No abstract available. / Dissertation (MSc (Soil Science))--University of Pretoria, 2007. / Plant Production and Soil Science / unrestricted

The objectives of this project was to isolate and characterize a Bacillus thuringiensis strain from South African soils, determine its cry gene sequence, clone this gene sequence and determine its toxicity. Forty four putative Bacillus thuringiensis strains were extracted from soil samples taken from the Muldersdrift mountain range, the Roodekrans botanical gardens, Southbroom in Kwazulu Natal and Nelspruit in eastern Mpumalanga province. The bacterial populations of these soil samples were isolated and classified using different microbial, and biochemical techniques including sodium acetate tests to isolate putative B. thuringiensis spores. These spores were cultured and further characterized through colony shape and colour as well as the presence of δ-endotoxin crystals. Once characterized, DNA was extracted from the isolates using an array of techniques to obtain high quality template DNA. This DNA was then screened via PCR using truncated versions of the cry1A specific primers TYIAA (f) and TYIUN12 (r). The insecticidal protein CRY1A was selected for this study since it is specific and highly toxic to lepidopteron insects. Homology to the cry1a gene was detected in six of the Bacillus strains analyzed, namely S4, S9, S10 n1, n3 and n5. PCR products were cloned into the pTZ57R/T cloning vector and transformed into JM109 competent cells. DNA from the six isolates was also characterized at the 16S rDNA level with the use of PCR. Primers capable of amplifying nearly full-length 16S ribosomal DNA (approximately l,500-bp) fragments from many bacterial genera confirmed that the isolates were indeed Bacillus thuringiensis, showing evidence of lineage according to the signature sequences within the conserved regions. Spore/δ-endotoxin mixtures of the randomly selected isolate S10 were used in a bioassay to test their toxicity against the lepidopteron insect Galleria mellonella. No significant mortalities were reported, but sensitivity to the S10 δ- endotoxin was evident when compared to results using known B. thuringiensis δ- endotoxins at the same concentrations.

Thesis (MScAgric)--University of Stellenbosch, 2001. / ENGLISH ABSTRACT: This study is an integral part of a multidisciplinary research project concerning the effects of soil and climate on wine quality. The motive, which led to the setting up of this project, was that producers could not determine beforehand whether a specific location would yield wines of high or low quality. If a specific cultivar were to be planted at the wrong location, then it was likely that wine of table quality would result, rather than the export quality wine that was intended. The long term objectives of this multidisciplinary project were the compilation of guidelines by means of which different sites may be classified according to their potential for the production of high quality wines, and the identification of the most important climatic and soil factors responsible for differences in wine quality and character. In this multidisciplinary project, measurements (soil water, leaf water potential, cane mass and yield) were made under dry land conditions in Sauvignon blanc vineyards at six different localities: five in the Stellenbosch district (Simonsberg, Kuils River, Helshoogte, Papegaaiberg and Devon Valley) and one in Durbanville. Each vineyard was owned by a private commercial producer. The vines were approximately 10 years old in all cases, and were trained on a hedge system. Measurements were made in plots, each of which contained 20 vines. Two different soil types were identified at each locality. Vine growth and wine quality differed markedly on these contrasting soils, even though they were located in close physical proximity. The measurements that were made at high and low production plots at each locality during this study were obtained from points which were not more than 60 m metres apart. An automatic weather station was erected halfway between the two, contrasting, experimental plots. Within the overall scope of the multidisciplinary project, the study which forms the subject of this thesis, concentrated on the effects of soil parent material as a soil forming