Spelling suggestions: "subject:"3structure characterisation"" "subject:"bstructure characterisation""
1 |
Characterisation of granule structure and strength made in a high shear granulatorRahmanian, Nejat, Ghadiri, M., Jia, X., Stepanek, F. January 2009 (has links)
No / Results of a study of the influence of impeller speed on the strength, structure and morphology of granules produced in a type of high shear mixer granulators are reported. Calcium carbonate particles (Durcal 65) have been granulated in a Cyclomix with a capacity of 5 L. An aqueous solution of polyethylene glycol was used as the binder. The granules produced have been dried and their structure visualized using X-ray micro-tomography equipment, Nanotom, with a resolution of less than 1 μm. It is shown that the operation of the granulator at high impeller tip speeds produces granules with a higher strength and lower porosity than those produced at medium and low impeller speeds. Two different granule micro-structures and morphologies are produced at high and low impeller speeds. Structure descriptors such as phase volume fraction (as representative of porosity), chord length distribution and auto-correlation function (as indices of homogeneity of structure) are used to quantify the internal structure of granules in 3D, which in turn affects the granule strength.
|
2 |
Seeded granulationRahmanian, Nejat, Ghadiri, M., Jia, X. January 2011 (has links)
No / A novel method for manufacturing granules with a large particle at their core, referred to as seeded granules, is presented. As an example, calcium carbonate powders (Durcal) of different grades are used as primary particles and polyethylene glycol (PEG) as liquid binder in high shear granulators of different scales (Cyclomix, manufactured by Hosokawa Micron B.V., The Netherlands). The conditions giving rise to seeded granulations are specified in the form of an operational regime map. It is found that the seeded structure is strongly dependent on the impeller speed and the primary particles size distribution. It is shown that a Stokes number of around 0.1 represents the optimal dynamic conditions in the given example for producing seeded granules, regardless of the scale of the granulator.
|
3 |
Biološka aktivnost novosintetisanih D-seko i D-homo-estratrienskih derivata u in vivo i in vitro uslovima / Biological activity of the newly synthesized D-secoand D-homoestratriene derivatives in in vivo and in vitro experimentsJovanović-Šanta Suzana 08 October 2010 (has links)
<p>Sintetisana su nova jedinjenja, 16- i 17-supstituisani 16,17-sekoestratrienski derivati i D-homoestranski derivati, polazeći od 3-benziloksi-17-hidroksi-16,17-sekoestra-1,3,5(10)-trien-16-nitrila. Ispitana je estrogena i antiestrogena aktivnost u eksperimentima <em>in vivo</em>, antiaromatazna aktivnost <em>in vitro</em>, antioksidantna aktivnost DPPH i TBA testom, kao i antiproliferativna aktivnost prema ćelijskim linijama MCF-7 ATCC, MDA-MB-231, HT-29 i MRC-5 novosintetisanih jedinjenja.</p> / <p>Some new compounds, 16- and 17-substituted 16,17-secoestratriene derivatives, as well as D-homoestratriene derivatives, were synthesized, starting from 3-benzyloxy-17-hydroxy-16,17-secoestra-1,3,5 (10)-triene-16-nitrile. The newly synthesized compounds were tested for their <em>in vivo </em>estrogenic and antiestrogenic activity, <em>in vitro </em>antiaromatase activity, antioxidative activity by DPPH and TBA tests, as well as antiproliferative activity against MCF-7 ATCC, MDA-MB-231, HT-29 i MRC-5 cell lines.</p>
|
Page generated in 0.0993 seconds