The main aim of this master´s thesis is design and Cheb load-carrying steel structure of railway station in two variatons. A given object is situated in Ústí nad Orlicí.The steel structure is created by central nave, his dimensions is 30,0 x 30,0 m, and two secondary naves and his dimensions is 18,0 x 18,0 m.The central nave is two-storey height 12,4 m and secondary nave is single-storey height 5,5 m. Carrying building systém is created croos-column links, which are composed pipes. Cross-links are saved on fixed columns. The calculation was done through the use of Scia Engineer 2008 program and by myself alone.

Objective of the work is desingning the steel structure of multipurpose shopping centre. Structure is in two sections, structure A has two floors and structure B is ground floor. The main bearing components are the traversal restrained columns and the strut-frame stringers and traverse frames. Frame stringers are after the the axial distance 15 m. Ceiling are designed as a composite. The purlins are plate and trusses. The structure is desingned for the distrikt of east Morava.

The topic of my master's thesis is a concept and evaluation of a new steel construction of a foot bridge for pedestrians and cycles across the river Morava. The concept has two alternatives. Option 1: The foot bridge has three spans. The span lengths are 27+81+27m, the middle span is stiffened by an arc. There is a bridge deck that consists of a cellular beam which is locked onto the arc. The bridge deck is lower, steel and orthotropic. The arrangement of rods is radial. Option 2: The middle span is stiffened by two arcs bowed to each other. The bridge deck consists of two beams with crossbeams and is locked onto the arcs. The bridge deck is again lower, steel and orthotropic. The arrangement of rods is radial. The wind bracing has a shape of a Vierendeel beam.

The subject of this thesis was to develop a conversion and a variant of the existing steel structure roofing ice rink in Třinec. The building has a rectangular plan on pages 90 m x 60 m, minimum headroom inside the building is given with regard to the requirements of operation. The roof structure is stored in steel and concrete columns around the perimeter at a distance of 7.5 m. Variant solution for the design of new steel roof structure was chosen arc grate. The design consists of 13 main arc lattice girders in the transverse direction for a distance of 7.5 m in the longitudinal direction of the structure consisting of planar lattice strips (girders) and purlins. All this is complemented by a reinforced system. Two dimensions are retained.

This thesis concerns preparation and organization of an additional building to an industrial hall belonging to SAND TEAM company in Holubice which specialises in material forming research.Thesis focusses on technological realization plan of the building object.Description of other construction objects is included.

This thesis deals with the preparation and organization of construction of Logistic center of waste for processing biologically decomposable waste in Vsetín. It is focused mostly on technological procedure of realization of main building object, based on the budget, the progress chart, the technological instructions and the inspecting and test plan. The thesis also contains a description of other objels with time and financial planning. It is designed and described the construction site equipment, the composition of machinery for construction and the design of the supply of material resources.

The thesis project is a two-storey motorshow in Ostrava Poruba. It is a detached building with a second floor just above the ground brick part of the ground floor . The building is designed for sales and service of car . In front of the first floor is a shop with WC intended for the customers. Behind this section is on the first floor the facilities for employees , WC , kitchen, two showers and changing rooms . There is also a quick intake for 2 cars. On the second floor are located the office with separate WC . For this part of the building is the last part of a car dealership and service. Here you will find desktop with three separate workning places , part intended for minor repairs , drive trough car wash , paint shop , utility room and a spare parts warehouse . The structural system of the building consists of a steel construction with reinforcing brick core . The cladding of first floor consists from infill brickwork Heluz 20 with contact insulation system . The cladding of second floor from bearing brickwork Heluz P15 30 with a contact insulation system . The construction of the roof deck consists of single-layer straight roof . The supporting structure is made of concrete slab concreting trapezoidal sheet metal deposited on steel lattice girders. The roof deck is insulated with polystyrene EPS 150S . The waterproofing layer is made of two layers of modified bitumen sheet with reinforcements.

The subject of this diploma thesis is the architectural design of the New synagogue in Brno. The aim of this study is to create the closed a closed complex of buildings, which will be used by the Jewish religious communities and their members. Therefore, a building program is designed individually, according to the preferences and needs of the target group. The new building is located in Brno-Trnitá. At present, a new Jewish community center with a new synagogue in his heart is under development. The center is intended for all age groups. Besides the New synagogue, the area will contain a museum, kosher restaurants and administrative center. The administrative building of the Jewish community center is composed of a multi-purpose hall, a Jewis library, offices and a mikveh. Design of adjacent buildings and planned housing development is part of the presented urban design.

Item of diploma thesis is project of steel construction with 6 steel silos for storage the grain. The construction is situated inside hall. Silos are high 24 meter and diameter is 6 meter. The load-bearing steel structure for silos is designed in a variant solution. Silos are assessed by ČSN 73 5570 and ČSN EN 1991-4

This master’s thesis deals with the construction of parts of a bucket-wheel stacker/reclaimer designed to operate lignite stockyard at coal power plant. First the basic parameters of machine and loads applied in service are defined. The work also includes the design of steel structure of bucket-wheel boom, bucket-wheel, buckets, bucket-wheel drive, shaft, bearings and other parts of bucket-wheel boom. These parts are verified by analytical or finite element analysis.