Spelling suggestions: "subject:"scarce.research."" "subject:"earlierresearch.""
1 |
A study of the cane sugar diffusion process.Rein, Peter William. January 1972 (has links)
A mathematical model has been developed to
represent the extraction of sugar from sugar cane in the diffusion
process. As a consequence of the structure of prepared cane,
extraction is postulated to occur via two first order relations in
parallel.
The model was found to represent accurately the
extraction behaviour observed in two different experimental
configurations. Experiments on a laboratory scale were undertaken
to elucidate the mechanism and basic rates of extraction.
The results are consistent with the postulate that extraction takes
place by a combination of washing and molecular diffusion.
The diffusion process was simulated experimentally
in a fixed-bed pilot plant diffuser. Model parameter values
estimated from this data provide evidence of the effect of liquid
hydrodynamics on the extraction process. These results have
been interpreted in terms of liquid holdup, liquid velocities and
the efficiency of liquid- solid contacting.
It is shown how the model can be applied to full scale
diffusers of the moving-bed type, which will enable prediction
of performance and the choice of optimum operating conditions. / Thesis (Ph.D.)-University of Natal, Durban, 1972.
|
2 |
Promoters for sugarcane transformation : isolation of specific sequences and evaluation of rolC.Groenewald, Sarita. 23 December 2013 (has links)
Increasing the sucrose yield and the disease resistance of plants are two major
objectives of the transgenic sugarcane plant programme in South Africa. The
sugarcane culm has thus been identified as one of the main target areas for
transgene expression. A shortage of reliable promoter elements as well as patent
limitations have necessitated the isolation of promoters that are preferentially
expressed in the sugarcane culm. In the present study two different approaches were
followed to isolate such promoters, and the bacterial promoter, rolC, was evaluated for tissue-specific expression in sugarcane.
Differential display is a non-directed technique that was used to identify genes that
are differentially expressed in the mature sugarcane culm. The original method was
modified, and four putative culm-preferential fragments were isolated. Sequence and
hybridisation analyses revealed that these fragments were false positives, and could therefore not be used to obtain a culm-specific promoter.
Activity of the Agrobacterium rolC promoter was evaluated by analysing expression
patterns of two reporter genes in the mature culm of transgenic sugarcane plants.
Nucleic acid analyses indicated that the foreign DNA was incorporated into the sugarcane genome, and that mRNA transcripts were produced. Histochemical
analysis was done to visualise rolC-driven GUS and GFP expression in the mature
sugarcane culm. In both cases the reporter gene expression was restricted to the vascular bundles and specifically to the phloem.
A directed approach was followed to isolate the gene and subsequently the promoter
of the β-subunit of pyrophosphate-dependent phosphofructokinase (PFP-β). An
incomplete cDNA clone was obtained from a mature culm cDNA library, and was
used for the screening of a sugarcane genomic library. Two clones containing
different parts of the PFP-β gene were isolated. A Deletion Factory™ system was
used to analyse the clone containing the 5' end of the gene. The first five exons and
1747 bp of the 5' flanking region of the gene were sequenced. Preliminary activity analysis of the promoter region was done by constructing two expression vectors, and analysing transient GUS expression in sugarcane callus. Results indicated that the promoter is capable of driving foreign gene expression in callus. Transient expression levels were lower than that of the maize Ubi-1 promoter. Further analysis of the 5' flanking region will be done to establish whether cis-acting elements outside
the analysed area have an influence on the activity of the promoter. / Thesis (Ph.D.)-University of Natal, Pietermaritzburg, 1997.
|
3 |
The potential for using remote sensing to quantify stress in and predict yield of sugarcane (Saccharun spp. hybrid)Abdel-Rahman, Elfatih Mohamed. January 2010 (has links)
South Africa is the leading producer of sugarcane in Africa and one of the largest sugarcane producers in the world. Sugarcane is grown under a wide range of climatic, agronomic, and socio-economic conditions in the country. Stress factors such as water and nutrient deficiencies, and insect pests and diseases are among the most important factors affecting sugarcane production in the country. Monitoring of stress in sugarcane is therefore essential for assessing the consequences on yield and for taking action of their mitigation. The prediction of sugarcane yield, on the other hand is also a significant practice for making informed decisions for effective and sound crop planning and management efforts regarding e.g., milling schedules, marketing, pricing, and cash flows. In South Africa, the detection of stress factors such as nitrogen (N) deficiency and sugarcane thrips (Fulmekiola serrata Kobus) damage and infestation are made using traditional direct methods whereby leaf samples are collected from sugarcane fields and the appropriate laboratory analysis is then performed. These methods are regarded as being time-consuming, labour-intensive, costly, and can be biased as often they are not uniformly applied across sugarcane growing areas in the country. In this regard, the development of systematically organised geo-and time-referenced accurate methods that can detect sugarcane stress factors and predict yields are required. Remote sensing offers near-real-time, potentially inexpensive, quick and repetitive data that could be used for sugarcane monitoring. Processing techniques of such data have recently witnessed more development leading to more effective extraction of information. In this study the aim was to explore the potential use of remote sensing to quantify stress in and predict yield of sugarcane in South Africa. In the first part of this study, the potential use of hyperspectral remote sensing (i.e. with information on many, very fine, contiguous spectral bands) in estimating sugarcane leaf N concentration was examined. The results showed that sugarcane leaf N can be predicted at high accuracy using spectral data collected using a handheld spectroradiometer (ASD) under controlled laboratory and natural field conditions. These positive results prompted the need to test the use of canopy level hyperspectral data in predicting sugarcane leaf N concentration. Using narrow NDVI-based vegetation indices calculated from Hyperion