The primary objective of this study was to investigate the use of water table management (WTM) as a microbial delivery system for in-situ bioaugmentation of contaminated soils. In addition, the use of Rhizobium ( R.) for PCB degradation in soils was evaluated. / First, the presence and isolation of a variety of strains of Rhizobium meliloti was demonstrated using plant nodulation tests on alfalfa plants in soils that were contaminated for over 15 years with PCBs, PAHs and heavy metals. Next, R. meliloti, strain A-025, was selected based on its membrane (hydrophobicity, adhesion) characteristics and its potential to transform PCBs. This strain was delivered and implanted in sod columns, 200 mm in diameter x 1000 mm in length, packed with a sandy loam soil, using surface and subirrigation. The results of this study showed that subirrigation led to a higher number and a more uniform distribution of the bacterial cells in the soil at 60, 300, 500, and 700 mm depths, than surface irrigation. / In a different setup, similar column were packed with a PCB contaminated soil. These soil columns were bioaugmented with three bacterial cultures, i.e., R. meliloti (strain A-025), Comomonas testosteroni (strain B-356) and an indigenous bacterial consortium using subirrigation. The results indicated that bioaugmentation of the PCB contaminated soil was possible by using subirrigation. Bioaugmentation with the indigenous culture was observed to be more effective in the biodegradation of PCBs than with A-025 and B-356 cultures at 140 and 340 mm depths. However, at 590 mm depth, bioaugmentation with strain A-025 was observed to be better than the other treatments. Sequential aerobic and anaerobic cycles appear to be of significance for effective dechlorination of PCB congeners to lower chlorinated congeners. / In a separate exploratory study, the rhizospheric effects of alfalfa plants on R. meliloti for PCB depletion were investigated. The results suggest that the growth of alfalfa plants and bioaugmentation of soil with R. meliloti, strain A-025, increased the depletion of PCB congeners in the soil as compared to bioaugmentation alone. In other preliminary studies, the results showed that the presence of PCBs in a sandy loam soil increases the filtration of bacterial cells. Also, soil type and the presence of PCBs affected water infiltration, moisture, and hardness of the soil. Furthermore, water table management system along with bioaugmentation of soil columns with R. meliloti, strain A-025, decreased the concentration of atrazine by 31% during anaerobic and aerobic cycles and reduced the concentration of nitrate by 87% and 78% in the absence and presence of atrazine, respectively, in the drainage water. / The overall results of this work indicate that water table management (subirrigation) can be used for bioaugmentation of contaminated soils. Also, use of R. meliloti may prove to be an interesting option for soils contaminated with PCBs, atrazine and nitrate.

A possible remediation strategy that involved washing with complexing reagents(s) [disodium ethylenediaminetetraacetate (Na2EDTA) alone or in combination with bis-(2-hydroxyethyl)dithiocarbamate (HEDC)] was evaluated with an urban soil that had been field contaminated with excesses of heavy metal (HMs). Heavy metals (Cd, Cu, Mn, Ni, Pb and Zn) were targeted for removal. The aqueous solution that resulted from, washing was treated with zero-valent (ZV) magnesium (Mg0) or bimetallic mixture (Pd0/Mg 0 or Ag0/Mg0) to release the chelating reagent(s) from their heavy metal complexes. During this reaction, the heavy metals were precipitated from solution as hydroxides or became plated on to the surface of the excess ZV reagent. Thus, an appreciable fraction of the mobilized Pb and Cu and a portion of Zn became cemented to the surface of the ZV metal whereas most of the Fe and Mn were removed from solution as insoluble hydroxides. After filtration and pH re-adjustment, the demetallized solution was then returned to the soil to extract more heavy metals. After three washing cycles with the same reagent, it was observed that the sparing quantity of EDTA (10 mmoles) had mobilized 32--54% of the soil burden heavy metals (5 mmoles), but only 0.1% of the iron had been removed. / A 1:1 (mol/mol) mixture of EDTA and HEDC proved to be approximately equally efficient at HM extraction despite more than a three-fold reduction (3 mmoles) in the quantity of reagents. Three washing with the same reagent mobilized some 49% of the Pb, 18% of the Zn and 19% of the Mn but only 7% of the Cu and 1% of the Fe from the test soil.

