High data rate applications are the trend in today's wireless technology. W-CDMA standard was designed to support such high data rates of up to 3.84 Mcps. The main purpose of this research was to analyze the feasibility of a fixed-point implementation of the W-CDMA downlink receiver algorithm on a general-purpose digital signal processor (StarCore SC140 by Motorola). The very large instruction word architecture of SC140 core is utilized to generate optimal implementation, to meet the real time timing requirements of the algorithm. The other main aim of this work was to study and evaluate the performance of the W-CDMA downlink structure with incorporated space-time transmit diversity. The effect of the channel estimation algorithm used was extensively studied too.

abstract: Practical communication systems are subject to errors due to imperfect time alignment among the communicating nodes. Timing errors can occur in different forms depending on the underlying communication scenario. This doctoral study considers two different classes of asynchronous systems; point-to-point (P2P) communication systems with synchronization errors, and asynchronous cooperative systems. In particular, the focus is on an information theoretic analysis for P2P systems with synchronization errors and developing new signaling solutions for several asynchronous cooperative communication systems. The first part of the dissertation presents several bounds on the capacity of the P2P systems with synchronization errors. First, binary insertion and deletion channels are considered where lower bounds on the mutual information between the input and output sequences are computed for independent uniformly distributed (i.u.d.) inputs. Then, a channel suffering from both synchronization errors and additive noise is considered as a serial concatenation of a synchronization error-only channel and an additive noise channel. It is proved that the capacity of the original channel is lower bounded in terms of the synchronization error-only channel capacity and the parameters of both channels. On a different front, to better characterize the deletion channel capacity, the capacity of three independent deletion channels with different deletion probabilities are related through an inequality resulting in the tightest upper bound on the deletion channel capacity for deletion probabilities larger than 0.65. Furthermore, the first non-trivial upper bound on the 2K-ary input deletion channel capacity is provided by relating the 2K-ary input deletion channel capacity with the binary deletion channel capacity through an inequality. The second part of the dissertation develops two new relaying schemes to alleviate asynchronism issues in cooperative communications. The first one is a single carrier (SC)-based scheme providing a spectrally efficient Alamouti code structure at the receiver under flat fading channel conditions by reducing the overhead needed to overcome the asynchronism and obtain spatial diversity. The second one is an orthogonal frequency division multiplexing (OFDM)-based approach useful for asynchronous cooperative systems experiencing excessive relative delays among the relays under frequency-selective channel conditions to achieve a delay diversity structure at the receiver and extract spatial diversity. / Dissertation/Thesis / Ph.D. Electrical Engineering 2013

FundaÃÃo Cearense de Apoio ao Desenvolvimento Cientifico e TecnolÃgico / In this work, the performance of MIMO systems based on space-time coding is investigated through multilinear algebra, more specifically, by means of tensor decompositions, pulling away a bit from commonly used matrix models. We assume a system composed of P transmit and M receive antennas, consisting of a combination of a space-time block code (STBC) with a formatting filter. This filter is formed by a precoding matrix and a matrix that maps the precoded signal onto the transmit antennas. For the considered system, two contributions are presented to solve the problem of channel estimation. First, we propose a tensor-based channel estimation method for orthogonal STBCs in MIMO systems, by focusing on the specific case of the Alamouti scheme. We resort to a third order PARATUCK2 tensor model for the received signal, the third dimension of which is related to the presence of the formatting filter. By capitalizing on this tensor model, a channel estimation method based on the alternating least squares (ALS) algorithm is proposed. As a second contribution, a generalization of this method to an arbitrary nonorthogonal STBC is made, where a generalized structure is proposed for the formatting filter, introducing a fourth dimension into the tensor signal model. In this case, we make use of the PARATUCK(2-4) model followed by its reduction to a structured PARAFAC model, from which a closed-form solution to the channel estimation problem is established. The performance metrics considered for evaluating the proposed channel estimation method are: (I) the quality of the estimation in terms of NMSE and (II) the system reliability in terms of Bit Error Rate. / Neste trabalho, o desempenho de sistemas MIMO baseados em codificaÃÃo espaÃo temporal à investigado via Ãlgebra multilinear, mais especificamente, por meio de decomposiÃÃes tensoriais, afastando-se um pouco dos modelos matriciais comumente adotados. Assume-se um sistema composto de P antenas transmissoras e M receptoras, consistindo de uma combinaÃÃo de um cÃdigo espaÃo-temporal em bloco com um filtro formatador. Esse filtro à formado por uma matriz de prÃ-codificaÃÃo e uma matriz que mapeia os sinais prÃ-codificados nas antenas transmissoras. Para o sistema considerado, duas contribuiÃÃes sÃo apresentadas para solucionar o problema de estimaÃÃo de canal. Primeiro, à proposto um mÃtodo tensorial de estimaÃÃo de canal para STBCs ortogonais em sistemas MIMO, tomando-se como exemplo o esquema de Alamouti. Tal mÃtodo faz uso de um modelo tensorial PARATUCK2 de terceira ordem para o sinal recebido, cuja terceira dimensÃo està associada à presenÃa do filtro formatador. Aproveitando-se desse modelo tensorial, um mÃtodo de estimaÃÃo de canal baseado no algoritmo dos mÃnimos quadrados alternados à proposto. Como uma segunda contribuiÃÃo, uma generalizaÃÃo desse modelo para um STBC nÃo ortogonal arbitrÃrio à feita, em que uma estrutura generalizada à proposta para o filtro formatador, introduzindo uma quarta dimensÃo no modelo tensorial de sinal. Neste caso, faz-se uso do modelo PARATUCK(2-4) seguido pela sua reduÃÃo a um modelo PARAFAC estruturado, a partir do qual uma soluÃÃo em forma fechada para o problema de estimaÃÃo de canal à estabelecida. As mÃtricas de desempenho consideradas para avaliaÃÃo dos mÃtodos de estimaÃÃo de canal propostos sÃo: (I) A qualidade da estimaÃÃo do canal em termos de NMSE e (II) a confiabilidade do sistema em termos de Taxa de Erro de Bit.