parameter and as a possible predetermining character with regard to vine growth and wine character. From literature it was clear at the outset of this work that the geology of the coastal wine region is very complex and varies over short distances. The geological history indicates different types of rock formation and rock forming process (sedimentary, igneous as well as metamorphic), plate tectonic activity, mountain building, erosion and weathering, over a period of approximately 1 000 million years. The present landscape includes a coastal plane, hills, and eroding mountains. Statistical analyses indicated that the soils from the different localities could mainly be characterised in terms of differences in their sand size fractions. Soils from Durbanville are dominated by fine sand and correlates with the underlying phyllitic shales. Soils from Kuils River contain significantly more coarse sand when compared with the other sites. This appears to be a reflection of the underlying coarse granitic material, and implies that in situ weathering played an important role in soil development. .The data did not, however, prove that the Kuils River soils formed solely from underlying rocks. The gravel and stone fraction for the Kuils River soils were nevertheless correlated with those of the underlying parent material. Soils from Helshoogte and Simonsberg (both of which are underlain by granites), Papegaaiberg and Devon Valley (both underlain by hornfels) were not significantly dominated by any particular sand fraction. Soils from these localities therefore did not only reflect the underlying material as a source of soil parent material. This implied mixing of parent material and/or the incursion of eolian sand at Helshoogte, Simonsberg and Devon Valley. A marine incursion may have affected the soil parent material at Papegaaiberg. In order to obtain more information concerning the origins and possible mixing of parent materials prior to and during soil formation, samples from the different soil horizons in each profile were subjected to a chemical analysis. Particular emphasis was placed on potassium, which is an extremely important nutrient mineral element, from the viewpoints of vine growth and wine quality. Because the soils used in this study were all located in production vineyards, the probability that fertiliser residues would have contaminated the soils was high. The lower soil horizons were considered to be least affected by this contamination and therefore most likely to be indicative of the natural soil chemical composition. However, the lower horizon K content of the soils in this study could not be reliably correlated with any known or predicted characteristic that might link the soil parent material with local rock types. At Durbanville, both soils contained small quantities of K in the lower horizons, reflecting the underlying phyllitic shales, but at Devon Valley and Papegaaiberg, the lower horizons contained more K than expected. The soils at these localities are situated on hornfels, containing low quantities of K. The large quantities of K in the soils may have indicated that these soils are situated close to a granite/Malmesbury contact zone. Soils from Kuils River, Simonsberg and Helshoogte are situated on K-rich porhyritic granites and it was expected that these soils would contain relatively large quantities of K in the lower horizons. This, however, was not the case. It was therefore concluded that dilution with K-poor material had taken place. Such material could have been derived from higher-lying sandstones, or from eolian processes during the Cenozoic. Alternatively, the K content of the soil might have been depleted by long continued leaching. A semi-quantitative analysis of the minerals in the soil clay fractions was also carried out. The objective was to identify the clay minerals that were present in the different soil horizons and to relate the minerals to weathering conditions. Evidence linking the minerals in the clay fractions of the soil samples with the mineralogical composition of the soil parent materials was sought. The clay fraction mineralogy data indicated that all soils in the study area are in an advanced stage of weathering and are dominated by kaolinite, and in certain soils quartz. It was difficult to relate these