The stability of electrode/electrolyte interfaces in Li-ion batteries is crucial to the performance, lifetime and safety of the entire battery system. In this work, interface processes have been studied in LiFePO4/graphite Li-ion battery cells.  The first part has focused on improving photoelectron spectroscopy (PES) methodology for making post-mortem battery analyses. Exposure of cycled electrodes to air was shown to influence the surface chemistry of the graphite. A combination of synchrotron and in-house PES has facilitated non-destructive interface depth profiling from the outermost surfaces into the electrode bulk. A better understanding of the chemistry taking place at the anode and cathode interfaces has been achieved. The solid electrolyte interphase (SEI) on a graphite anode was found to be thicker and more inhomogeneous than films formed on cathodes. Dynamic changes in the SEI on cycling and accumulation of lithium close to the carbon surface have been observed.    Two electrolyte additives have also been studied: a film-forming additive propargyl methanesulfonate (PMS) and a flame retardant triphenyl phosphate (TPP). A detailed study was made at ambient and elevated temperature (21 and 60 °C) of interface aging for anodes and cathodes cycled with and without the PMS additive. PMS improved cell capacity retention at both temperatures. Higher SEI stability, relatively constant thickness and lower loss of cyclable lithium are suggested as the main reasons for better cell performance. PMS was also shown to influence the chemical composition on the cathode surface. The TPP flame retardant was shown to be unsuitable for high power applications. Low TPP concentrations had only a minor impact on electrolyte flammability, while larger amounts led to a significant increase in cell polarization. TPP was also shown to influence the interface chemistry at both electrodes. Although the additives studied here may not be the final solution for improved lifetime and safety of commercial batteries, increased understanding has been achieved of the degradation mechanisms in Li-ion cells. A better understanding of interface processes is of vital importance for the future development of safer and more reliable Li-ion batteries.

Limiter le vieillissement des accumulateurs lithium-ion est un challenge pour optimiser leur utilisation notamment dans le domaine spatial. La qualité de la couche de passivation (SEI), formée à la surface de l’électrode négative de graphite lors des premiers cycles de vie de la batterie, est déterminante pour ses performances futures. Celle-ci est composée de polymères et de divers sels de lithium dont la dissolution, la précipitation et la migration affectent les performances. Cette étude vise à comprendre l’impact de ces composés sur la cyclabilité et de proposer des solutions à l’effet néfaste de ces sels sur le bon fonctionnement et le vieillissement de l’accumulateur Li-ion. La première partie de ce travail aborde l’impact de divers sels de lithium de la SEI (LiF, Li2CO3, LiOH, LiOCH3, LiOC2H5) sur le comportement en cyclage des accumulateurs. Par la suite, nous avons proposé des solutions pour améliorer le comportement qu’engendre la présence de ces sels sur les performances à travers deux approches. La première concerne l’utilisation de co-solvants complexants de la famille des glymes. La seconde approche consiste à modifier les propriétés interfaciales électrodes/électrolyte par l’ajout d’additifs tensioactifs à l’électrolyte. Les résultats montrent dans les deux cas des améliorations notables de la cyclabilité des dispositifs en demi-pile et en cellule complète. / Limiting the lithium-ion batteries ageing is a challenge to overcome in the field of spatial applications. The quality of the solid electrolyte interfaces (SEI), created at the electrode surface during the first cycles of the battery, is decisive for its future performances. The SEI is composed of polymers and several lithium salts which are able to dissolve, precipitate and migrate in the electrolyte and hence modify the battery performances. This study aims to understand the impact of the dissolution of these compounds on the cell cycling ability and to propose solutions to avoid the harmful effects of these salts on the battery ageing. The first part of this study is devoted to the study of the effect of dissolved SEI lithium salts (LiF, LiOH, Li2O, Li2CO3 , LiOCH3, LiOC2H5) on the cycling ability of half and full cells.In order to improve the battery performances in spite of the presence of these SEI salts in the electrolyte, two solutions have been examined. The first one is to add a co-solvent belonging to the glyme family which is able to form complexes with lithium ions and the second to use a surfactant additive which will modify the interfacial electrode/electrolyte properties. Results show that in both cases an improvement in half-cell or full-cell cycling ability was achieved.