No description available.

Energy piles are deep foundation elements designed to utilize near-surface geothermal energy, while at the same time serve as foundations for buildings. The use of energy piles for geothermal heat exchange has been steadily increasing during the last decade, yet there are still pending questions on their thermo-mechanical behavior. The change in temperature along energy piles, resulting from their employment in heat exchange operations, causes axial displacements, thermally induced axial stresses and changes in mobilized shaft resistance which may have possible effects on their behavior. In order to investigate these effects, an extensive field test program, including conventional pile load tests and application of heating-cooling cycles was conducted on three energy piles during a period of six weeks. Temperature changes were applied to the test piles with and without maintained mechanical loads to investigate the effects of structural loads on energy piles. Moreover, the lengths of the test piles were determined to represent different end-restraining conditions at the toe. Various sensors were installed to monitor the strain and temperature changes along the test piles. Axial stress and shaft resistance profiles inferred from the field test data along with the driven conclusions are presented herein for all three test piles. It is inferred from the field test results that changes in temperature results in thermally induced compressive or tensile axial stresses along energy piles, the magnitude of which increases with higher restrictions such as structural load on top or higher toe resistance. Moreover, lower change in shaft resistance is observed with increasing restrictions along the energy piles. In addition to the design, deployment, and execution of the field test, a thermo-mechanical cyclic numerical model was developed as a part of this research. In this numerical model, load-transfer approach was coupled with the Masing's Rule in order to simulate the two-way cyclic axial displacement of energy piles during temperature changes. The numerical model was validated using the field test results for cyclic thermal load and thermo-mechanical load applications. It is concluded that the use of load-transfer approach coupled with the Masing's Rule is capable of simulating the cyclic thermo-mechanical behavior of energy piles. / Ph. D. / Global energy demands are increasing rapidly, along with depleting natural resources. Of equal importance, the consumption of fossil fuels pose a great threat to the environment. Hence, there is an urgent need to find alternative energy resources, such as near surface geothermal energy. Energy piles are one of the ways of exploiting near surface geothermal energy. In this system, the piles that are already required for structural support are equipped with geothermal loops, for heat exchange operations. With the use of energy piles, the heat energy can be extracted from the ground to heat the buildings during winter. Similarly, the heat energy can be withdrawn into the ground, in order to cool the buildings during summer. Energy piles provide an environmental friendly way of heating and cooling of the buildings. However, there are several effects of the heat exchange operations on the behavior of energy piles. During winter, because of heat extraction, the temperature of the energy pile decreases, which causes the tendency of contraction of the pile. On the other hand, during summer, the heat injection into the ground increases the temperature of the energy piles, which results in a tendency of elongation of the energy pile. Depending on the level of restriction from the surrounding soil or the building on top, some of the expansion or contraction tendency of the energy piles actually take place, which results in axial displacements and changes in shaft resistance. The restricted part of the contraction or expansion causes axial stresses along the piles. The primary role of the piles, which is structural support, should not be jeopardized by these effects of heat exchange operations. In this doctoral research, the effects of temperature change on the behavior of energy piles are investigated. For the experimental investigation, a full-scale field test on three energy piles was performed, where temperature changes were applied to the test piles, to evaluate their effects. In addition, a numerical model was developed, and it is validated by using the field test results. This numerical model can be used for different soil profiles, pile characteristics and temperature changes, in order to estimate the behavior of various scenarios of energy piles during their design.

Le travail de thèse présenté dans ce mémoire vise à analyser et à comprendre les mécanismes mis en jeu au niveau de l’impact du creusement d’un tunnel par bouclier à front pressurisé sur des fondations profondes avoisinantes. Cette thèse a été réalisée dans le cadre du projet européen NeTTUN, au sein du Laboratoire de Tribologie et de Dynamique des Systèmes (LTDS) de l’ENTPE. L’approche phénoménologique conduite lors de ces travaux repose sur deux importantes campagnes expérimentales réalisées à l’aide d’un dispositif unique au plan international de modèle réduit 1g de tunnelier à pression de terre (échelle de l’ordre de 1/10eme). La forte originalité de ce dispositif est de pouvoir simuler de façon réaliste les principales étapes du processus tridimensionnel d’excavation mécanisé d’un tunnel. Dans le cadre de cette thèse, le dispositif existant de modèle réduit de tunnelier a dans un premier temps été reconfiguré afin de pouvoir répondre aux besoins du programme expérimental envisagé. Des modèles physiques de fondations profondes (pieux et groupes de pieux) et de barrières de protection ont été conçus dans le cadre des lois de similitude, fabriqués et instrumentés. Deux campagnes expérimentales d’envergure ont été réalisées en massif de sable sec : l’une concerne les effets du passage d’un tunnelier à front pressurisé sur des fondations profondes avoisinantes (pieux, groupe de pieux), l’autre traite de l’efficacité de barrières de protection (parois moulées) utilisées pour limiter ces effets. Différents paramètres qui influencent l’interaction tunnelier - sol - fondations ont été considérés comme la distance relative tunnel / fondation, la pression frontale de soutènement appliquée par le TBM sur le terrain ou encore la hauteur des barrières de protection. L’analyse phénoménologique menée à l’échelle du modèle concerne en particulier l’évolution des champs de contraintes et de déplacements dans le terrain autour du tunnelier, les déplacements relatifs sol - pieu et sol- barrière, la redistribution des efforts au sein des fondations. L’importante base de données et d’analyse ainsi constituée a été mise à profit pour la validation d’outils de modélisation numérique développés par l’Université de Rome au sein du projet NeTTUN. / The major goal presented in this thesis was to analyze and investigate the mechanisms, which are involved in the impact of the tunnels excavated thanks to an Earth Pressure Balanced Shield on nearby deep foundations. This thesis was realized in European project NeTTUN and the work had been done in the Laboratory of Tribology and Systems Dynamics (LTDS) of ENTPE. During these works, phenomenological approach was based on two important experimental campaigns carried out using a unique device at the international level of a 1g scale model of earth-pressure tunnel boring machine (scale of the order of 1 / 10). The state of the art of this device was to be able to simulate in possibly realistic way the main stages of the three-dimensional process of mechanized excavation of a tunnel. In the framework of this thesis, the existing model tunneling machine device was initially reconfigured in order to reach the expectations of the experimental program envisaged. Physical models of deep foundations (piles and groups of piles) and protective barriers were designed under the similitude laws, manufactured and instrumented. The two large-scale experimental campaigns have been carried out in a dry sand massif. The first one concerned the effects of the passage of a pressurized tunnel boring machine on nearby deep foundations (piles, group of piles), whereas another one dealed with the effectiveness of mitigation procedure (diaphragm walls) used to limit these effects. Different parameters that influenced on the tunneling: soil - foundation interaction considered as the relative tunnel / foundation distance, the frontal face pressure applied by the TBM in the field or the height of the protective barriers. The phenomenological analysis carried out at the scale of the model concerned in particular the evolution of the fields of stresses and displacements in the ground around the tunnel boring machine, relatives pile / soil and wall / soil displacements and the redistribution of stresses along the pile foundations. The large database and analysis constituted was used for the validation of numerical modeling tools developed by the University of Rome within the NeTTUN project.