minerals directly with soil parent material because the primary minerals originating from the soil parent materials have been extensively broken down. The simultaneous presence of quartz and gibbsite in the clay fraction of both soils at Simonsberg, Helshoogte and Durbanville as well as one soil form from bath Kuils River and Simonsberg, indicated non-uniform distribution of clay fraction minerals, indicating that different stages of weathering were present during soil formation. This could have been a result of mixing of parent materials, but may also reflect different periods of weathering of the same material. Both soils at Papegaaiberg, both soils at Devon Valley and other soils at Simonsberg and Kuils River indicated uniform clay fraction mineralogy distribution, mainly because the absence of gibbsite is related to the presence of quartz in the clay fraction. The soil characteristics, as determined in this study, were also compared with vine growth, wine quality and wine character, as obtained in the broader multidisciplinary research project. For most soils in this study, an increase in clay fraction kaolinite was associated with a reduction in vegetative growth, overall wine quality, and fresh vegetative character. An increase in clay fraction quartz was associated with higher overall wine quality. Increased shoot growth also affected fresh vegetative character positively. Better growth occurred on higher altitudes and this resulted, for Sauvignon blanc, in higher wine quality. Wines produced from vines situated on both phyllitic shales and porhyritic granites showed high quality (Durbanville and Helshoogte), but both were related to low clay fraction kaolinite content and high altitude. It was not possible to relate parent material directly with vine growth, wine quality and/or wine character. The lowest quality wines, however, were produced from vines situated on hornfels (Papegaaiberg and Devon Valley), both containing high quantities of clay fraction kaolinite and situated on low altitudes. High levels of K in soils containing high levels of clay fraction kaolinite may have been partly responsible for low wine quality obtained on such soils. / AFRIKAANSE OPSOMMING: Hierdie studie vorm 'n integrale deel van 'n multi-dissiplinêre navorsingsprojek oor die effek van grond en klimaat op wynkwaliteit. Die motivering wat gelei het tot die beplanning van hierdie projek, was dat produsente nie vooraf kon bepaal of 'n spesifieke lokaliteit wyne kan produseer van hoë of lae kwaliteit nie. Indien 'n spesifieke kultivar op die verkeerde lokaliteit geplant word, sou dit waarskynlik tot In gewone tafelwyn lei, instede van 'n wyn van uitvoergehalte. Die langtermyn doelwitte van die multi-dissiplinêre projek was om riglyne te ontwikkel om verskillende lokaliteite te klassifiseer na aanleiding van·hul potensiaal om hoë kwaliteit wyne te produseer, asook om die belangrikste klimaats- en grondfaktore verantwoordelik vir die produksie van hoê kwalitiet wyne te identifiseer. In hierdie multidissiplinêre projek was metings (plant beskikbare water, blaarwater potensiaal, lootmassa en oes) onder droêland toestande bepaal in Sauvignon blanc wingerde by ses verskillende lokaliteite: vyf in die Stellenbosch distrik (Simonsberg, Kuilsrivier, Helshoogte, Papegaaiberg and Devon Valley) en een in Durbanville. Elke wingerd is besit deur 'n kommersiêle privaatprodusent. Die stokke was ongeveer 10 jaar oud in alle gevalle en opgelei op 'n heining sisteem. Metings was in eksperimentele blokke van 20 stokke elk uitgevoer. Twee verskillende grondtipes is by elke lokaliteit identifiseer. Lootgroei en wynkwaliteit het merkbaar verskilop die kontrasterende gronde, selfs waar gronde nabyaanmekaar was. Die metings is Liitgevoer op hoë- en lae produksie eksperimentele blokke waar gronde by spesifieke lokaliteite nie verder as 60 meter was nie. 