Rhenium complexes coordinated with suitable organic ligand gain increased interest in radiopharmaceutical medicine. Besides suitable radiological properties given by a metal ion itself, detailed knowledge of overall chemical properties of formed complexes, namely their exact structures, chemical stabilities and possible degradation pathways are essential pre-requisites for their clinical application. Selected rhenium complexes with pyrogallol 2,3-dihydroxynaphthalene and catechol as strongly bound ligands were prepared by a reaction of tetrabutylammonium tetrachlorooxorhenate with twofold molar excess of ligand in presence of various amount of triethylamine. The structures of formed complexes and their consequent reaction products were estimated by means of mass spectrometry with electrospray ionization. The kinetics of reactions in course of complex formation and consequent decomposition were primarily followed by UV- Vis absorption spectra measurement, complemented by single or continuous electrospray mass spectrometry analyses. Optimized HPLC and CZE procedures were utilized for monitoring of the composition of reaction mixtures in course of Re complex formation and for purity check of prepared complexes. Semi-preparative HPLC mode was succesfully utilized for isolation and final purification of...

The presented thesis deals with UV-photochemical generation of volatile compounds of Se and Te from various species. The aim of the project was to expand the current state of knowledge by the application of photocatalytic reduction of higher oxidation states of Se and Te for the speciation analysis based on UV-photochemical generation of volatile compounds. The first step of the study was the assembly of the apparatus for the photocatalysed UV-photochemical generation of volatile compounds. The material of reactor and the whole experimental set-up were based on literature survey and previous research done in our research group. Experiments were directed towards finding the optimum conditions for generation of volatile compounds of selected model elements Se and Te. Se was studied as the element most commonly determined by the UV-photochemical generation of volatile compounds. Conversely, Te was selected as a model analyte representing elements forming less stable volatile compounds. The second part was the application of the optimised method of photocatalysed UV- photochemical generation of volatile Se compound to the determination of Se in water matrices, liquid certified reference materials and also samples of dietary supplements. TiO2/UV-photochemical generation was also successfully modified to...

This master's thesis deals with the optimization of conditions of chemical hydride generation (HG) of bismuth, its atomization and detection by atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS). Two types of atomizers were used for atomization of volatile species, a miniature diffusion flame for AAS as well as for AFS and a flame-in-gas-shield atomizer for AFS. At first, the parameters of HG in a flow injection mode were optimized - the concentration of hydrochloric acid, the concentration of sodium borohydride and the volume of the reaction coil. Subsequently, the atomization conditions were optimized using both atomizers. The parameters optimized were hydrogen fraction, total gas flow rate and observation height. Due to the more complicated construction of the FIGS atomizer, more parameters were studied, such as the oxygen flow rate through the capillary and the flow rate of shielding argon required for shielding the free atoms. A special part of the thesis dealt with the optimization of the optical path of the atomic fluorescence spectrometer, the selection of an interference filter and the optimization of a power supply of an electrodeless discharge lamp. It was found that under optimum conditions of generation, atomization and detection excellent detection limits...

The task of this diploma thesis was to investigate the influence of inorganic pigments on the identification of casein oil and animal glue tempera by mass spectrometry MALDI- -TOF MS (Matrix-Assisted Laser Desorption/Ionisation - Time of Flight Mass Spectrometry). First, it was necessary to prepare a set of model colour layers containing casein and animal glue tempera together with ten inorganic pigments. Consequently, the method of peptide mass fingerprinting was used to obtain mass spectra of the samples. Finally, it was possible to compare and determine the characteristic peptide fragments for both proteinaceous binders and find pigments that most affected the identification of casein and rabbit glue temperas. The obtained values of m/z casein oil tempera and animal glue tempera were used to improve and complete reference database of protein binders that is used to identify protein binders in works of art at the Institute of Chemical Technology in Prague.

in English β-N-Acetylhexosaminidase (EC 3.2.1.52) is exoglycosidase, which exhibits the unique properties in the filamentous fungi. Enzyme from these organisms are dimeric, inducible and secreted extracelluary. It is expresed as preproprotein, consists of a signal sequence, a large propeptid and a catalytic subunit. Although the enzyme is widely distributed, its structure differs in varies organisms. Bacteria have only monomeric hexosaminidase. Human enzymes are dimeric as well as fungal, but only hexosaminidase from filamentous fungi have the catalytic subunit noncovalently associated with the propeptide. Propeptide is a essential for the enzyme activity. It exists a homologues model of the catalytic subunit of β-N-acetylhexosaminidase from Penicillium oxalicum, but the structure of the propeptide has not yet been solved. The first part of this diploma thesis deals with the optimization of production and purification conditions. The second part deals with structural studies of β-N-acetylhexosaminidases from the filamentous fungi Penicillium oxalicum CCF 3438. These studies were carried out using chemical cross-linking and high resolution mass spectrometry. The combination of these methods revealed region of the noncovalent interaction of the catalytic subunit with the propeptide.