Abstract High computational complexity constrains truly exhaustive computer searches for good space-time (ST) coded modulations mostly to low constraint length space-time trellis codes (STTrCs). Such codes are primarily devised to achieve maximum transmit diversity gain. Due to their low memory order, optimization based on the design criterion of secondary importance typically results in rather modest coding gains. As another disadvantage of limited freedom, the different low memory order STTrCs are almost exclusively constructed for either slow or fast fading channels. Therefore in practical applications characterized by extremely variable Doppler frequencies, the codes typically fail to demonstrate desired robustness. On the other hand, the main drawback of eventually increased constraint lengths is the prohibitively large decoding complexity, which may increase exponentially if optimal maximum-likelihood decoding (MLD) is applied at the receiver. Therefore, robust ST coded modulation schemes with large equivalent memory orders structured as to allow sub-optimal, low complexity, iterative decoding are needed. To address the aforementioned issues, this thesis proposes parallel concatenated space-time turbo coded modulation (STTuCM). It is among the earliest multiple-input multiple-output (MIMO) coded modulation designs built on the intersection of ST coding and turbo coding. The systematic procedure for building an equivalent recursive STTrC (Rec-STTrC) based on the trellis diagram of an arbitrary non-recursive STTrC is first introduced. The parallel concatenation of punctured constituent Rec-STTrCs designed upon the non-recursive Tarokh et al. STTrCs (Tarokh-STTrCs) is evaluated under different narrow-band frequency flat block fading channels. Combined with novel transceiver designs, the applications for future wide-band code division multiple access (WCDMA) and orthogonal frequency division multiplexing (OFDM) based broadband radio communication systems are considered. The distance spectrum (DS) interpretation of the STTuCM and union bound (UB) performance analysis over slow and fast fading channels reveal the importance of multiplicities in the ST coding design. The modified design criteria for space-time codes (STCs) are introduced that capture the joint effects of error coefficients and multiplicities in the two dimensional DS of a code. Applied to STTuCM, such DS optimization resulted in a new set of constituent codes (CCs) for improved and robust performance over both slow and fast fading channels. A recursive systematic form with a primitive equivalent feedback polynomial is assumed for CCs to assure good convergence in iterative decoding. To justify such assumptions, the iterative decoding convergence analysis based on the Gaussian approximation of the extrinsic information is performed. The DS interpretation, introduced with respect to an arbitrary defined effective Hamming distance (EHD) and effective product distance (EPD), is applicable to the general class of geometrically non-uniform (GNU) CCs. With no constrains on the implemented information interleaving, the STTuCM constructed from newly designed CCs achieves full spatial diversity over quasi-static fading channels, the condition commonly identified as the most restrictive for robust performance over a variety of Doppler spreads. Finally, the impact of bit-wise and symbol-wise information interleaving on the performance of STTuCM is studied.