'n Outomatiese weerstasie was halfpad tussen die twee kontrasterende grondtipes by elk van die ses lokaliteite opgerig. Binne die algemene omvang van die multi-clissiplinêre projek, het die studie wat die onderwerp van hierdie tesis is, gekonsentreer op die effek van moedermateriaal as grondvormende parameter asook as moontlike voorspeller van wingerdgroei en wynkarakter. Dit was duidelik uit die literatuur dat die geologie van die Wynkusstreek baie kompleks is en oor kort afstande varieer. Die geologiese geskiedenis dui daarop dat verskillende tipes gesteentes en verskillende prosesse van gesteente-vorming (sedimentêr, stollings- en metamorfe), plaattektoniese aktiwiteit, orogenese, erosie en verwering, oor 'n periode van ongeveer 1 000 miljoen jaar plaasgevind het. Die huidige landskap sluit kusvlaktes, heuwels en geêrodeerde berge in. Statistiese analises het aangetoon dat die gronde van die verskillende lokaliteite hoofsaaklik in terme van verskille in sandgrootte fraksies onderskei kon word. Gronde van Durbanville is gedomineer deur fyn sand en korreleer met onderliggende fillietiese skalies. Gronde van Kuilsrivier bevat betekenisvol meer growwe sand wanneer dit vergelyk word met die ander lokaliteite. Dit is waarskynlik afkomstig vanaf die onderliggende growwe granitiese materiaal en impliseer dat in situ verwering 'n belangrike rol gespeel het in grondontwikkeling. Die data het egter nie bewys dat die gronde van Kuilsrivier slegs uit die onderliggende graniete gevorm het nie. Die gruisfraksies in die gronde by Kuilsrivier was tog vergelykbaar met die onderliggende materiaal. Gronde vanaf Helshoogte and Simonsberg (beide onderlê deur graniete), Papegaaiberg and Devon Valley (beide onderlê deur hornfels) was nie betekenisvol gedomineer deur 'n spesifieke sandfraksie nie. Gronde vanaf hierdie lokaliteite het dus nie slegs die onderliggende gesteentes verteenwoordig nie. Dit dui op vermenging van moedermateriaal en/of eoliese prosesse by Helshoogte, Simonsberg and Devon Valley. 'n Styging in seevlak kon die moedermateriaal by Papegaaiberg beïnvloed het. Om meer inligting omtrent die oorsprong en moontlike vermening van moedermateriaal voor grondvorming te verkry, is die verskillende grondmonsters chemies ontleed. Kalium is In uiters belangrike voedingselement wat lootgroei en wynkwaliteit kan beïnvloed. Aangesien die gronde in hierdie studie in bestaande produksieblokke voorkom, was daar 'n goeie kans dat bemestingstowwe die chemiese samestelling kon beïnvloed. Die C horisonte van die verskillende gronde was beskou as dié wat die minste deur bemesting beYnvloedsou word en die naaste aanduiding van natuurlike grondchemiese samestelling. Die C horison K-inhoude van die gronde in die studie het egter nie gekorreleer met enige eienskap wat die moedermateriaal van die gronde met die lokale gesteentetipe kon verbind nie. By Durbanville, het beide gronde klein hoeveelhede K in die C horisonte bevat, wat die onderliggende fillietiese skalies reflekteer, maar by Devon Valley en Papegaaiberg, het die C horisonte meer K bevat as wat verwag is. Die gronde by hierdie lokaliteite word onderlê deur hornfels, wat lae hoeveelhede K bevat. Die groot hoeveelhede K in hierdie gronde dui moontlik op 'n kontaksone tussen graniet en Malmesbury gesteentes in die area. Gronde vanaf Kuilsrivier, Simonsberg en Helshoogte word onderlê deur K-ryke porfiritiese graniete wat groot hoeveelhede K in die ondergronde sou bevat. Dit was egter nie die geval nie en dit was aanvaar dat verdunning van K-arme materiaal plaasgevind het. Die oorsprong van Karme materiaal was waarskynlik vanaf hoêr-liggende sandstene, of vanaf eoliese prosesse gedurende die Cenozoikum. Alternatiewelik is K inhoude van die gronde verlaag deur lang en aanhoudende loging. 'n Semi-kwantitatiewe analise van minerale in die kleifraksie was uitgevoer om te bepaal watter minerale in die kleifraksie van die verskillende gronde teenwoordig is en om die minerale met stadia van verwering te vergelyk. Dan kon die mineralogiese samestelling in verband met moedermateriaal gebring word. Resultate het aangetoon dat al die gronde in die studie in 'n gevorderde stadium van verwering is en gedomineer word deur kaoliniet, en in sekere gronde, klei fraksie kwarts. Aangesien die primêre minerale in 'n groot mate afgebreek is, was dit moeilik om die minerale in die kleifraksie direk in verband met moedermateriaal te bring. Die voorkoms van kwarts en gibbsiet in die kleifraksie in beide gronde van Simonsberg, Helshoogte en Durbanville asook een grondvorm vanaf beide Kuilsrivier en Simonsberg, het aangetoon dat verskillende stadia van verwering gedurende grondvorming in hierdie gronde voorgekom het. Dit kan die gevolg wees van vermenging van verskillende moedermateriaal, maar kan ook