This thesis focuses on one important component of the energy system - the window. Windows are installed in buildings mainly to create visual contact with the surroundings and to let in daylight, and should also be heat and sound insulating. This thesis covers four important aspects of windows: antireflection and switchable coatings, energy simulations and optical measurements. Energy simulations have been used to compare different windows and also to estimate the performance of smart or switchable windows, whose transmittance can be regulated. The results from this thesis show the potential of the emerging technology of smart windows, not only from a daylight and an energy perspective, but also for comfort and well-being. The importance of a well functioning control system for such windows, is pointed out. To fulfill all requirements of modern windows, they often have two or more panes. Each glass surface leads to reflection of light and therefore less daylight is transmitted. It is therefore of interest to find ways to increase the transmittance. In this thesis antireflection coatings, similar to those found on eye-glasses and LCD screens, have been investigated. For large area applications such as windows, it is necessary to use techniques which can easily be adapted to large scale manufacturing at low cost. Such a technique is dip-coating in a sol-gel of porous silica. Antireflection coatings have been deposited on glass and plastic materials to study both visual and energy performance and it has been shown that antireflection coatings increase the transmittance of windows without negatively affecting the thermal insulation and the energy efficiency. Optical measurements are important for quantifying product properties for comparisons and evaluations. It is important that new measurement routines are simple and applicable to standard commercial instruments. Different systematic error sources for optical measurements of patterned light diffusing samples using spectrophotometers with integrating spheres have been investigated and some suggestions are made for how to avoid such errors.

No description available.

L’oxyde de zinc dopé de type n est un excellent candidat pour la réalisation de films transparents et isolants thermiques grâce à ses propriétés d’absorption et de réflexion limitées aux domaines UV et IR. La synthèse en milieu polyol de particules nanostructurées d’oxyde de zinc dopé par du gallium a été utilisée afin de maîtriser la morphologie des cristallites. Il a été démontré expérimentalement et théoriquement que le maximum d’efficacité d’absorption IR est atteint pour un taux de dopant de 2,6 % molaire. Des suspensions de haute transmission dans le visible et absorption infrarouge significative ont été obtenues par l’encapsulation des particules avec un matériau fluoré d’indice de réfraction intermédiaire entre l’oxyde et le milieu dispersant, ainsi que par l’optimisation de l’état de dispersion de suspensions colloïdales grâce à l’adsorption de thioalcanes en surface des cristallites de ZnO dopés. / Thanks to its absorption / reflexion properties limited to the UV and the IR range, n-doped zinc oxide is a promising candidate for the elaboration of transparent and insulating films in smart windows. Nanostructured particles of Ga-doped zinc oxide were elaborated by polyol process. Polyol process was used in order to control the size and the morphology of the particles. Both experimental and theoretical data show that a maximum of IR absorption efficiency is obtained for a doping rate of 2.6 molar percent. Colloidal suspensions with high transmission in the visible range combined with significant absorption of the near infrared range were obtained using two strategies. The first one is the encapsulation of the Ga-doped ZnO particles by a fluoride shells with an intermediate refractive index between ZnO and the dispersion medium. The second one is the optimization of the dispersion state of nano-colloidal suspensions thanks to the adsorption of thioalkanes on the Ga-doped ZnO crystallite surfaces.

Electrochromic devices (ECDs) have emerged as a unique class of optoelectronic devices for the development of smart windows. However, current ECDs typically suffer from low coloration efficiency (CE) and high energy consumption, which have thus hindered their practical applications, especially as components in solar-powered EC windows. Here, the high-performance ECDs with a fully crystalline viologen-immobilized 2D polymer (V2DP) thin film as the color-switching layer is demonstrated. The high density of vertically oriented pore channels (pore size ≈ 4.5 nm; pore density ≈ 5.8 × 1016 m-2) in the synthetic V2DP film enables high utilization of redox-active viologen moieties and benefits for Li+ ion diffusion/transport. As a result, the as-fabricated ECDs achieve a rapid switching speed (coloration, 2.8 s; bleaching, 1.2 s), and a high CE (989 cm2 C-1), and low energy consumption (21.1 µW cm-2). Moreover, it is managed to fabricate transmission-tunable, self-sustainable EC window prototypes by vertically integrating the V2DP ECDs with transparent solar cells. This work sheds light on designing electroactive 2D polymers with molecular precision for optoelectronics and paves a practical route toward developing self-powered EC windows to offset the electricity consumption of buildings.

<p dir="ltr">Smart windows, dynamically adjusting optical transmittance, face global adoption challenges due to climatic and economic variability. Aiming these issues, we synthesized a methyl cellulose (MC) salt system with high tunability for intrinsic optical transmittance (89.3%), which can be applied globally to various locations. Specifically, the MC window has superior heat shielding potential below transition temperatures while turning opaque at temperatures above the Lower Critical Solution Temperature (LCST), reducing the solar heat gain by 55%. Such optical tunability is attributable to the particle size change triggered by the temperature-induced reversible coil-to-globular transition. This leads to effective refractive index and scattering modulation, making them prospective solutions for light management systems, an application ahead of intelligent fenestration systems. MC-based windows demonstrated a 9°C temperature decrease compared to double-pane windows on sunny days and a 5°C increase during winters in field tests, while simulations predict an 11% energy savings.</p><p dir="ltr">Incorporating MC-based phase change materials in passive solar panels indicated optimized energy efficiency, offering a sustainable alternative. Real-time simulations validate practical applicability in large-scale solar panels. Furthermore, a temperature-responsive sorbent with a dark layer demonstrates an optimal optical and water uptake performance. Transitioning between radiative cooling and solar heating, the sorbent exhibits high water harvesting efficiency in lab and field tests. With an adjustable LCST at 38 ℃, the cellulose-based sorbent presents a potential solution for atmospheric water harvesting, combining optical switching and temperature responsiveness for sustainable water access. Furthermore, the ubiquitous availability of materials, low cost, and ease-of-manufacturing will provide technological equity and foster our ambition towards net-zero buildings and sustainable future.</p>