuators are regulated using one of the following valve configurations: a 5/3-way proportional directional valve, two 3/2-way or four 2/2-way Pulse Width Modu-lation (PWM)-controlled valves. Over the entire range of experiments which involve vari-ous operating conditions, the DAB-SMC is observed to track and regulate the reference input trajectories successfully and in a stable manner. Average root mean square error (RMSE) values of tracking for cylinder and PAMs when the compressed air is regulated using the 5/3-way proportional valve are 1.73mm and 0.10°, respectively. In case of regu-lation, the average steady-state error (SSE) values are 0.71mm and 0.04°, respectively. The DAB-SMC exhibits better control performance than the standard PID and classical SMC by at least 33%. The DAB-SMC also demonstrates robustness for up to 78% in un-certainty of load parameter. When the control valve is replaced by the PWM-controlled valves of 3/2-way and 2/2-way configurations, performance is slightly compromised. / May 2016
|
26 |
CHATTERING REDUCTION AND OPTIMIZATION OF POWER CONVERTERSAl-Hosani, Khalifa Hasan 28 July 2011 (has links)
No description available.
|
27 |
Integrated control and estimation based on sliding mode control applied to electrohydraulic actuatorWang, Shu 28 February 2007
Many problems in tracking control have been identified over the years, such as the availability of systems states, the presence of noise and system uncertainties, and speed of response, just to name a few. This thesis is concerned with developing novel integrated control and estimation algorithms to overcome some of these problems in order to achieve an efficient tracking performance. Since there are some significant advantages associated with Sliding Mode Control (SMC) or Variable Structure Control (VSC), (fast regulation rate and robustness to uncertainties), this research reviews and extends new filtering concepts for state estimation, referred to as the Variable Structure Filter (VSF)and Smooth Variable Structure Filter (SVSF). These are based on the philosophy of Sliding Mode Control.<p>The VSF filter is designed to estimate some of the states of a plant when noise and uncertainties are presented. This is accomplished by refining an estimate of the states in an iterative fashion using two filter gains, one based on a noiseless system with no
uncertainties and the second gain which reflects these uncertainties. The VSF is combined seamlessly with the Sliding Mode Controller to produce an integrated controller called a Sliding Mode Controller and Filter (SMCF). This new controller is shown to be a robust and effective integrated control strategy for linear systems. For nonlinear systems, a novel integrated control strategy called the Smooth Sliding Mode Controller and Filter (SSMCF), fuses the SMC and SVSF in a particular form to address nonlinearities. The gain term in the SVSF is redefined to form a new algorithm called the SVSF with revised gain in order to obtain a better estimation performance. Its performance is compared to that of the Extended Kalman Filter (EKF) when applied to a particular nonlinear plant.<p>The SMCF and SSMCF are applied to the experimental prototype of a precision positioning hydraulic system called an ElectroHydraulic Actuator (EHA) system. The
EHA system is known to display nonlinear characteristics but can approximate linear
behavior under certain operating conditions, making it ideal to test the robustness of the
proposed controllers.<p>The main conclusion drawn in this research was that the SMCF and SSMCF as developed and implemented, do exhibit robust and high performance state estimation and trajectory tracking control given modeling uncertainties and noise. The controllers were applied to a prototype EHA which demonstrated the use of the controllers in a real world application. It was also concluded that the application of the concepts of VSC for the controller can alleviate a challenging mechanical problem caused by a slip-stick characteristic in friction. Another conclusion is that the revised form of the SVSF could obtain robust and fast state estimation for nonlinear systems.<p>The original contributions of the research include: i) proposing the SMCF and SSMCF, ii) applying the Sliding Mode Controller to suppress cross-over oscillations caused by the slip-stick characteristics in friction which often occur in mechanical systems, iii) the first application of the SVSF for state estimation and iv) a comparative study of the SVSF and Extended Kalman Filter (EKF) to the EHA demonstrating the
superiority of the SVSF for state estimation performance under both steady-state and
transient conditions for the application considered.<p>The dissertation is written in a paper format unlike the traditional Ph.D thesis manuscript. The content of the thesis discourse is based on five manuscripts which are appended at the end of the thesis. Fundamental principles and concepts associated with SMC, VSF, SVSF and the fused controllers are introduced. For each paper, the objectives, approaches, typical results, conclusions and major contributions are presented. Major conclusions are summarized and original contributions reiterated.