verskillende periodes van verwering van dieselfde materiaal aandui. Beide gronde by Papegaaiberg, beide gronde van Devon Valley die ander gronde by Simonsberg en Kuilsrivier het slegs een fase van verwering tydens grondvorming aangedui, hoofsaaklik as gevolg van die afwesigheid van gibbsiet wanneer kwarts voorkom. Grondeienskappe, soos bepaal in hierdie studie, was ook vergelyk met lootgroei, wynkwaliteit en wynkarakter, soos verkry uit die resultate van die multi-dissiplinêre projek. Vir die meeste gronde in die studie was 'n toename in kleifraksie kaoliniet geassosieer met afname in vegetatiewe groei, algemene wynkwaliteit, asook vars vegetatiewe wynkarakter. 'n Toename in kleifraksie kwarts was geassosieer met hoër algehele wynkwaliteit. 'n Toeneme in vegetatiewe groei het ook die vars vegetatiewe karakter van die wyn positief beïnvloed. Beter vegetatiewe groei het op hoër hoogtes voorgekom en dit het gelei tot hoër wynkwaliteit vir Sauvignon blanc. Wyne afkomstig van wingerde op beide fillietiese skalies en porfiritiese graniete, was van hoër kwaliteit (Durbanville and Helshoogte), maar beide was geassosieer met lae kleifraksie kaoliniet en hoë ligging. Dit was nie moontlik om moedermateriaal direk met vegetatiewe groei, wynkwaliteit en/of wynkarakter te vergelyk nie. Wyne met die laagste kwaliteit kom egter voor op hornfels (Papegaaiberg and Devon Valley), wat beide groot hoeveelhede kleifraksie kaoliniet bevat en geleê is op lae hoogtes. Hoê vlakke van K in gronde wat groot hoeveelhede kleifraksie kaoliniet bevat kan gedeeltelik verantwoordelik wees vir lae kwaliteit wyne op sulke gronde.

Thesis (MScAgric)--Stellenbosch University, 1973. / ENGLISH ABSTRACT: no abstract available / AFRIKAANSE OPSOMMING: geen opsomming

Thesis (M.Sc.)--University of the Witwatersrand, Science Faculty (Geology), 1965 / The geology of the Johannesburg area is extremely diverse in its engineering aspects. A geological and soil map can therefore be of great assistance in planning detailed site investigations that must be carried out before the foundations of a building can be designed. [No abstract provided. Information taken from introduction] / WS2017

A research report submitted to the Faculty of Science, University of the Witwatersrand, in partial fulfilment of the requirements for the degree of Master of Science in Environmental Sciences Johannesburg, 2017. / PCBs are chemical compounds which were synthesised in the laboratory in the 1920s. They are classified under the category of POPs. They were mainly used in electrical equipments and transformers as the insulating material. PCBs were released to the environment in the form of oil spillages, combustion of PCB-containing equipments and others. Its production was banned in the 1970s after its toxic, persistent, bioaccumulative and carcinogenic behaviour was discovered. This study was conducted to determine and monitor the level of PCB in soil contaminated by oil spillages from pole mounted transformers in Polokwane, Limpopo, South Africa after sites have been remediated. Seventy eight soil samples were collected from five sites. The QuEChERS extraction method and GC-MS was used to extract and analyse PCBs. The PCB congeners targeted in this study are PCB-180, PCB-158 and PCB-101. The concentration of PCB-180 ranges between 10.02 and 78.30 μg kg -1, PCB-158 ranges between 3.89 and 45.36 μg kg -1 and PCB-101 ranges between 2.42 and 39.12 μg kg -1. The PCB congener with the highest concentration at all sites is PCB-180 followed by PCB-158 while PCB-101 has the least concentration; this order is consistent in all sampling sites. PCB concentrations after bioremediation were found to be extremely higher than concentrations before bioremediation which suggest that the bioremediation process was not efficient including actual analytical methods used. In comparison to the range of the PCB levels reported in literature, the PCB concentration determined from this study is found within a higher range. The PCBs concentration at all five sites was found to be below the legal limits. / LG2018

