Spelling suggestions: "subject:"submicron integratedoptics waveguides"" "subject:"submicron integratedoptics vaveguides""
1 |
SOI Based Integrated-Optic Microring Resonators for Biomedical Sensing ApplicationsMangal, Nivesh January 2012 (has links) (PDF)
Integrated Silicon Photonics has emerged as a powerful platform in the last
two decades amongst high-bandwidth technologies, particularly since the adop-
tion of CMOS compatible silicon-on-insulator(SOI) substrates. Microring res-
onators are one of the fundamental blocks on a photonic integrated circuit chip o ering versatility in varied applications like sensing, optical bu ering, ltering, loss measurements, lasing, nonlinear e ects, understanding cavity optomechanics etc.
This thesis covers the design and modeling of microring resonators for biosensing applications. The two applications considered are : homogeneous biosensing and wrist pulse pressure monitoring. Also, the designs have been used to fabricate ring resonator device using three different techniques. The results obtained through characterization of these devices are presented. Following are the observations made in lieu of this:
1) Design modeling and analysis - The analysis of ring resonator requires the study of both the straight and bent waveguide sections. Both rib and
strip waveguide geometries have been considered for constructing the device as
a building block by computing their respective eigen modes for both quasi-TE
and quasi-TM polarizations. The non-uniform evanescent coupling between the straight and curved waveguide has been estimated using coupled mode theory. This method provided in estimating the quality-factor and free spec-
tral range (FSR) of the ring-resonator. A case for optimizing the waveguide gap in the directional coupler section of a ring resonator has been presented for homogeneous biosensing application. On similar lines, a model of applying ring resonator for arterial pulse-pressure measurement has been analyzed. The results have been obtained by employing FD-BPM and FDTD including semi-
vectorial eigen mode solutions to evaluate the spectral characteristics of ring
resonator. The modeling and analytical results are supported by commercial
software tools (RSoft).
2) Fabrication and Characterization - For the fabrication, we employ
the design of ring resonator of radius 20 m on SOI substrate with two different waveguide gaps of 350 and 700 nm. Three different process sows have been used for fabricating the same device. The rst technique involved using negative e-beam resist HSQ which after exposure becomes SiO2, acts as a mask for Reactive-Ion Etching (RIE); helping in eliminating an additional step. The second technique involved the use of positive e-beam resist, PMMA for device patterning followed by metal deposition with lift-o . The third tech-
nique employed was Focussed Ion-beam (FIB) which is resist-less patterning
by bombarding Ga+ ions directly onto the top surface of the wafer with the help of a GDS le.
The characterization process involved estimation of loss and observing the be-
havior of optical elds in the device around the wavelength of 1550 nm using
near-field scanning optical microscopy (NSOM) measurement. The estimation of roughness-induced losses has been made by performing Atomic Force Microscopy (AFM) measurements.
In summary, the thesis presents novel design and analysis of SOI based microring resonators for homogeneous biosensing and wrist pulse pressure sensing
applications. Also, the fabrication and characterization of 20 m radius ring-
resonator with 500 500 nm rib cross-section is presented. Hence, this study
brings forth several practical issues concerning application of ring resonators
to biosensing applications.
|
Page generated in 0.066 seconds