No description available.

No description available.

The Microwave-Assisted Process (MAP$ sp{ rm TM}$) is an enhanced extraction technology patented by Environment Canada. MAP uses microwaves to rapidly transfer target compounds from one phase to another by selectively heating the phase containing the target compounds. This thesis presents the results of research performed to determine whether the MAP technique can be further developed into a large-scale soil treatment process that overcomes the limitations of conventional remediation technologies. / The dielectric properties of several mixtures of acetone and hexane over a temperature range from 25$ sp circ$C to 50$ sp circ$C were measured. The dielectric constants of these mixtures were found not to vary significantly with temperature. / A study of microwave absorption by heterogeneous mixtures showed that adding a solid material to a low dielectric constant solvent resulted in energy being preferentially absorbed by the solid. / The results of laboratory extraction tests showed that the ability of the MAP technique to extract contaminants was affected by the organic matter content of soil, particularly in the presence of water. / Use of a closed-vessel system yielded a 60% to 175% increase in the extraction of PAHs from a low organic-content soil relative to that achieved in an open-vessel system. (Abstract shortened by UMI.)

Chemical treatment of contaminated soils (in-situ or ex-situ) is the current most practical option for remediation. The degree of metal complexation by organic acids depends on the type, concentration, metal type, pH and temperature. The influence of pH, temperature on the extraction efficiency of lead, zinc and copper was evaluated using Sodium citrate and sodium acetate buffers. Sodium citrate buffer was selected for the soil treatment. The soil was characterized for its pH, total metal content and the distribution of target heavy metals in soil fractions. Optimal conditions for Pb extraction with 0.5M citrate buffer was used to treat soil in batches and in columns, to evaluate their extraction efficiency and possible use for in-situ remediation. / Chitosan, a derivative of chitin is a versatile biopolymer with metal uptake capabilities. Due to the large amounts of chitosan required to treat heavily contaminated leachates, magnesium (Mg) and iron (Fe) metals granules were evaluated for stripping the heavy metals from solution before the use of chitosan at optimized conditions to effectively polish the soil washing. (Abstract shortened by UMI.)

Phytoremediation, i.e., the use of plants to clean up contaminated soil, may serve as a feasible alternative if a high-biomass crop can be found that accumulates metals to a high.degree. Two plant species, corn (Zea mays) and Indian mustard (Brassica juncea), were grown in soil from a Superfund site contaminated with Pb and Cd (PbTota, = 65,200 mg/kg and CdTotI = 52 mglkg) over two croppings. Soil treatments consisted of composted sewage sludge (CSS), ethylenediaminetetraacetic acid (EDTA), and sodium citrate at two concentrations. In most cases, the EDTA and citrate treatments were superior in terms of extracting soil Pb into root tissue, and translocation of Pb into aboveground biomass. The CSS treatment typically resulted in the lowest Pb removal efficiencies. The high pH (7.4) and high exchange capacity of the CSS may have immobilized soil Pb. Soil Cd was generally more mobile than soil Pb. The EDTA2 treatment was most effective in removing soil Pb into roots, and translocation to shoots. Lead remaining in the soil after two croppings was mainly associated with the carbonate, organic, and residual fractions, which represent the less bioavailable form of this metal. / Department of Natural Resources and Environmental Management

