This diploma thesis is deals with design of steel structure of a shopping centre. The object is situated in the Ostrava and has a rectangular and semicircle ground plan. The total ground plan dimensions are 72,5 x 55,0 m. The maximum height of a building is 18,75 m. The object has three storeys above ground. The material of main construction is steel grade S235. The ceilings are constructed from a steel-concrete beams. The roof above central part of the object has shape of a circular arch; above the other part of the building is a pitched roof. The design of main structures was made for two variants. The design of connections, anchorage and drawing documentation were made for the preferable variant.

The master thesis contains a construction and technology project of reconstruction of the textile factory nearby Jihlava. The technical report provides all the basic information about the construction to this project. Assembly of steel structure and demolition works are detailed processing in the technological regulations. Other documents are processed for these selected technological regulations which are needed for their implementation – ie. control and test plans, drawings of building equipment, draft of machinery and plans of health and safety and fire prevention. Time and financial plans are also component of this project. Another annex of this thesis is budget for a major building and selected structural details.

This diploma thesis is engaged by analyses of steel structure. Structure was modelled in two variants, in software ANSYS Mechanical. Both models were at first counted by linear analyses, then they were counted by non-linear analyses. At the end models were counted by modal analyses. Aim of the study was evaluated and decide, which one of variant is structurally and economically most competently. Selected model was assessed on ultimate and serviceability limit state.

The thesis deals with the variant design of the steel structure of single-track railway bridge on the line Tišnov – Nové Město na Moravě. The task is bridging the local road by a bridge structure with one field. Length of the bridge is 40 m.

The subject of this diploma thesis is design and check the steel construction of the office building in Valašské Meziříčí. Floor plan dimensions of building are 55,0 x 30,0 m. The length of building gradually increases with each floor. The building has eight floors. Overall height is 33,6 m. The building ceilings made of composite steel and concrete structure. The construction in both directions is stabilized by vertical bracings. The building adjoins a smaller building with shops. Floor plan dimensions of that building are 31,5 x 21,0 m and building height to the top of the truss girder including cladding is 17,5 m.

The object of this thesis is to design and assess steel structure of multi-storey office center in Nový Jičín. The object is supposed to have an rectangular shape with dimensions 54 x 72 m and roofed atrium in the middle. The object has 6 overground floors. Roof height is 29 m. Two construction variants were designed and assessed. Longitudinal and transverse rigity of variant A is ensured by truss bracings and variant B is braced by bracing frames. Floor structurs of both variants are made of steel secondary and primary beams, which are supported by steel columns. Facade and atrium roof cladding is made of glass panels.

The subject of this thesis is the proposal of main supporting steel structure of multipurpose sports hall with the floor plan dimensions of 36x45 meters. Location of the building is in Znojmo. Total height of the structure is 16 meters. The support structure material is 235 JR. Construction is drafted in three possible options. For the selected option is elaborated project documentation and calculated guide details.

The final thesis is focused on a project of a load bearing structure of a aircraft maintenance hangar that has a rectangular ground plan 60,0x120,0 m and includes suspended mobile hoist of loading capacity 5,0t. The object is situated in the airport area of Ostrava Mošnov. The task provides two versions of design. The first version consists of eleven traverse joining beams witch are distanced twelve meters from each other. The second version consists of thirteen traverse joining beams witch are distanced ten meters from each other. The thesis focuses on the load pressure of the steel construction, the main emphasis being placed on the single structural components and assembling components. The calculation meet the standards of ČSN EN.

The subject of master’s thesis is a structural analysis of a bearing structure of an existing historical single-track railway bridge over the Vltava river in a direction from Prague Modřany to Vrané nad Vltavou. The riveted steel bridge carries rail traffic across five fields. A part of the master’s thesis is focused on a disposal of a variant of the longest field by using a modern arch construction.

Master´s thesis describes the structural design of the load bearing steel structure of exhibition hall located in Brněnské Výstaviště. The structure is designed according to the normative requirements of ČSN EN for ultimate and serviceability limit state. It´s structure formed by the parabolic main frames at a distance of 6 m apart, which are placed in a rectangular plan of 36 x 36 m. As the main material of load bearing elements was used a steel S355. The hall is designed for exhibitions and social occasions. The work contains a statical calculation, which assessed individual cross sections and joins.