Spelling suggestions: "subject:"substituent effect"" "subject:"psubstituent effect""
1 |
Substituted iron phthalocyanines : electrocatalytic activity towards O₂ reduction in a proton exchange membrane fuel cell cathode environment as a function of temperatureBaker, Ryan Christopher Colin 11 1900 (has links)
In this thesis five iron phthalocyanines (FePc’s), four of which having different
electron withdrawing or electron donating substituents, were evaluated as 0₂
reduction reaction (ORR) catalysts. The experimental approach simulated a
PEM fuel cell environment using both ex-situ electrochemical techniques and in
situ fuel cell testing.
The kinetic ORR parameters for the FePc species each adsorbed on a
pyrolytic graphite WE were evaluated at four temperatures (20, 40, 60, 80°C) in a
novel half cell using cyclic voltammetry (CV) and rotating disk electrode (RDE)
voltammetry. Kinetic ORR parameters included the overall ORR electron transfer
number, reaction rate constants, cathodic Tafel slopes, electron transfer numbers
in the rate determining step, and electron transfer co-efficients. An increase in
temperature from 60°C to 80°C showed a decrease in the overall electron
transfer number observed for all four substituted FePc species. A mechanism
was also proposed based on the experimental results.
The RDE results were confirmed using a rotating ring disk electrode (RRDE).
From these RRDE results, the fraction of H₂0₂ produced (XH₂₀₂) at the disk
during the ORR was calculated. These XH₂₀₂ values agreed with the overall
ORR electron transfer numbers from the RDE results obtained under the same
conditions.
lron(Il) 1,2,3,4,8,9,10,11,15,16,17,18,22,23,24,25 — hexadecachioro
29H,31H-phthalocyanine (FePcCI₁₆)was down selected for further investigation as the most stable and active substituted FePc species for the ORR. Both
FePcCl₁₆ and the unsubstituted FePc, were supported on carbon and made into
catalyst inks for carbon fibre paper (CFP) electrode testing, and then evaluated
using CV in the N₂ purged, followed by the air saturated, electrolytes,
respectively.
Finally, MEA’s for fuel cell testing were made using FePc species catalyst ink
cathodes, and commercial Pt/C anodes. The MEA’s were tested using custom
designed and built fuel cell hardware. Open circuit voltages, polarization curves,
and power curves were recorded. Initial results indicated the FePcCI₁₆ MEA’s
showed superior stability, higher open circuit voltages, as well as better
polarization and power curves when compared to the unsubstituted FePc
species.
It was found that FePc species with strongly electron withdrawing
substituents, such as FePcCl₁₆ showed the highest stability and greatest ORR
activity. FePc species, including pyrolized FeNx/C analogues, show much
promise as alternatives to Pt in PEMFC’s, as well as dye sensitized solar cells
(DSSC’s).
|
2 |
Substituted iron phthalocyanines : electrocatalytic activity towards O₂ reduction in a proton exchange membrane fuel cell cathode environment as a function of temperatureBaker, Ryan Christopher Colin 11 1900 (has links)
In this thesis five iron phthalocyanines (FePc’s), four of which having different
electron withdrawing or electron donating substituents, were evaluated as 0₂
reduction reaction (ORR) catalysts. The experimental approach simulated a
PEM fuel cell environment using both ex-situ electrochemical techniques and in
situ fuel cell testing.
The kinetic ORR parameters for the FePc species each adsorbed on a
pyrolytic graphite WE were evaluated at four temperatures (20, 40, 60, 80°C) in a
novel half cell using cyclic voltammetry (CV) and rotating disk electrode (RDE)
voltammetry. Kinetic ORR parameters included the overall ORR electron transfer
number, reaction rate constants, cathodic Tafel slopes, electron transfer numbers
in the rate determining step, and electron transfer co-efficients. An increase in
temperature from 60°C to 80°C showed a decrease in the overall electron
transfer number observed for all four substituted FePc species. A mechanism
was also proposed based on the experimental results.
The RDE results were confirmed using a rotating ring disk electrode (RRDE).
From these RRDE results, the fraction of H₂0₂ produced (XH₂₀₂) at the disk
during the ORR was calculated. These XH₂₀₂ values agreed with the overall
ORR electron transfer numbers from the RDE results obtained under the same
conditions.
lron(Il) 1,2,3,4,8,9,10,11,15,16,17,18,22,23,24,25 — hexadecachioro
29H,31H-phthalocyanine (FePcCI₁₆)was down selected for further investigation as the most stable and active substituted FePc species for the ORR. Both
FePcCl₁₆ and the unsubstituted FePc, were supported on carbon and made into
catalyst inks for carbon fibre paper (CFP) electrode testing, and then evaluated
using CV in the N₂ purged, followed by the air saturated, electrolytes,
respectively.
