Thesis (M.S. in Historic Preservation)--University of Texas at Austin, 2004. / Title from PDF title page (University of Texas Digital Repository, viewed on Oct. 28, 2009). Vita. Includes bibliographical references.

Not available / text

This study evaluates the relationship of the Civilian Conservation Corps' stonework in Indiana's state parks and the National Park Service's design guidelines for stone landscape features. The design guidelines were instrumental in establishing an overall design approach for many of the stone structures evaluated in this study. A general history of the Civilian Conservation Corp program provides the context for the program as well as the relationship to stonework in Indiana's state parks. Through a sampling of stone landscape features in six Indiana state parks it can be concluded that the Civilian Conservation Corps were impacted by the National Park Service's design guidelines. At the same time the Civilian Conservation Corps deviated from the guidelines and improvised with their own variation. / Department of Architecture

A dissertation submitted to the Faculty of Science, University of the Witwatersrand, in fulfilment of the requirements for the degree of Master of Science Johannesburg 2017. / Pre-colonial Stone Walled Structures (SWS) in southern Africa have been studied since the 17th Century. Studies focused on establishing the origins of SWS, classification and other socio-economic components associated with these settlements. The physical environment played a significant role in shaping these communities, therefore making it important to establish the correlation between these pre-colonial cultures and the physical environment. Using Google Earth and GIS Sadr and Rodier (2012) undertook a settlement analysis of a 350 area near the Suikerbosrand nature reserve in southern Gauteng. They observed that settlement patterns revealed a shift from small and dispersed egalitarian societies to more stratified communities between the 15th and 19th century. Using the same techniques that Sadr and Rodier (2012) employed, a settlement pattern analysis was conducted on the rest of the research area in southern Gauteng which is slightly under 9000. Results from an exploratory and a statistical analysis from the research area revealed observations made by Sadr and Rodier 2012 from a 350 concur with the observations made from the rest of the study area. / LG2018

Detta arbete redogör för hur användning av den nya nationella höjdmodellen (NNH) ur/i Lantmäteriet databas kan användas i olika terräng och vilka förutsättningar det finns för identifiering av specifika landskapselement i denna, manuellt och visuellt. Sedan 2009 har Lantmäteriet laserskannat hela landet, både på land och över vatten. Uppdraget är slutfört 2015. Målet med laserskanning är att framställa en rikstäckande höjdmodell med ett medelfel som är bättre än 0.5 m. Idag är all NNH-data tillgänglig som LAS-filer på Lantmäteriets databas. För att kunna utföra ett utvärderingsexperiment valdes ett geografiskt begränsat område: I Skepplanda, Ale kommun i Västra Götalands län. De hjälpmedel som användes var GPS-mottagare, LAS-filer, Ortofoto och applikationsprogram såsom OL-laser och ArcGis. Det främsta syftet med studien var att undersöka hur bearbetning och utvärdering av olika kartmaterial kan utföras, för att sedan kunna bedöma i vilken mån användning av Lantmäteriets NNH-data, i olika typer av terräng, kan vara möjlig t.ex. hur små detaljer kan urskiljas i det. För undersökningen valdes specifika objekt, såsom stenmurar och ett dike. Tre olika kartunderlag framtogs av OL-laserprogrammet: lutningsbilder, intensitetsbilder och terrängskuggningsbilder. Utifrån insamling av inmätta punkter och med hjälp av vektordata kunde materialet utvärderas visuellt. Två kartor valdes, vilka uppfyllde kriterierna för att kunna uppnå studiens syfte. Eftersom kartan med terrängskuggning och lutningsbild ger en tydligare profil av områdets karaktäristiska drag på marknivå, är det möjligt att identifiera små markdetaljer såsom stenmurar och diken. Resultatet varierade från fall till fall, beroende på kartunderlaget. En mur på den ena platsen i en bild kunde t.ex. detekteras, men inte i en annan bild, trots att det finns en mur där. Studien visade att laserpulserna har svårt att tränga igenom tät vegetation, dock kan olika solvinklar och belysningsriktningar ändå framhäva vissa små markdetaljer under en tätskog. Andra faktorer som kan ha påverkat kvalitén på lasermaterialet är flyghöjden, laserskannerns vinkel och under vilken period under året skanningen genomfördes. Ett antagande gjordes, att laserskanning från lägre flyghöjd och mindre öppningsvinkel kan höja kvalitén på laserdata. Med dessa två faktorer kan högre upplösning per kvadratmeter yta uppnås. Ett annat sätt som kan vara aktuellt i en undersökning är att använda OL-laser verktygslåda och tillämpa andra inställningar genom att skapa objekthöjdbilder där höjd färgläggs med olika ekvidansnivå. Genom att prova fram olika inställningar i programmet, där olika lutningshöjd och solvinklar tillämpas kan läsbarheten på kartunderlaget förbättras. / This work describes how the use of the new national elevation model (NNH) from the National Land Survey database may be used in a variety of terrain and the conditions they are identification of specific landscape elements, manually and visually. From the start of 2009, the national land Survey laserscannat whole country, both on land and over water. The mission will be completed in 2015. The goal of laser scanning is to produce a nationwide elevation model with a standard error of better than 0.5 m for a 2 m GRID. Today, all NNH data available as LAS files on Lantmäteriet's database. To perform an evaluation experiment was elected a geographically limited area: Skepplanda, Ale Municipality in Västra Götaland. The devices used were GPS receiver, LAS files, Orth imagery and application programs such as OL laser and ArcGIS. The main aim of the study was to investigate the processing and evaluation of different map material can be performed, and then to assess to what extent the use of Lantmäteriets NNH- data in different types of terrain may be possible. For the investigation, the specific items, such as stone walls and a ditch. Three different maps material was developed by the OL laser program: slope images, intensity images and terrain shading images. Based on the collection of measured points and using vector data could material evaluated visually. Two maps were chosen, which met the criteria for being able to achieve the objectives of the study. Since the map with terrain shading and gradient image provides a clearer profile of the area's characteristic features at ground level, it is possible to identify small land features such as stone walls and ditches. Results will vary from case to case, depending on the substrate maps. A wall at one location in an image could e.g. detect, but not in another image, even though it's a wall there. That’s why definitive conclusions could be not established. The study showed that the laser pulses are difficult to penetrate dense vegetation; however different solar angles and lighting directions nonetheless highlight some small land details during a dense forest. Other factor that may have affected the quality of the laser material is the altitude, laser scans angle and during which period of the year the scan was performed. An assumption was made that the laser scans from lower altitude and smaller opening angle can add value to laser data. With these two factors, higher resolution per square meter of surface is achieved. Another way that can be relevant in an investigation is to use the OL laser toolbox and apply different settings to create objects height pictures where height is colored with different evidence level. By trying out different settings in the program, where different slope height and solar angles applied to the readability of the chart surface is improved.

