Simultaneous two-point three-component four-sensor hot-wire velocity measurements taken in three flows of aeroacoustic interest are here analyzed. The analyses provide information on the turbulence structure of the flows as it would be encountered by hypothetical noise producing blades passing through the flows. Two-point measurements taken in the first flow, a lifting wake from a rectangular NACA 0012 half wing, are used to calculate space-time correlation functions and 'pointwise' wave number frequency spectra. Two upwash spectra, calculated for locations in the region of the wake that is roughly homogenous in the spanwise direction, are direct estimates of the full wave number frequency spectra at their locations. As such, they are used to perform aeroacoustic calculations, and the results are compared to results achieved using the von Kármán isotropic spectrum. Amiet's approximation, where the wave number frequency spectra can be represented by the correlation length scales is found to hold reasonably well for the measured spectra. The two-point measurements in the second flow, a vortex/blade-tip interaction, are analyzed to provide information useful to researchers of blade-wake interaction noise produced by helicopter rotors. Space-time correlation functions and wave number frequency spectra are calculated for five cuts through the region of interaction. The correlation functions provide information concerning the turbulence length scales found in the interaction region. The spectra are compared to the von Kármán isotropic spectrum and found to be greatly different. However, the spectra do bear some resemblance to spectra calculated in the spanwise homogenous region of the lifting wake. The two-point measurements taken in the third flow, the wake from a fan cascade, are analyzed to provide information of use to modelers of broadband noise produced through rotor wake/stator interactions. In particular, space-time correlation functions are calculated for a grid of two-point measurements, which allows the estimation of the turbulence structure as seen by a passing stator blade. Space-time correlation functions and wave number frequency spectra are calculated for various stator configurations. The implications of engine operating speed and stator configuration for broadband noise production are discussed. <i> [Vita removed March 2, 2012. GMc]</i> / Master of Science

No description available.

Turbulent wakes generated from an aircraft or submarine vehicles has been of main interest to researchers due to the broad band noise associated with such wakes. One such case is the noise generated by spiral vortices shed of from one blade interacting with another oncoming blade of helicopter rotor. Consequently, researchers have been trying to understand the basic physics and evolution of such wakes. Although there has been numerous studies done on plane wakes, there has been little research being done on laterally curved wakes. Single and two-point velocity measurements were taken on a plane and laterally curved turbulent wakes to understand the evolution and effect of lateral curvature into the far wake region. The analyses provide useful information in modeling curved or spiral wakes such as turbulence field surrounding tip vortices shed from a wing. In order to achieve our objectives, the Virginia Tech 3’ x 2’ subsonic wind tunnel was used to take velocity measurements of toroidal ring model and a straight cylinder as a control case. Velocity measurements were done using four sensor hot-wire anemometers, to obtain all mean velocity, Reynolds stress, triple product components of the turbulence field. Single point, spectra and two-point measurements of the wakes were performed throughout the development into the far wake region. The single point results reveal the universality of the mean axial velocity, however the Reynolds stresses and triple products were not universal illustrating that the turbulence field has its own length and velocity scales different from that of the mean flow. The effect of lateral curvature is mainly evidenced in the early development of the curved ring wake. The turbulent energy budget reveals similar trend for both wakes and plane wake achieves approximate equilibrium. The spectra result reveals for the plane wake that self-preservation is achieved for all scales of motion, while the ring wake does not achieve such a state. While the longitudinal correlations of both wakes are similar in form, in general difference in form and orientation prevailed over all indicating the difference in the turbulent structure of both wakes. Linear stochastic estimation reveals the presence of spanwise and double-roller eddy structures in the plane wake and only spanwise eddies were detected for the ring wake. / Master of Science