This thesis is focused on protective and antioxidant properties of bile pigment bilirubin. Bilirubin is a potent scavenger of free radicals and reactive oxygen species generated by increased oxidative stress. Mildly elevated systemic levels of bilirubin are actually associated with lower incidence of oxidative stress-mediated diseases, such as cardiovascular disease, atherosclerosis, diabetes and certain types of cancer. The main aim of this thesis was to prepare bilirubin oxidation products in vitro, characterize their physical-chemical properties and thein determine biological impact.

Summary: Raman spectroscopy is a widely used method in geoscience fields. Using a portable Raman spectrometer is possible to identify different materials, Raman spectrometer will participate in the survey the Martian surface. Its use is widely applied in mineralogy. There was measured a set of dark, green and some bright minerals of different mineralogical system groups that have been assessed the applicability of the chosen detector excitation at 785 nm mainly off-road equipment. The obtained spectra were measured off-road equipment ahura at excitation 785 nm and laboratory equipment InVia Renishaw and there were used lasers at excitaion of 785 nm and 514 nm. It was set of these minerals: Prehnite, Sulphur, Tyrkenit (howlit), Pyroxene (diopside), Libethenite, Toutmaline (verdelite), Dioptas, Klinoklas, Langit, Jadeit, Pseudomalachit (ehlit), Actinolite, Epidote, Augite. Results are composed of field measurement device Ahura, with excitation 785 nm and laboratory apparatus Invite Renishaw excitations with 785 nm and 514 nm. Measured values are arranged in tables, where the measurements are compared with each other, including literature and reference graphically demonstrated in the form of spectra. Subsequently evaluated their measurability. Keywords: Raman spektroscopy, portable Raman spectrometer,...

The aim of this master's thesis has been to develop and optimize the method of UV- photochemical vapor generation of cadmium volatile compounds for atomic fluorescence spectrometry. Two configurations with different materials wrapped around the low-pressure mercury vapor lamp were tested. I experimentally determined optimal conditions for both systems; the optimalized parametres included selection of photochemical reagent and its concentration, flow rate of liquids and gases, and the lenghth of the reaction coil. After finding the optimal parametres I determined the figures of merit of the method. I found from the measured data that UV-photoreactor with the quartz capillary provided lower limits of detection and thus was more suitable for generation of cadmium volatile compounds. With this arrangement and using the ferrous sulphate heptahydrate as the chemical modifier I obtained limit of detection 2,0 µg·l-1 , limit of determination 7,0 µg·l-1 , linear dynamic rate LOD-50 µg·l-1 and repeatibility 0,35 %. I also carried out the interference study in my thesis and determined the generation effeciency of cadmium volatile compounds. The interference study shows the influence of mineral acids (HCl, H2SO4, HNO3), their salts (NaNO2, NaNO3) and transition metals (Co, Ni, Cu). Based on literature review I also...

In this diploma thesis, rubidium in plant material samples was determined by atomic absoption spectrometry. Determination of plant material rubidium was performed on two different atomic absorption spectrometers (GBC 933 AA and ContrAA 700) for comparison. The selection of a proper method of atomization was essential, therefore optimizations for the flame atomizer and electrothermal atomizer were performed. On the GBC 933 AA, flame atomization was tested. The flow rate of the acetylene-air, vertical and horizontal flame profile, spectral interval width was optimized for the instrument. On the ContrAA 700, the conditions for flame atomization were optimized as well as for electrothermal atomization. The optimized parameters included the acetylene-air flow rate and the vertical flame profile again. For the electrothermal atomization, the temperature dependence of pyrolysis and the temperature dependence of atomization were optimized. Under experimentally determined optimal conditions, the determination of rubidium in fruit and vegetable juice samples was performed by the method of calibration curve. Rubidium usually accompanies toher alkali metals. In the absence of essential biogenic elements iportant for plant growth, rubidium is able to help out and take on the role of potassium.

Cancers represent a group of unprecedented heterogeneous diseases and currently available anti-cancer therapies provide highly variable efficacy with unsatisfactory cure rates. A wide range of proteomic technologies are being used in quest for newer approaches which could significantly contribute to the discovery and development of selective and specific cancer biomarkers for monitoring the disease state and anti-cancer therapy success. Taking into consideration the above aspects, this research was undertaken to study cancer cell proteomes and their changes after anti-cancer treatment with specific focus on: (a) response to conventional anthracycline/anthracenedione drugs with respect to their different clinical efficacy and (b) identification of novel targets for therapy in cancer cells resistant to biological drugs such as inhibitors of (b1) cyclin-dependent kinases and (b2) Aurora kinases. This study identified several interesting key aspects related to the effects of daunorubicin, doxorubicin and mitoxantrone. With the main focus on early time intervals when the influence of apoptosis is minimised, changes common for all three drugs belonging mainly to metabolic and cellular processes were observed. More importantly, significant changes in proteins involved in the generation of precursor...