Thesis (M.Sc.)--University of the Witwatersrand, Faculty of Science, School of Geography, Archaeology and Environmental Studies, 2018. / There are thousands of Stone Walled Structures (SWS) located in the southern half of the Gauteng Province. In the absence of relevant historical documents, these SWS are all the information we have about how pre-colonial societies were organized in this area. Unfortunately, they are threatened by rapid urbanization and development. This research attempts to estimate how many Iron Age SWS have been lost to urban development in Johannesburg South during the last 80 years. I mapped and quantified the SWS and urbanization in four chronological snapshots using remote sensing techniques. Aerial photographs from 1937 and 1961 were used as well as Google Earth satellite images from 2005 and 2015. The data was analyzed on the ESRI software ArcGIS 10.3. The four snapshots show the trend in urban sprawl and destruction of SWS and this information is valuable for mitigation strategies. Fortunately, there are legislations and procedures in place to ensure that not all these sites are lost forever. / EM2018

Automated pattern recognition of stone walls, within both point cloud and image processing, can help identify previously inaccessible areas than with only image pro-cessing. This is important as stone walls are biotopes and serve as structures and have ecological functions for both plants and animals. An automated pattern recog-nition can also benefit Sweden with the fulfillment of the national environmental quality objectives, as well as several commitments from the EU which promote the preservation of biological diversity and cultural heritage. However, conventional airborne laser scanners, via airplanes, have not had a sufficiently high point density and penetration of dense forests. This study therefore aims to use an improved tech-nology in Light Detection and Ranging (LiDAR), where data is collected from Sin-gle Photon LiDAR (SPL). Then, the automated pattern recognition will be used to discover stone walls in varied terrain. After the evaluation, two out of five stone walls were identified, one of which had rendered 99.99% of the target area and the other had a 75% target area, although both also displayed one false hit outside of the desired area. The remaining missing area, as well as the other stone walls, could not be identified because of nearby fac-tors such as shrubbery and trees, but even though the method selection for this study did not provide a 100% match on all stone walls, the data from the SPL tech-nology is still useful for pattern recognition with its point density and penetration. The conclusion of this work is that a point cloud filtering must be improved, if not adapted for each area of stone walls, to create better areas of interest before image processing of segmentation and pattern recognition can be implemented. However, the study shows that a combination of point cloud and image processing for auto-matic pattern recognition is a useful way of identifying stone walls. / En automatiserad mönsterigenkänning av stenmurar, inom både punktmolns- och bildbehandling, kan bidra till att identifiera tidigare oåtkomliga områden än med endast bildbehandling. Detta är viktigt då stenmurar är biotoper och fungerar som strukturer och ekologiska funktioner för både växter och djur. En automatiserad mönsterigenkänning kan även bidra till att Sverige gynnar uppfyllandet av de nation-ella miljökvalitetsmålen, samt flera åtaganden från EU enklare inom bevarelse av den biologiska mångfalden och kulturarv. Däremot har konventionella flygburna la-serskanningar, med flygplan, inte haft en tillräcklig hög punkttäthet och genom-trängning av tät skog. Denna studie syftar därför till att använda sig av en förbättrad teknik inom Light Detection and Ranging (LiDAR), där data är insamlat från Single Photon LiDAR (SPL). Därefter ska den automatiserade mönsterigenkänningen an-vändas på dess data för att identifiera stenmurar i varierad terräng. Efter utvärderingen identifierades två av fem stenmurar, varav den ena muren hade 99,99 % upphittad träffyta med en felträff och den andra muren hade en 75 % upp-hittad träffyta med en felträff. Resterande saknad träffyta, samt de övriga stenmu-rarna, kunde inte identifieras på grund av närliggande faktorer som buskage och träd, men även om metodvalet till den här studien inte gav en 100 % träffyta på alla samtliga stenmurar är data från SPL-tekniken fortfarande användbart för mönsteri-genkänning med dess punkttäthet och genomträngning. Slutsatsen av detta arbete är att en punktmolnsfiltreringen måste förbättras, om inte anpassas för varje område av stenmurar, för att på så sätt skapa bättre intresseområden av stenmurar innan bildbe-handling av segmentering och mönsterigenkänning kan implementeras. Däremot vi-sar studien att en kombination av punktmolns- och bildbehandling för automatisk mönsterigenkänning är ett användbart arbetssätt för identifiering av stenmurar.