The United States (U.S.) Army Yuma Proving Ground (YPG) conducted a series of rotary-wing flight tests for the sole purpose of checking out Telemetry data link instrumentation. Four flights were conducted at YPG in February 2016 that built upon an earlier test flight conducted in June 2015. The most recent iteration of testing examined the benefits of frequency diversity on aircraft and the spatial diversity of receiving sites using existing hardware at YPG. Quantitative analysis from those flight results will be presented and include discussion on how results will affect future mission operations at YPG.

No description available.

Space-time codes (STC) are a class of signaling techniques, offering coding and diversity gains along with improved spectral efficiency. These codes exploit both the spatial and the temporal diversity of the wireless link by combining the design of the error correction code, modulation scheme and array processing. STC are well suited for improving the downlink performance, which is the bottleneck in asymmetric applications such as downstream Internet. Three original contributions to the area of STC are presented in this dissertation. First, the development of analytic tools that determine the fundamental limits on the performance of STC in a variety of channel conditions. For trellis-type STC, transfer function based techniques are applied to derive performance bounds over Rayleigh, Rician and correlated fading environments. For block-type STC, an analytic framework that supports various complex orthogonal designs with arbitrary signal cardinalities and array configurations is developed. In the second part of the dissertation, the Virginia Tech Space-Time Advanced Radio (VT-STAR) is designed, introducing a multi-antenna hardware laboratory test bed, which facilitates characterization of the multiple-input multiple-output (MIMO) channel and validation of various space-time approaches. In the third part of the dissertation, two novel space-time architectures paired with iterative processing principles are proposed. The first extends the suitability of STC to outdoor wireless communications by employing iterative equalization/decoding for time dispersive channels and the second employs iterative interference cancellation/decoding to solve the error propagation problem of Bell-Labs Layered Space-Time Architecture (BLAST). Results show that remarkable energy and spectral efficiencies are achievable by combining concepts drawn from space-time coding, multiuser detection, array processing and iterative decoding. / Ph. D.

Wireless systems are rapidly developing to provide high speed voice, text and multimedia messaging services which were traditionally offered by wire line networks. To support these services, channels with large capacities are required. Information theoretic investigations have shown that Multiple Input Multiple Output (MIMO) channels can achieve very high capacities. Space-Time Block Coding (STBC) and Bell Labs Layered Space-Time Architecture (BLAST) are two potential schemes which utilize the diversity offered by MIMO channels to provide reliable high date rate wireless communication. This work studies the sensitivity of these two schemes to spatial correlation in MIMO channels. The first part of the thesis studies the effect of spatial correlation on the performance of STBC by using Geometrically Based Single Bounce MIMO (GBSB-MIMO) channel models. Performance is analyzed for two scenarios: one without scatterers in the vicinity of the transmitter and other with scatterers. In the second part of the thesis, the sensitivity of BLAST to spatial correlation is analyzed. Later, schemes which use the principles of Multilayered Space-Time Coded Modulation to combine the benefits of BLAST and STBC are introduced and their performance is investigated in correlated and uncorrelated Rayleigh fading. Results indicate that schemes using orthogonal design space-time block codes are reasonably robust to spatial correlation while schemes like BLAST are very sensitive as they depend on array processing to separate signals from various transmit antennas. / Master of Science

This thesis discuss on new technique called space time block coding (especially Alamouti's code) which is used to increase capacity and reliability of data transmission over time varying multi-path fading channel. The over all work of the thesis included in the following four chapters. In chapter-1 we are going to cover some theoretical part which is useful to understand thesis work and in chapter-2 we will discuss the comparison between simple space time block code (Alamouti's code) and MRRC (Maximum Ratio Receiver Combining) which is receiver diversity and then in chapter-3 we will see the channel capacity & probability error performance for 2x2 Alamouti code over Rayleigh and Rice fading channel .Finally the conclusion and further work included in chapter-4.

This thesis presents a comparison between two transmit diversity schemes, namely space-time coding and time-switched transmit diversity (TSTD) over block-fading and time-varying multi-input single-output (MISO) channels with different channel parameters. The schemes are concatenated with outer channel codes in order to achieve spatio-temporal diversity. The analytical results are derived for the error performances of the systems and the simulation results as well as outage probabilities are provided. Besides, the details of the pilot-symbol-aided modulation (PSAM) technique are investigated and the error performances of the systems are analyzed when the channel state information is estimated with PSAM. It is demonstrated using the analytical and simulation results that TSTD have a comparable error performance with the space-time coding techniques and it even outperforms the space-time codes for some channel parameters. Our results indicate that TSTD can be suggested as an alternative to space-time codes in some time-varying channels especially due to the implementation simplicity.