• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 2
  • Tagged with
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
1

Modelling and Techno-economic Analysis of a Hybrid CSP/PV System using Solid Oxide Electrolyser for Hydrogen Production

Tang, Chuanyin January 2023 (has links)
This project proposes a solar-driven hybrid system for electricity generation and hydrogen production, which includes concentrated solar power (CSP), photovoltaic (PV), solid oxide electrolyser (SOEC). Electricity from the CSP and PV provides a continuous 24/7 supply to meet demand-side power consumption. When demand-side power consumption is low, the excess power is used to electrolyse water in the SOEC system. In this study, an SOEC is modelled, operation strategy for the solar-driven hybrid system is developed, the techno-economic performance of the overall system is evaluated, and sensitivity analysis is performed. For the modelling part, first develop an SOEC component in Matlab and Trnsys by considering the electrochemical model, thermal model and electric model. Second, design the hybrid system layout and simulate the system under 8760 hours in Matlab and Trnsys. The hybrid system is divided into five blocks: Heat Energy Source Block, Thermal Energy Storage Block, Rankine Cycle Block, Photovoltaic Block, Power to Hydrogen (PtH) Block. The operation strategy is: the heat is collected using a tower solar receiver and stored in tanks by heat transfer fluid molten salt. These thermal energy heats the water in heat exchangers and the resulting high temperature water vapour is used in steam turbine to generate electricity; at the same time part of the heat transfer fluid heats the feedwater in the PtH block and the resulting high temperature water vapour is used in SOEC for hydrogen production, if the operation temperature of steam in SOEC is not reached after heat exchange, the electric heater will heat the steam to raise the temperature. The CSP and PV provide electricity to demand side and SOEC. The produced hydrogen will be transported by truck or ship after compressed. For results part, the minimum CSP configurations to provide a 24/7 demand-side electricity consumption is a solar multiple (SM) with 2 and thermal storage (TES) size of 14 hours. SOEC stack has the best techno-economic performance at a nominal power of 275 Watt. The hybrid system has a levelised cost of electricity (LCOE) at 0.219 USD/kWh and a levelised cost of hydrogen (LCOH) at 7.5 USD/Kg. There are several sensitivity parameters for increase the energy productivity and decrease levelised cost. The larger the SM, the better the ability to generate power. The larger the TES size, the more the hourly generation is similar, otherwise it will fluctuate more. Increasing the SM results in a higher LCOE and a significantly lower LCOH. Increasing TES size also increases the LCOE, whereas the TES size has a marginal impact on the decrease of LCOH. Increased installed capacity inevitably leads to increased power generation. The increasing total power capacity makes the surplus power at the same demand side increase, so the SOEC runs at higher input power and the total hydrogen production increases, resulting in a lower LCOH. The effect of SOEC capacity on LCOH depends on the relationship between input power and SOEC nominal power. Higher operation temperature of SOEC leads to the lower the reversible voltage and an increasing consumption for water vapour. However, when the water vapour concentration is too high, the electrolysis current will instead drop, meaning that the rate of hydrogen production will drop.
2

Techno-Economic Assessment of High-Temperature H2O/CO2 : Co-Electrolysis in Solid Oxide Electrolysers for Syngas Production / Teknoekonomisk Bedömning av Hög temperatur H2O/CO2 : Samelektrolys i fast material Oxidelektrolysörer för Syngas produktion

Jambur, Shivani Ramprasad January 2022 (has links)
High-temperature Co-electrolysis of H2O and CO2 in a solid-oxide electrolyser (Co-SOE) for syngas production is a high-efficiency renewable electricity conversion and storage method part of the Power-to-X technologies. Syngas, a mixture of H2, CO and CO2, is a critical building block to make several chemical and synthesis fuels. The thesis aimed to model the Co-electrolysis process in a steady-state process modelling tool called Aspen Plus. The model was designed at thermoneutral mode and four cases with electrolysis temperatures of 700 °C, 750 °C, 800 °C and 850°C. The results from the model were used to perform an economic assessment and check the feasibility of Co-SOE. The analysis included calculation of Net Present Value (NPV), Internal Rate of Return (IRR) and the Levelised cost of Syngas (LCOS). The LCOS from Co-SOE was compared to the benchmark technology of syngas production in a Reverse Water Gas Shift (RWGS) reactor. The H2 feed to the RWGS reactor was assumed to be obtained from a Proton Exchange Membrane Electrolyser(PEME). A sensitivity analysis was performed to check the effect of electricity price, electrolyser stack price, electrolyser lifetime, CO2 feed price, by-product O2 revenue and discount rate on the LCOS. The LCOS was calculated to be 0.697, 0.727, 0.752 and 0.783 €/kg at 700 °C, 750 °C, 800 °C and 850 °C, respectively, increased with temperature due to increased electricity consumption at thermoneutral mode. The average LCOS from Co-SOE was 18.5% cheaper than the benchmark technology due to the high investment in the PEME and low conversion efficiency of the RWGS process. There was a trade-off between LCOS and system efficiency due to the effect of internal methanation occurring on the cathode side of the SOE. 750 °C was found to be the optimum design temperature to minimise the LCOS and maximise the efficiency. LCOS was most sensitive to electricity price, followed by O2 revenue and discount rate, while other parameters were less significant. The thesis also discussed key challenges to overcome in the future development of the Co-SOE technology. Co-SOE was found to be a promising technology for green syngas production. However, challenges concerning low stack lifetime, high capital investment and high cost of electricity have yet to be overcome to demonstrate it at a commercial scale.

Page generated in 0.0736 seconds