A computer simulation model of the soil water regime can be a useful research, planning and management tool, providing that the data required by the model are available. Finite difference solutions of the general flow equation can be applied to complex field situations if soil profile characteristics are reflected by appropriate retentivity (B( Ψ)) and hydraulic conductivity (K(Ψ)) functions. The validity of a flow simulation model depends upon the degree to which simulated flow corresponds to the flow pattern in real soils. Macroscopic flow in apedal soils is likely to obey Darcy's law but in structured or swe~ling soils, macro-pores and shrinkage voids lead to non-Darcian flow. Physical composition and structural stability properties of a wide range of South African soils were used to assess swelling behaviour and depth-related textural changes. The applicability of a one-dimensional Darcian flow model to various soil types was evaluated. Core retentivity data for South African soils were used to derive regression equations for predicting B (Ψ) from textural criteria and bulk density. A sigmoidal, non-hysteretic two-part retentivity function having only two constants in addition to porosity was developed for use in water flow simulation models. Values of the constants, shapes of the retentivity curves and soil textural properties were related by fitting the retentivity function to retentivity data generated using regression equations~ Hydraulically inhomogeneous soils may be modelled by varying the values of the retentivity constants through the profile to reflect changing soil properties. Equations for calculating K(B) or K(Ψ) from retentivity data were derived by applying each of three capillary models to both exponential and two-part retentivity functions. Comparison of these equations showed that the definition and value of semi-empirical constants in the capillary models were as important as the choice of model in determining K(B). K(Ψ) was calculated using retentivity constants corresponding to a range of bulk density, clay and silt content combinations. Three retentivity constant-soil property systems were evaluated. These were derived from retentivity data for South African soils between 1) -10 and -1500 kPa, 2) 0 and -50 kPa and 3) from published retentivity data for British soils. Only that derived from retentivity data accurate in the 0 to -50 kPa range led to K(Ψ) relationships in which saturated K and the slope sK/sΨ decreased as bulk density, clay or silt content increased. Absolute values of K were unreliable and measured values are essential for matching purposes. A method for evaluating the constants in a K(Ψ) or K(B) function from the rate of outflow or inflow of water after a step change in potential at the base of a soil core was described. Simple exponential g (Ψ) and K(Ψ) functions were assumed to apply to each pressure potential range. Retentivity parameters were obtained by fitting the 8(Ψ) function to the measured retentivity curve. A value for K[s] , the remaining unknown parameter in the K(Ψ) function, was obtained by matching measured outflow and inflow data to a family of simulated curves. These were computed using measured retentivity parameters, core dimensions and ceramic plate conductivity, and a range of K[s] values. An advantage of this method is that there are no limitations on core length, plate impedance or pressure potential range which cannot be ascertained by prior simulation. Regression equations relating texture to retentivity, and a conductivity model were applied in a simulation study of the water regime in a weighing lysimeter in which gains and losses of water were measured accurately. Active root distribution was assumed proportional to root mass distribution. Relative K(Ψ) curves for each node were computed using one of the conductivity equations derived earlier. Daily water potentials for a month were simulated using three conductivity matching factors. By matching simulated Ψ values to tensiometer potentials measured at five depths an appropriate matching factor was chosen. The effects of an over- or underestimate of K(Ψ) were demonstrated. This work simplifies the prediction and use of retentivity and conductivity relationships in soil water flow simulation models. These models can be used for assessing the water regime in both irrigated and dry-land crop production. Other applications include catchment modelling, effluent disposal and nutrient and solute transport in soil. / Thesis (Ph.D.)-University of Natal, Pietermaritzburg, 1983.

