The thesis aims to project documentation stage for the execution of the project. It is an object of school for first and second grade. Documentation is prepared on the basis provided architectural studies. The building is situated on the flat, gently sloping land. The work consists of drawing and text documentation, evaluation of thermal, structural and acoustic and lighting requirements for construction, fire safety design of the building. The work includes specialized project on HVAC - heating namely, draft power and boiler room layout and design of concrete structures specialized namely design and dimensioning of cross continuous reinforced slab.

Brno Lesna is ranked among the most highly regarded housing estates in Czechoslovakia ever since it was built in the 1960s. Mainly due to its ideal location at southern slopes around natural ravine and timeless urban design. This settlement at the time also constituted the most perfect realization of the current method of construction in our country. It was fully functional and completely finished even before first residents moved in. However, cultivated expression of housing architecture was recently severely affected by inappropriate revitalization. Change of ownership after the events of November 1989 also opened the way for development companies desiring to open spaces to build new apartment buildings. Original inhabitants, though, fight against it and seek for protection of whole settlement as heritage.

This diploma thesis deals with the processing of project documentation of student housing in the city of Olomouc. The building is located near the university dormitory accommodation of Palacky University. It is designed to complement the missing type of accommodation. Building is a L-shaped five-storey, without a basement and with a flat roof. Structural system is mostly brick, only part of first floor is solved by columns. The building is divided into three building complexes. Two wings for the accommodation have 4 floors. The connector block has five floors, where the 5th floor is only the engine room. Foundation structures are concrete strips and foundation pads. South side of the building is protected from the sun by sunscreens, on which in a future could be installed photovoltaics. The building is divided into three parts in terms of functionality. 1.NP consists of commercial premises in the southern block and private rooms for accommodated in the eastern block. 2nd-4th floor forms spaces designed to accommodate students. Accommodation capacity is 105 people.

The aim of my diploma thesis is to elaborate project documentation for the execution of a new building home for elderly people. The intention is to construct a new apartment building for pensioners who are able to do activities of daily living. There can be found 24 lease flats for a maximum of 30 accommodated people. The home offers 12 hours care service and has rooms for carers, dining rooms, places for rehabilitation, outpatient care and stores for keeping accommodated people’s things. The whole area has wheelchair access and counts with the movement of people with reduced mobility. The building is designed as brick, using clay blocks which are put on concrete foundation strips. Thermal insulation is a combination of contact thermal insulation system and ventilated facade with hanging plates. The roofing is designed partly as a float double-shell roof with timber truss girder, and partly as a single-shell roof with concrete load-bearing structure. The drawing documentation has been created using computer programs AutoCAD, ArchiCAD, and the programs by doc. Dr. Ing. Zbyněk Svoboda (Teplo, Area, Stabilita, Simulace) and another simple computer programs like Excel were used for the thermal assessment.

The aim of master‘s thesis is to renovate old agricultural building and design it as nzeb building. The thesis contains three parts: 1st – design of the building, 2nd – design of building services, and 3rd – assessment of the impact of different operations in building on energy consumption. The results are then evaluated for economic and environmental savings. The renovated building in village Rozkoš will be used for many purposes. It will be divided into 3 parts – a multifunctional hall, a pub, and a club room. Multifunctional hall will be used for various activities for village itself or public. In the pub will be only cold kitchen with small dishes and beverages. Club room can be used for elderly people, workout or young people. The building is low rise and structural system is combined. The vertical load-bearing walls and columns are built of bricks. Horizontal load-bearing structures are cross vaults made also of bricks. Saddle roof is made of timber roof truss. The building site contains also an outdoor car park and a garden. The project was carried out in the Revit.

The aim of this master project is to design a nearly zero-energy building of kindergarten. The kindergarten is designed as one storey building with capacity of 40 children split into two playrooms. Playrooms are separated and each of them has own sanitary facilities and locker room. Playrooms have large windows with external blinds on the south to provide solar gains. There is horizontal sun breaker above the windows which prevent overheating in summer. Load bearing walls are made of sand lime blocks. Walls are insulated with mineral wool board. Roof ceiling is made of prestressed concrete slabs. The building has a flat extensive green roof. The second task of the project includes design of lighting, rainwater harvesting, HVAC, source of heat and photovoltaic system. The third part is theoretical and includes searching for an ideal source of energy for the building. There are two types of heating compared such as gas boiler and a groundwater heating pump. The main software used for the project is Revit.

The aim of this master project is to design a nzeb kindergarten and primary school in Škrdlovice. The building has three parts: kindergarten and primary school with 2 above–ground floors and basements are connected with a single canteen. The canteen has a flat extensive green roof, while the kindergarten and primary school have saddle roof. The kindergarten has two identical floors with playrooms, locker rooms, bed and toy storage, teacher’s office, and bathrooms. First floor of the primary school contains locker room, teacher’s’ offices, it classroom, afterschool centre, and toilets. Three classrooms, headmaster’s office, and toilets are in the second floor. The building is designed using Xella building system. The external load–bearing walls, slabs, and internal non–bearing walls are made of aerated concrete blocks. The internal load–bearing are made of lime–sand blocks. The building is insulated with non–fibrous mineral panels. The project includes design of lightning, HVAC, DHW, and photovoltaics systems. The project also includes a study of three structural details including 3D models in BIM software and their thermal assessment. The project was designed using BIM software Revit.

The subject of this thesis is the design and project documentation of a new multifunctional house in Strakonice. The building has four floors, without basement, and is located on a slightly sloping land in the suburban part of the town of Strakonice. It is based on shallow foundations and covered with a flat roof. It is a transverse wall structural system, build with clay block masonry, with the semi-assembled ceiling structures of ceramic and concrete beams and inserts. It is conceived as a double-aisle layout. The ground floor of each wing consists of the establishment of shops and house facilities. The overground floors are designed as six residential units of varying size category. Both tracts have separate entrances to both the residential portion and to individual businesses. The building is designed from traditional building materials. In addition to the architectural construction and civil-engineering design, a part of this project is also a fire safety design and an assessment from the perspective of building physics.