An ever-increasing demand for wider bandwidths in communication, radar, and imaging systems has emerged. In order to facilitate this growing demand, progressive research into millimeter-wave technologies has become vital in achieving next generation networks such as 5G. Being cost effective and easy to manufacture, Substrate Integrated Waveguide (SIW) circuits have been demonstrated as a viable candidate for high-frequency applications due to their low-loss, high quality-factor, and high power-handling capabilities.Research on beam-forming networks, specifically the Butler matrix, has demonstrated powerful beam-steering capabilities through the use of passive component networks. Through these clever configurations, a cost effective and robust option is available for us to use. In order to further millimeter-wave research in this area, this thesis presents a modified configuration of the Butler Matrix in SIW that is physically reconfigurable; by separating the Butler matrix from the antenna array at a pre-selected point, the array can be easily interchanged with other 1-Dimensional,and 2-Dimensional slot antenna arrays. Although this system does not fall under the rigorous definitions of Reconfigurable Antennas, it should be noted that the interchangeability of 1 and 2 dimensional arrays is not typically expressed in Butler matrix configurations. Design and simulations are carried out in CST Microwave Studio to inspect individual components as well as system characteristics. Circuit prototypes are then manufactured and tested in an anechoic chamber to validate simulation results and the design approach. / Graduate / 2020-07-17

This diploma thesis is focused on design of various antenna structures, based on slot antennas, created in the wider wall of a rectangular-shaped waveguide. As the substrate, it is used a 3D textile material, while its properties are examined. They were designed structures, that operate with linear and circular polarization, and other related structures, that are used for feeding and power division. Structures are designed to operate at central frequency of 8 GHz and its vicinity.

This master's thesis deals with the basic principles of slot antennas. Models of antennas were simulated in a selected electromagnetic simulator CST MICROWAVE STUDIO (CST MWS). There are several models of slot antennas which are optimized for communication in the car at a frequency 8 GHz.