Thesis (MTech (Chemical Engineering))--Peninsula Technikon, 2001 / Certain fungi have been shown to excrete extracellular enzymes, including peroxidases, laccases, etc. These enzymes are useful for bioremediation of aromatic pollutants present in industrial effluents (Leukes, 1999; Navotny et aI, 1999). Leukes (1999) made recent significant development in the form of a capillary membrane gradostat (fungal) bioreactor that offers optimal conditions for the production of these enzymes in high concentrations. This system also offers the possibility for the polluted effluent to be treated directly in the bioreactor. Some operating problems relating to continuous production of the enzymes and scale-up of the capillary modules, were, however, indentified. In an attempt to solve the above-mentioned identified problems the research group at Peninsula Technikon considered a number of alternative bioreactor configurations. A pulsed packed bed bioreactor concept suggested by Moreira et at. (1997) was selected for further study. Their reactor used polyurethane pellets as the support medium for the fungal biofilm and relied upon pulsing of the oxygen supply and recycle of nutrient solution in order to control biomass accumulation. These authors reported accumulation due to the recycle of proteases that were believed to destroy the desired ligninases. We experimented with a similar concept without recycle to avoid backrnixing and thereby overcome protease accumulation. In our work, a maximum enzyme productivity of 456 Units.L1day·1 was attained. Since this was significantly greater than the maximum reported by Moreira et aI, 1997 (202 Units.L-1day-I) it appeared that the elimination of recycle had significant benefits. In addition to eliminating recycle we also used a length / diameter (L / D) ratio of 14: 1 (compared with 2.5: 1 used by Moreira et aI, 1997) in order to further reduce backrnixing. Residence time distributions were investigated to gain insight into mechanisms of dispersion in the reactor. It was found that the pulsed packed bed concept presented problems with regard to blockage by excess biomass. This led us to consider the advantages of a fluidized bed using resin beads. Accordingly, growth of fungi on resin beads in shake flasks was investigated with favorable results. An experimental program is proposed to further investigate the fluidized bed concept with a view to extending the operation time of the bioreactor. From our literature survey to date, packed bed fungal bioreactors are still the best reactor configuration for continuous production ofligninolytic enzymes. An interesting study of the application of laccases to the degradation of naphthalene and MTBE is described in an addendum to this thesis.

Thesis (M.Sc. (Soil Science)) --University of Limpopo (Turfloop campus), 2007 / The influence of parent material on physical and chemical properties of soil was studied on granite and schist derived soils on the Syferkuil Experimental Farm, situated in the Mankweng area of the Limpopo Province of South Africa. A total of 49 samples of virgin soils were collected, where granite soils constituted 26 samples and schist soils 23. The study design that was used is cross-sectional. The samples were analysed for physical and chemical properties. The physical properties of granite and schist soils were determined as percentages coarse sand, percentages medium sand, percentages fine sand, percentages very fine sand, percentages silt and percentages clay, whilst the chemical properties were determined as concentrations (cmol (+) kg-1) of Na, Mg, Ca, K ,ESP, CEC and P (mg kg-1), as well as pH. Statistical analysis of the results was performed by application of the Unpaired Student’s T Test, with the level of significance at p<0.05. The results showed that soils derived from granite had significantly higher coarse and medium sand fractions than schist soils; whereas schist soils were significantly higher in fine sand, very fine sand, silt and clay. The concentrations of Na, Ca, ESP and P, as well as CEC and pH in schist derived soils were higher than in granite derived soils although the differences were insignificant. However, significant differences occurred in K and Mg concentrations where schist derived soils had higher concentrations than granite derived soils. However, the concentrations of nutrient elements were found to be insufficient for proper production in agriculture. The sodium concentration was found to be low enough to not lead to sodic soil conditions. It was concluded that both granite and schist soils can be used for agriculture but require careful management because both soils indicated poor nutritional status.

Thesis (MTech. degree in Chemistry)--Tshwane University of Technology, 2010.