|
28 |
Integrated control and estimation based on sliding mode control applied to electrohydraulic actuatorWang, Shu 28 February 2007 (has links)
Many problems in tracking control have been identified over the years, such as the availability of systems states, the presence of noise and system uncertainties, and speed of response, just to name a few. This thesis is concerned with developing novel integrated control and estimation algorithms to overcome some of these problems in order to achieve an efficient tracking performance. Since there are some significant advantages associated with Sliding Mode Control (SMC) or Variable Structure Control (VSC), (fast regulation rate and robustness to uncertainties), this research reviews and extends new filtering concepts for state estimation, referred to as the Variable Structure Filter (VSF)and Smooth Variable Structure Filter (SVSF). These are based on the philosophy of Sliding Mode Control.<p>The VSF filter is designed to estimate some of the states of a plant when noise and uncertainties are presented. This is accomplished by refining an estimate of the states in an iterative fashion using two filter gains, one based on a noiseless system with no
uncertainties and the second gain which reflects these uncertainties. The VSF is combined seamlessly with the Sliding Mode Controller to produce an integrated controller called a Sliding Mode Controller and Filter (SMCF). This new controller is shown to be a robust and effective integrated control strategy for linear systems. For nonlinear systems, a novel integrated control strategy called the Smooth Sliding Mode Controller and Filter (SSMCF), fuses the SMC and SVSF in a particular form to address nonlinearities. The gain term in the SVSF is redefined to form a new algorithm called the SVSF with revised gain in order to obtain a better estimation performance. Its performance is compared to that of the Extended Kalman Filter (EKF) when applied to a particular nonlinear plant.<p>The SMCF and SSMCF are applied to the experimental prototype of a precision positioning hydraulic system called an ElectroHydraulic Actuator (EHA) system. The
EHA system is known to display nonlinear characteristics but can approximate linear
behavior under certain operating conditions, making it ideal to test the robustness of the
proposed controllers.<p>The main conclusion drawn in this research was that the SMCF and SSMCF as developed and implemented, do exhibit robust and high performance state estimation and trajectory tracking control given modeling uncertainties and noise. The controllers were applied to a prototype EHA which demonstrated the use of the controllers in a real world application. It was also concluded that the application of the concepts of VSC for the controller can alleviate a challenging mechanical problem caused by a slip-stick characteristic in friction. Another conclusion is that the revised form of the SVSF could obtain robust and fast state estimation for nonlinear systems.<p>The original contributions of the research include: i) proposing the SMCF and SSMCF, ii) applying the Sliding Mode Controller to suppress cross-over oscillations caused by the slip-stick characteristics in friction which often occur in mechanical systems, iii) the first application of the SVSF for state estimation and iv) a comparative study of the SVSF and Extended Kalman Filter (EKF) to the EHA demonstrating the
superiority of the SVSF for state estimation performance under both steady-state and
transient conditions for the application considered.<p>The dissertation is written in a paper format unlike the traditional Ph.D thesis manuscript. The content of the thesis discourse is based on five manuscripts which are appended at the end of the thesis. Fundamental principles and concepts associated with SMC, VSF, SVSF and the fused controllers are introduced. For each paper, the objectives, approaches, typical results, conclusions and major contributions are presented. Major conclusions are summarized and original contributions reiterated.