<p>Following paper deals with the questions about prehistorian and medieval settlements in the Mälar Valley and their relations to the historically known hamlets or single farmsteads from the 17^th- and 18^th-century cadastral maps. Models over settlement development through the period A.D 200 to 1700 done by geographers Ulf Sporrong and Dan Carlsson are tested and compared to the knowledge won by recent archaeological excavations. Is there a connection between the older settlements linked together by dry-stone walls and the late Iron Age settlements? Does the picture differ from the one presented for the Gotland region? How well are the general theories about different settlement development depending on basic natural conditions as for the potentials for cultivation and topography, corresponding to the physical remains?  Are there other factors involved when the settlement structure takes its form?</p><p>The methods that are used here constitutes mainly of a comparison between different locations in the Mälar Valley that has got a well known prehistory thanks to extensive archaeological excavations. Cadastral maps, soilmaps, topography maps and maps over ancient monuments are intertwined to the same map and analyzed through works in Geographical information systems.</p><p>The results of this study reveal an interesting suspicion in the continuity-question through the Iron Age. Certain settlements seem to be more stable than what was earlier assumed in the general models. This occurrence of continuous use of sites must also be seen in a spatial context and not only a pattern formed by randomly chosen locations. The research has shown that it may be connected to the local political power in the Iron Age community. Related to this are also the different settlement forms where more than one unit occurs on a site. Concerning the different natural landscapes both disparities and similarities are found when it comes to the development that precedes the given situation on the cadastral maps. The conclusion is that the recent archaeological excavations definitely have shown us a more complex situation than what was once outlined in the early years of landscape archaeology.</p>

Following paper deals with the questions about prehistorian and medieval settlements in the Mälar Valley and their relations to the historically known hamlets or single farmsteads from the 17th- and 18th-century cadastral maps. Models over settlement development through the period A.D 200 to 1700 done by geographers Ulf Sporrong and Dan Carlsson are tested and compared to the knowledge won by recent archaeological excavations. Is there a connection between the older settlements linked together by dry-stone walls and the late Iron Age settlements? Does the picture differ from the one presented for the Gotland region? How well are the general theories about different settlement development depending on basic natural conditions as for the potentials for cultivation and topography, corresponding to the physical remains?  Are there other factors involved when the settlement structure takes its form? The methods that are used here constitutes mainly of a comparison between different locations in the Mälar Valley that has got a well known prehistory thanks to extensive archaeological excavations. Cadastral maps, soilmaps, topography maps and maps over ancient monuments are intertwined to the same map and analyzed through works in Geographical information systems. The results of this study reveal an interesting suspicion in the continuity-question through the Iron Age. Certain settlements seem to be more stable than what was earlier assumed in the general models. This occurrence of continuous use of sites must also be seen in a spatial context and not only a pattern formed by randomly chosen locations. The research has shown that it may be connected to the local political power in the Iron Age community. Related to this are also the different settlement forms where more than one unit occurs on a site. Concerning the different natural landscapes both disparities and similarities are found when it comes to the development that precedes the given situation on the cadastral maps. The conclusion is that the recent archaeological excavations definitely have shown us a more complex situation than what was once outlined in the early years of landscape archaeology.