Spelling suggestions: "subject:"strut"" "subject:"trut""
111 |
Textilbewehrter Beton als TorsionsverstärkungSchladitz, Frank, Curbach, Manfred 03 June 2009 (has links) (PDF)
Anhand von Versuchsergebnissen wird gezeigt, dass Stahlbetonbauteile mit textilbewehrtem Beton verstärkt werden können. Sowohl die Torsionstragfähigkeit als auch die Gebrauchstauglichkeit werden durch die textilbewehrte Verstärkungsschicht deutlich verbessert. Vergleichsrechnungen zeigen, dass die Torsionstragfähigkeit mit bereits bekannten Stabwerksmodellen ermittelt werden kann.
|
112 |
Using the FRDPARRC design methodology to drive innovation in the HETDEX PFIP support adjustable strut assemblyMolina, Homar 16 February 2011 (has links)
This thesis provides background information on the Hobby-Eberly Telescope (HET), HET Dark Energy Experiment (HETDEX), Gough-Stewart platforms (GSP), the Prime Focus Instrument Package (PFIP) support structure, and the design methodology used to design said support structure. Each component is analyzed from the point of view of Professor Alex Slocum’s FRDPARRC design methodology. Each aspect of the design is shown to have been derived by following the steps of Slocum’s design method. Material selection, manufacturing techniques, and integration of off-the-shelf components into the support system are also discussed in reference to FRDPARRC. The assembly procedure for the PFIP structure is outlined. Finally, using specific examples from the detailed design, the FRDPARRC method itself is analyzed and its ability to drive innovation in design is evaluated. / text
|
113 |
Die Wirkung von Tinospora cordifolia, 20-Hydroxyecdyson und STX im Vergleich zu 17β-Östradiol in der Tibia ovarektomierter Sprague-Dawley-Ratten als mögliche Therapie der postmenopausalen Osteoporose der Frau / The effect of Tinospora cordifolia, 20-hydroxyecdysone and STX compared to 17β-estradiol in the tibia ovariectomized Sprague-Dawley rats as a possible treatment of postmenopausal osteoporosis in womenSteinmark, Maria 22 May 2013 (has links)
No description available.
|
114 |
Análise de blocos de concreto armado sobre estacas / Analysis of blocks of reinforced concrete pilesSAKAI, Erika 16 December 2010 (has links)
Made available in DSpace on 2014-07-29T15:18:23Z (GMT). No. of bitstreams: 1
ErikaSakai.pdf: 1917728 bytes, checksum: 5cc92bff51598c6d8147b5abba80383d (MD5)
Previous issue date: 2010-12-16 / Through studies on the choice of type of foundation to use a certain work, always when the
foundation is to pile it is necessary to build another structural element, the block of crowing or
also called pile caps. Several studies have been made taking into account the block on stilts
without the influence of soil. So this work demonstrates the relationship of methods of
calculation of reactions in piles and tensions in chunks of some authors that take into account
the influence of soil or not, with the numerical analysis. To analyzethe fundations the program
DIANA was used in conjunction with MIDAS / FX +. With these results, ground-structure in
the study of these blocks can be concluded on the importance of the interaction, being
distinguished that as example, that if the ground are taken in consideration in the analyses of
rigid blocks, the biggest reactions if are concentrate near the corners of the block, independent
of the type of load application studied and not in the props central offices as some simplified
methods consider. This leads to a closer examination of reality and therefore more accurate. / Através de estudos sobre a escolha do tipo de fundação a usar numa determinada obra, sempre
quando a fundação for com estaca faz-se necessário a construção de outro elemento estrutural,
o bloco de coroamento ou também denominado bloco sobre estacas. Vários estudos foram
feitos levando-se em consideração o bloco sobre estacas sem a influência do solo. Portanto
este trabalho demonstra a relação de métodos de cálculos de reações nas estacas e tensões nos
blocos de estacas envolvidas pelo solo, através de análise numérica baseado no Método dos
Elementos finitos, com características tridimensionais e não-lineares. Para a análise foi usado
o programa DIANA em conjunto com o MIDAS/FX+. Com os resultados obtidos, pode-se
concluir sobre a importância da interação solo estrutura no estudo destes blocos, destacandose
que como exemplo, que se o solo é levado em consideração nas análises de blocos rígidos,
as maiores reações se concentram nas estacas laterais do bloco, independente do tipo de
aplicação de carga estudada e não nas estacas centrais como alguns métodos simplificados
propõem. Isto leva a uma análise mais próxima da realidade e, consequentemente, mais
preciso.
|
115 |
Zesílení nosných částí výrobní haly / Strenghtening of the load bearing parts of the production hallČížová, Kateřina January 2018 (has links)
The diploma thesis deals with the strenghtening of the supporting parts of the production hall in Drásov. In the first part the existing load bearing capacity of the structure is solved. The next step is to design of strenghtening variants for nonconforming columns and short corbel. Columns and short corbel are strenghtening with monostrand. At the end of the thesis, verification of the load bearing capacity of the strenghtening structure is performed.