|
29 |
Commande sans capteur mécanique de la machine asynchrone pour la variation de vitesse industrielle / Sensorless induction machine control for industrial speed variationSolvar, Sébastien 21 December 2012 (has links)
La machine asynchrone présente un intérêt majeur par rapport aux autres types de machines(courant continu, synchrone, ...), sa robustesse, son faible coût de fabrication etd'entretien en sont les principales raisons. Cependant ces avantages ont longtemps été inhibés par la complexité de la commande de celle-ci.De nos jours de nombreux industrielles proposent des variateurs de vitesse pour la machine asynchrone offrant à la fois la souplesse de contrôle, et la qualité de la conversion électromagnétique,naturellement obtenues jusqu'alors avec la machine à courant continu et de la machine synchrone.Depuis quelques années les industrielles font face à une nouvelle problématique, qui est la suppression du capteur mécanique dans le processus de régulation de vitesse de la machine asynchrone. Les travaux de cette thèse, effectués dansle cadre d'un support CIFRE entre l'entreprise GS Maintenance et le laboratoire ECS-Lab EA 3649, ont été orientésvers la réalisation d'un système de contrôle commande d'un variateur industrieldédié aux machines asynchrones sans capteur mécanique. De ce point de vue, l'objectifpremier du travail de thèse, est la conception des techniques de détermination des grandeursmécaniques (vitesse) de la machine asynchrone en utilisant comme seules mesuresles grandeurs électriques. Ces techniques, utilisées pour remplacer l'informationdonnée par les capteurs mécaniques, sont parfois appelées capteurs logiciels.Une attention particulière est donnée au fonctionnement de la machine asynchrone sanscapteur mécanique à basse vitesse. Dans un second temps l'objectif étant d'illustrer lesintérêts technologiques d'un observateur basé sur la technique des modes glissants dansle but d'intégrer celui-ci dans le système contrôle commande d'un variateur industriel. / Induction machine includes main interests compared with others electricals machines like brushed DC Motor,or synchronus electric Motor.Its robustness, its low cost manufacture, and maintenance are major reason of its success.However, for long time this advantages inhibited because of induction machine control complexity.Nowadays,many industrial propose speed drives for induction machine giving both control flexibility, and electromagnetic qualited conversion, naturally obtained with DC motor, and synchronus electric Motor.For several years now, many manufacturers face to a new problematic, wich is sensorless induction machine control.This thesis work, carried out in concert with the firm GS Maintenance and ECS-Lab EA 3649 laboratory under CIFRE financement.This work focused on conception plant dedicated to sensorless industrial speed drive control for induction machine.From this point of view, at first glance this work proposes technical strategies to identify mechanical induction machine variables, by using only electrical measurements.This strategies used to stand in for informations from a mechanical sensor, are the so called software sensor.Specific attention has been paid to induction machine sensorless working at very low speed. Secondly, we propose to illustrate the interest of a second order Sliding Mode Observer with final aim to be integrated into an industrial speed drive
|
30 |
Controle com modos deslizantes aplicado em sistemas com atraso e acesso somente à saída /Damazo, Graciliano Antonio. January 2008 (has links)
Orientador: José Paulo Fernandes Garcia / Banca: Laurence Duarte Colvara / Banca: Ivan Nunes da Silva / Resumo: O enfoque principal do trabalho foi dado ao Controle Discreto com Modos Deslizantes(CDMD) aplicado em sistemas que possuem atraso no processamento do sinal de controle e acesso somente à saída do sistema. A estratégia de controle tem por objetivo a utilização de técnicas de controle com modos deslizantes para a elaboração de uma lei de controle simples e robusta às incertezas da planta e ao atraso. O observador de estados apresentado possui características de modo deslizante, o qual realiza a estimação robusta do vetor de estados que na maioria dos casos práticos não é totalmente acessível. Os métodos de projetos propostos podem ser aplicados no controle de plantas estáveis ou instáveis com atraso no sinal de controle e acesso somente à saída da planta. Para comprovar a eficiência dos projetos apresentados neste trabalho, analisou-se o controlador atuando com acesso a todos estados e o controlador atuando juntamente com o observador robusto para a estimação dos estados. Os resultados foram obtidos através de simulações no Sistema Bola e Viga, Sistema Pêndulo Invertido Linear e Sistema Pêndulo Invertido Rotacional que são exemplos de plantas de natureza instável. / Abstract: The main focus was placed on the Discrete Sliding Mode Control (DSMC) applied to systems that have a delay in the processing of the control signal and access to the system output only. The control strategy is intended to use control techniques of sliding modes to elaborate a simple and robust control law against the uncertainties of the plant and the delay. The states observer presented has the characteristics of a sliding mode, which performs the robust estimation of the states vector that, in most practical cases, is not fully accessible. The design methods proposed may be applied to the control of stable or unstable plants with delay on the control signal and access to the plant output only. In order to attest the efficiency of the design presented in this work, the controller was analyzed at work with access to all states and jointly with the robust observer to estimate the states. The results were obtained by means of simulations in the Ball and Beam System, Linear Inverted Pendulum System, and Rotational Inverted Pendulum System, which are examples of plants of unstable nature. / Mestre
|
Page generated in 0.0623 seconds