Finally, MEA’s for fuel cell testing were made using FePc species catalyst ink
cathodes, and commercial Pt/C anodes. The MEA’s were tested using custom
designed and built fuel cell hardware. Open circuit voltages, polarization curves,
and power curves were recorded. Initial results indicated the FePcCI₁₆ MEA’s
showed superior stability, higher open circuit voltages, as well as better
polarization and power curves when compared to the unsubstituted FePc
species.
It was found that FePc species with strongly electron withdrawing
substituents, such as FePcCl₁₆ showed the highest stability and greatest ORR
activity. FePc species, including pyrolized FeNx/C analogues, show much
promise as alternatives to Pt in PEMFC’s, as well as dye sensitized solar cells
(DSSC’s).
|
3 |
Substituted iron phthalocyanines : electrocatalytic activity towards O₂ reduction in a proton exchange membrane fuel cell cathode environment as a function of temperatureBaker, Ryan Christopher Colin 11 1900 (has links)
In this thesis five iron phthalocyanines (FePc’s), four of which having different
electron withdrawing or electron donating substituents, were evaluated as 0₂
reduction reaction (ORR) catalysts. The experimental approach simulated a
PEM fuel cell environment using both ex-situ electrochemical techniques and in
situ fuel cell testing.
The kinetic ORR parameters for the FePc species each adsorbed on a
pyrolytic graphite WE were evaluated at four temperatures (20, 40, 60, 80°C) in a
novel half cell using cyclic voltammetry (CV) and rotating disk electrode (RDE)
voltammetry. Kinetic ORR parameters included the overall ORR electron transfer
number, reaction rate constants, cathodic Tafel slopes, electron transfer numbers
in the rate determining step, and electron transfer co-efficients. An increase in
temperature from 60°C to 80°C showed a decrease in the overall electron
transfer number observed for all four substituted FePc species. A mechanism
was also proposed based on the experimental results.
The RDE results were confirmed using a rotating ring disk electrode (RRDE).
From these RRDE results, the fraction of H₂0₂ produced (XH₂₀₂) at the disk
during the ORR was calculated. These XH₂₀₂ values agreed with the overall
ORR electron transfer numbers from the RDE results obtained under the same
conditions.
lron(Il) 1,2,3,4,8,9,10,11,15,16,17,18,22,23,24,25 — hexadecachioro
29H,31H-phthalocyanine (FePcCI₁₆)was down selected for further investigation as the most stable and active substituted FePc species for the ORR. Both
FePcCl₁₆ and the unsubstituted FePc, were supported on carbon and made into
catalyst inks for carbon fibre paper (CFP) electrode testing, and then evaluated
using CV in the N₂ purged, followed by the air saturated, electrolytes,
respectively.
Finally, MEA’s for fuel cell testing were made using FePc species catalyst ink
cathodes, and commercial Pt/C anodes. The MEA’s were tested using custom
designed and built fuel cell hardware. Open circuit voltages, polarization curves,
and power curves were recorded. Initial results indicated the FePcCI₁₆ MEA’s
showed superior stability, higher open circuit voltages, as well as better
polarization and power curves when compared to the unsubstituted FePc
species.