|
116 |
STUDY OF ENERGY ABSORPTION IN MICRO – STRUT LATTICE STRUCTURE PRODUCED BY SELECTIVE LASER MELTING / STUDY OF ENERGY ABSORPTION IN MICRO – STRUT LATTICE STRUCTURE PRODUCED BY SELECTIVE LASER MELTINGVrána, Radek January 2019 (has links)
Předložená dizertační práce je součástí většího výzkumného projektu, který si klade za cíl využití mikro prutové konstrukce vyrobené technologií SLM jako absorbér rázové energie s přesně navrženými vlastnostmi. Hlavním cílem práce je vývoj numerického modelu deformačního chování mikro-prutové konstrukce vyrobeného technologií Selective Laser Melting (SLM) z materiálu AlSi10Mg. Aby bylo možné dosáhnout hlavního cíle dizertační práce, bylo nutné analyzovat vliv procesních parametrů technologie SLM na tvorbu vnitřních materiálových vad a drsnost povrchu při výrobě mikro-prutové konstrukce. Tyto imperfekce degradují její mechanické vlastnosti a jejich odstranění zlepší možnosti a přesnost numerické predikce. Výsledky ukazují významný vliv dvou hlavních parametrů – skenovací rychlosti laseru a výkonu laseru. Na základě těchto poznatků byly dále definovány parametry vstupní energie Ein a lineární energie Elin, které zahrnují oba zmíněné parametry a byly definovány jejich limitní hodnoty pro minimalizaci vzniklých imperfekcí. Deformační chování vyrobené mikro-prutové konstrukce bylo analyzováno na navrženém pádové zařízení, které umožňuje testování s dopadovou energií až 120 J. Deformační chování je vyhodnocováno s využitím obrazové analýzy záznamu vysoko rychlostní kamery a silového průběhu z tenzometru. Výsledky analýzy byly využity pro validaci numerického modelu v programu ANSYS Explicit, do kterého byly implementovány poznatky o reálném tvaru vyrobeného mikro-prutového materiálu ve formě eliptického modelu geometrie a informace o reálných mechanických vlastnostech ve formě vyvinutého materiálového modelu. Výsledné porovnání výsledků experimentu s predikcí numerického modelu ukazují dobrou shodu v místě maximálního zatížení Fmax (odchylka 5 %) i průběhu celé deformace vzorku. Tyto poznatky budou v budoucnu využity při návrhu absorbéru energie s definovanými mechanickými vlastnostmi.
|
117 |
Vyšetřování bezpečného únavového života křídla víceúčelového jednomotorového turbovrtulového letounu / Wing fatigue safe life investigation of single-engine multipurpose aircraftHubáček, Jan January 2021 (has links)
Práce se zabývá stanovením bezpečné únavové životnosti křídla. Letadlo, které bylo podrobeno analýze, je vzpěrový hornoplošník celokovové konstrukce. Letadlo je certifikováno na základě předpisu FAR 23 Amendment 23-46. Výpočet bezpečné únavové životnosti musí být proveden v souladu s požadavky předpisu FAR 23 a jeho poradními oběžníky.\\ Teoretická část práce je věnována hlavně přehledu literatury a představení projektu, kde byla stručně shrnuta jeho historie vzniku. Část přehledu projektu také pojednává o podstatě požadavku na posouzení bezpečné únavové životnosti zadavatelem. V další části byl rovněž proveden rozbor literatury týkající se únavy. Jednalo se zejména o rozbor předpisu FAR 23, jeho poradních oběžníků a obecně literatury vztahující se k únavě jak v letectví, tak v obecném strojírenství.\\ Druhá část diplomové práce byla zaměřena zejména na výpočetní analýzu a vývoj specializovaného software. Výpočetní část obsahovala zejména přípravu vstupů, včetně obálek zatížení, stanovení typického letu, výpočet zatížení křídla a napjatostní analýza ve vybraných řezech křídla. Z výstupů prvotní analýzy se následně provedl výpočet poškození a životnosti pro daný typový let.
|
118 |
Dvorní vícepodlažní přístavba výukových prostor / Court multi-storey outbuilding university spaceRochová, Lucie January 2016 (has links)
The topic of the diploma thesis is the design of monolithic concrete structure CERIT in Brno. There are designed three preliminary variants of the concrete structure for the problematic place in the building. Selected variant is developed in detail design (the concrete wall). The solution comprises statical analysis, text section and drawing documentation.
|
119 |
Textilbewehrter Beton als TorsionsverstärkungSchladitz, Frank, Curbach, Manfred 03 June 2009 (has links)
Anhand von Versuchsergebnissen wird gezeigt, dass Stahlbetonbauteile mit textilbewehrtem Beton verstärkt werden können. Sowohl die Torsionstragfähigkeit als auch die Gebrauchstauglichkeit werden durch die textilbewehrte Verstärkungsschicht deutlich verbessert. Vergleichsrechnungen zeigen, dass die Torsionstragfähigkeit mit bereits bekannten Stabwerksmodellen ermittelt werden kann.
|
120 |
Coffee and Conflict: Veteran Antiwar Activity and G.I. Coffeehouses in the Vietnam EraWalls, Harley Elisabeth Noelle 25 April 2022 (has links)
No description available.
|
Page generated in 0.0279 seconds