Plant-based remediation techniques that can address mixtures of heavy metals and organic contaminants in soil warrant investigation due to their cost effectiveness and public acceptability. The potential of phytoremediation to remediate mixtures of heavy metals and hydrocarbons in soil is presented in two papers. A hydropic screening of twenty-seven forage grasses, grown in a solution containing 100 muM Zn, 5 muM Cu and 1 muM Cd, provided six species that were exceptionally metal tolerant. These six species were examined for their growth response and root phenolic secretion at five levels of hydroponic heavy metal contamination. Phenolic secretion, an indicator of a plant's capacity to promote polycyclic aromatic hydrocarbon (PAH) degradation, increased with heavy metal contamination, however, the values were low (<30 mug/g root). Two high biomass producing, metal-tolerant grasses, Bromus riparius and Arrhenatherum elatius, were combined with M2Rhizo4, a strain of plant growth-promoting rhizobacteria. The plant-bacterial combinations were established in artificial and genuine soils contaminated with heavy metals and PAHs at a range of concentrations. In contaminant-free artificial soil, inoculation promoted B. riparius growth by 25% compared to non-inoculated plants. In artificial soil, contaminated with 495 mg/kg Zn, 263 mg/kg Cu and 23 mg/kg Cd, M2Rhizo4 promoted B. riparius growth by 22%. In chromated-copper-arsenate (CCA) and creosote contaminated soil, M2Rhizo4 inoculated A. elatius had 15% more biomass and greater survival rates than non-inoculated A. elatius. A phytoremediation system composed of metal-tolerant plants inoculated with hydrocarbon-degrading or plant growth promoting bacteria may be suitable for sites contaminated with a mixtures of hydrocarbons and heavy metals.

Heavy metals in the environment are a source of some concern because of their potential reactivity, toxicity, and mobility in the soil. Soil contamination by metals is placing human and environmental health at risk through possible contamination of food chain. / Soil washing can be used to remove metals from the soil. Chemical treatment involves the addition of extraction agents that react with the contaminant and leach it from the soil. The liquid, containing the contaminants, is separated from the soil resulting in a clean solid phase. Six chelating reagents, EDTA, Citric acid, ADA, DTPA, SCMC, and DPTA, were employed to determine the relative extraction efficiencies of the six chelating reagents for the target metals. Recycling of chelating reagent was the main interest of this study. The experiments were divided into four parts: (1) preliminary studies on the preparation and characterization of soil that included grinding, sieving, soil texture measurements, total metals content post digestion and the distribution of metals in different soil fractions as well as (2) a comparison of the extraction efficiencies of six chelating reagents toward Cu, Pb, Zn, Fe, and Mn. Additionally, the chelating reagent was liberated and recycled by treatment of the metal-complexes with disodium diethyl dithiocarbomate (DEDTC). Additionally, supercritical CO2 was used to extract metal-DEDTC complexes using various surfactants to maintain the metal-DEDTC complexes in suspension. Finally, (4) magnesium metal was evaluated as an alternative method for liberating the water-soluble chelating reagent from the complex so as to be able to recycle this reagent as well. / The different approaches were promising in terms of recycling the chelating reagents that suggests a means of optimizing the experimental conditions in future applications.

Polychlorinated biphenyls (PCBs) are toxic, stable organic contaminants that are present in air, water, soil, plants and animals all around the world. The market for PCB treatment technologies is estimated to be $300 to $600 million (Canadian dollars) for the year 2000, and will expand in future years. Existing treatment technologies to remove PCBs from soil are underutilized because they are more expensive than landfilling and incineration. This thesis presents a laboratory study of an innovative PCB remediation process that will extract PCBs from soil in-situ for subsequent destruction above ground. This remedy will remove PCBs from surficial soil without the need for excavation. Two laboratory studies were conducted on field-contaminated soil. The first experiment evaluated the effectiveness of hexane, methyl isobutyl ketone, and ethyl acetate in removing PCBs from soil. Ethyl acetate and MIBK were equally effective, removing 99% and 98% of PCBs from dry soil in 4 days, respectively. In the second experiment, soil was exposed to ethyl acetate for varying amounts of time, and some of the samples were treated a second time with fresh solvent. PCB removal increased as treatment time was increased from 10 minutes to 50, 250, and 1250 minutes, but the rate of PCB removal decreased as treatment time increased. The second 10-minute extraction removed an additional 1--10% of the remaining PCBs.