It was found that FePc species with strongly electron withdrawing
substituents, such as FePcCl₁₆ showed the highest stability and greatest ORR
activity. FePc species, including pyrolized FeNx/C analogues, show much
promise as alternatives to Pt in PEMFC’s, as well as dye sensitized solar cells
(DSSC’s). / Applied Science, Faculty of / Chemical and Biological Engineering, Department of / Graduate
|
4 |
Efeito da modificação da porção imínica de betalaínas sobre as suas propriedades eletrônicas / Effects of imine portion modification on the electronic properties of betalainsPioli, Renan Moraes 23 November 2018 (has links)
Betalaínas são pigmentos naturais derivados da L-tirosina encontrados em um número restrito de plantas e fungos. Sob o ponto de vista químico, betalaínas são iminas ou sais de imínio que se originam do acoplamento aldimínico entre o ácido betalâmico e aminas ou aminoácidos. Embora sejam conhecidas mais de 70 betalaínas naturais, os estudos sobre as relações entre a estrutura e as propriedades de betalaínas ainda são limitados. Esta Tese de Doutorado descreve a semissíntese e estudo da hidrólise e das propriedades fotofísicas e redox de três grupos de betalaínas não naturais: N-fenilbetalaínas (pBeets), N-metil-N-fenilbetalaínas (N-Me-pBeets) e N,N-difenilbetalaínas (dipBeets). O estudo de quatorze pBeets para substituidas sugere que a porção imina destes compostos está protonada em meio aquoso neutro e que substituintes atraentes de elétron na porção fenílica favorecem o deslocamento de carga do nitrogênio 2-piperideínico para a porção imínica. A constante de hidrólise aumenta linearmente com o aumento do valor de σp de Hammett do substituinte, dado o aumento da eletrofilificade do carbono aldimínico. Por outro lado, pBeets com substituintes atraentes de elétron são mais fluorescentes. A adição de metila ou fenila ao nitrogênio da imina cria um ambiente hidrofóbico que compromete o ataque da água e diminui a constante de velocidade de hidrólise provocando, contudo, uma diminuição na fluorescência. Os resultados foram racionalizados empregando-se espectroscopia de ressonância magnética nuclear, espectrofotometria e voltametria cíclica. / Betalains are natural pigments derived from L-tyrosine that are found in a restricted number of plants and fungi. From the chemical point of view, betalains are imines or iminium salts that originate from the aldimine coupling between betalamic acid and amines or amino acids. Although more than 70 natural betalains are known, studies on structure-property relationships of betalains are still limited. This doctoral thesis describes the semi-synthesis and study of the hydrolysis as well as photophysical and redox properties of three groups of non-natural betalaines: N-phenylbetalaines (pBeets), N-methyl-N-phenylbetalines (N-Me-pBeets) and N,N-diphenylbetalaines (dipBeets). The study of fourteen substituted pBeets suggests that the imine portion of these compounds is protonated in neutral aqueous medium and that attractive electron substituents on the phenyl portion favor the displacement of 2-piperidene nitrogen charge to the imine portion. The hydrolysis constant increases linearly with the increase of the Hammett\'s σp value of the substituent, given the increase in the electrophilicty of the aldimine carbon. On the other hand, pBeets with attractive electron substituents are more fluorescent. The addition of methyl or phenyl to the imine nitrogen creates a hydrophobic environment upon water attack and decreases the hydrolysis rate constant, however, causing a decrease in fluorescence. The results were rationalized using nuclear magnetic resonance spectroscopy, spectrophotometry and cyclic voltammetry.
|
5 |
Efeito da modificação da porção imínica de betalaínas sobre as suas propriedades eletrônicas / Effects of imine portion modification on the electronic properties of betalainsRenan Moraes Pioli 23 November 2018 (has links)
Betalaínas são pigmentos naturais derivados da L-tirosina encontrados em um número restrito de plantas e fungos. Sob o ponto de vista químico, betalaínas são iminas ou sais de imínio que se originam do acoplamento aldimínico entre o ácido betalâmico e aminas ou aminoácidos. Embora sejam conhecidas mais de 70 betalaínas naturais, os estudos sobre as relações entre a estrutura e as propriedades de betalaínas ainda são limitados. Esta Tese de Doutorado descreve a semissíntese e estudo da hidrólise e das propriedades fotofísicas e redox de três grupos de betalaínas não naturais: N-fenilbetalaínas (pBeets), N-metil-N-fenilbetalaínas (N-Me-pBeets) e N,N-difenilbetalaínas (dipBeets). O estudo de quatorze pBeets para substituidas sugere que a porção imina destes compostos está protonada em meio aquoso neutro e que substituintes atraentes de elétron na porção fenílica favorecem o deslocamento de carga do nitrogênio 2-piperideínico para a porção imínica. A constante de hidrólise aumenta linearmente com o aumento do valor de σp de Hammett do substituinte, dado o aumento da eletrofilificade do carbono aldimínico. Por outro lado, pBeets com substituintes atraentes de elétron são mais fluorescentes. A adição de metila ou fenila ao nitrogênio da imina cria um ambiente hidrofóbico que compromete o ataque da água e diminui a constante de velocidade de hidrólise provocando, contudo, uma diminuição na fluorescência. Os resultados foram racionalizados empregando-se espectroscopia de ressonância magnética nuclear, espectrofotometria e voltametria cíclica. / Betalains are natural pigments derived from L-tyrosine that are found in a restricted number of plants and fungi. From the chemical point of view, betalains are imines or iminium salts that originate from the aldimine coupling between betalamic acid and amines or amino acids. Although more than 70 natural betalains are known, studies on structure-property relationships of betalains are still limited. This doctoral thesis describes the semi-synthesis and study of the hydrolysis as well as photophysical and redox properties of three groups of non-natural betalaines: N-phenylbetalaines (pBeets), N-methyl-N-phenylbetalines (N-Me-pBeets) and N,N-diphenylbetalaines (dipBeets). The study of fourteen substituted pBeets suggests that the imine portion of these compounds is protonated in neutral aqueous medium and that attractive electron substituents on the phenyl portion favor the displacement of 2-piperidene nitrogen charge to the imine portion. The hydrolysis constant increases linearly with the increase of the Hammett\'s σp value of the substituent, given the increase in the electrophilicty of the aldimine carbon. On the other hand, pBeets with attractive electron substituents are more fluorescent. The addition of methyl or phenyl to the imine nitrogen creates a hydrophobic environment upon water attack and decreases the hydrolysis rate constant, however, causing a decrease in fluorescence. The results were rationalized using nuclear magnetic resonance spectroscopy, spectrophotometry and cyclic voltammetry.
|
6 |
Thermal cis-to-trans isomerization mechanism of N-(phenylazo)-substituted nitrogen heterocyclesFu, Jinlong January 2008 (has links)
Triazenes, compounds containing a diazoamino moiety (–N(1)=N(2)–N(3)<), are known for their reversible cis-trans isomerization character and hence, have the potential to be used in photoswitchable devices and photostorage media. However, little is known about their cis-trans isomerization mechanism. In this thesis, kinetic studies on the thermal cis-to-trans isomerization of N-(phenylazo)-substituted nitrogen heterocycles are presented. It is shown that the isomerization rate constant increases as the size and electron-donating character of the cyclic amine increases, as the electron-withdrawing character of the para substituent group on the phenyl ring increases, and as the polarity of the solvent increases. All these trends are interpreted in terms of a rotational isomerization mechanism involving a dipolar transition state. In addition, photolytic cleavage of the N(2)–N(3) bond of target substrates is shown to be affected as well by the size and electronic character of the cyclic amine, the electronic character of the phenyl ring substituent, and the polarity of the solvent, with the result that the photolysis yield increases as the isomerization rate decreases.
Theoretical calculations on target substrates both in the gas phase and various solvents were also performed based on DFT-B3LYP/6-31+G* method. Overall, the cis-to-trans isomerization is predicted to take place through rotation around the N(1)=N(2) bond. Furthermore, the calculated energy barriers are found to be influenced by the size and electronic character of the cyclic amine, the electronic character of the phenyl ring substituent, and the polarity of the solvent, consistent with the effects obtained experimentally from the kinetic studies.
|
7 |
Thermal cis-to-trans isomerization mechanism of N-(phenylazo)-substituted nitrogen heterocyclesFu, Jinlong January 2008 (has links)
Triazenes, compounds containing a diazoamino moiety (–N(1)=N(2)–N(3)<), are known for their reversible cis-trans isomerization character and hence, have the potential to be used in photoswitchable devices and photostorage media. However, little is known about their cis-trans isomerization mechanism. In this thesis, kinetic studies on the thermal cis-to-trans isomerization of N-(phenylazo)-substituted nitrogen heterocycles are presented. It is shown that the isomerization rate constant increases as the size and electron-donating character of the cyclic amine increases, as the electron-withdrawing character of the para substituent group on the phenyl ring increases, and as the polarity of the solvent increases. All these trends are interpreted in terms of a rotational isomerization mechanism involving a dipolar transition state. In addition, photolytic cleavage of the N(2)–N(3) bond of target substrates is shown to be affected as well by the size and electronic character of the cyclic amine, the electronic character of the phenyl ring substituent, and the polarity of the solvent, with the result that the photolysis yield increases as the isomerization rate decreases.
Theoretical calculations on target substrates both in the gas phase and various solvents were also performed based on DFT-B3LYP/6-31+G* method. Overall, the cis-to-trans isomerization is predicted to take place through rotation around the N(1)=N(2) bond. Furthermore, the calculated energy barriers are found to be influenced by the size and electronic character of the cyclic amine, the electronic character of the phenyl ring substituent, and the polarity of the solvent, consistent with the effects obtained experimentally from the kinetic studies.
|
8 |
COMPUTATIONAL AND SPECTROSCOPIC STUDIES OF THE PHOTOCHEMISTRY AND PHOTOPHYSICS OF DIPHOSPHENESPeng, Huo-Lei 21 March 2007 (has links)
No description available.
|
9 |
Folding of <i>ortho</i>-phenylene oligomersMathew, Sanyo 31 July 2014 (has links)
No description available.
|
Page generated in 0.052 seconds