data, sugarcane leaf N concentration could reliably be estimated. In the second part of this study, the focus was on whether leaf level hyperspectral data could detect sugarcane thrips damage and predict the incidence of the insect. The results indicated that specific wavelengths located in the visible region of the electromagnetic spectrum have the highest possibility of detecting sugarcane thrips damage. Thrips counts could also adequately be predicted for younger sugarcane crops (4–5 months). In the final part of this study, the ability of vegetation indices derived from multispectral data (Landsat TM and ETM+) in predicting sugarcane yield was investigated. The results demonstrated that sugarcane yield can be modelled with relatively small error, using a non-linear random forest regression algorithm. Overall, the study has demonstrated the potential of remote sensing techniques to quantify stress in and predict yield of sugarcane. However, it was found that models for detecting a stress factor or predicting yield in sugarcane vary depending on age group, variety, season of sampling, conditions at which spectral data are collected (controlled laboratory or natural field conditions), level at which remotely-sensed data are captured (leaf or canopy levels), and irrigation conditions. The study was conducted in only one study area (the Umfolozi mill supply area) and very few varieties (N12, N19, and NCo 376) were tested. For practical and operational use of remote sensing in sugarcane monitoring, the development of an optimum universal model for detecting factors of stress and predicting yield of sugarcane, therefore, still remains a challenging task. It is recommended that models developed in this study should be tested – or further elaborated – in other South African sugarcane producing areas with growing conditions similar to those under which the predictive models have been developed. Monitoring of sugarcane thrips should also be evaluated using remotely-sensed data at canopy level; and the ability of multispectral sensors other than Landsat TM and ETM+ should be tested for sugarcane yield prediction. / Thesis (Ph.D.)-University of KwaZulu-Natal, Pietermaritzburg, 2010.
|
4 |
Development and evaluation of a sugarcane yield forecasting system.Lumsden, Trevor Graeme. January 2000 (has links)
There is a need in the South African sugar industry to investigate improved techniques for
forecasting seasonal sugarcane yields. An accurate and timely forecast of seasonal cane yield is
of great value to the industry, and could potentially allow for substantial economic savings to be
made. Advances by climatologists have resulted in increasingly accurate and timely seasonal
climate forecasts. These advances, coupled with the ongoing advances made in the field of crop
yield simulation modelling, present the sugar industry with the possibility of obtaining improved
cane yield forecasts. In particular, the lead time of these forecasts would be improved relative to
traditional techniques. Other factors, such as the flexibility offered by simulation modelling in the
representation of a variety of seasonal scenarios, would also contribute to the possibility of
obtaining improved cane yield forecasts.
The potential of applying crop yield simulation models and seasonal rainfall forecasts in cane yield
forecasting was assessed in this research project. The project was conducted in the form of a case
study in the Eston Mill Supply Area. Two daily time step cane yield simulation models, namely
the ACRU-Thompson and CANEGRO-DSSAT models, were initially evaluated to test their ability
to accurately simulate historical yields given an observed rainfall record. The model found to be
the more appropriate for yield forecasting at Eston, the ACRU-Thompson model, was then used
to generate yield forecasts for a number of seasons, through the application of seasonal rainfall
forecasts in the model. These rainfall forecasts had previously been translated into daily rainfall
values for input into the model. The sugarcane yield forecasts were then evaluated against
observed yields, as well as against forecasts generated by more traditional methods, these methods
being represented by a simple rainfall model and Mill Group Board estimates.
Although the seasonal rainfall forecasts used in yield forecasting were found not to be particularly
accurate, the proposed method provided more reliable cane yield forecasts, on average, than those
using the traditional forecasting methods. A simple cost-benefit analysis indicated that the
proposed method could potentially give rise to the greatest net economic benefits compared to the
other methods. Recommendations are made for the practical implementation of such a method.
Future areas of research are also identified. / Thesis (M.Sc.)-University of Natal, Pietermaritzburg, 2000.
|
5 |
Water use, growth and development of sugarcane as affected by a trash mulchingRabothata, Matome Freddy 17 August 2010 (has links)
Retention of a sugarcane mulch blanket, following green cane harvesting could increase soil water conservation, soil health (organic matter content and micro-organism activity) and soil nutrient status. However, little is known about the effect of such a mulch layer on sugarcane crop growth and development. To study the latter, an experiment was carried out in Komatipoort at the South African Sugarcane Research Institute’s Experimental Station. Row spacing arrangement was either 1.5 m or 1.2 m x 0.6 m tram rows. N14 was planted as a fast canopy growing cultivar and N26 as a slow canopy growing cultivar. Plots were either covered by a mulch layer or left as bare soil. Stalk population, stalk height and radiation interception were measured every second week. Soil temperature readings were logged hourly at a depth of 0.15 m. Preliminary results indicated that early growth and development of sugarcane was delayed under mulch treatments. Stalk length of N26 was reduced more than that of N14. Stalk population of both cultivars were significantly lower under the mulch treatment. Fractional interception of solar radiation was only 50% at 150 days after planting for the mulch treatment, compared to 70% for bare plots. Slow initial growth and delayed canopy development in mulch treatments were associated with low soil temperatures in the period leading up to full canopy closure. Soil temperature in the mulch treatments remained between 3 to 4oC lower than the bare soil treatments. Early indications are that the presence of a mulch layer may reduce early growth and development of sugarcane. Copyright / Dissertation (MInstAgrar)--University of Pretoria, 2010. / Plant Production and Soil Science / unrestricted
|
6 |
Effects of irrigation-induced salinity and sodicity on soil chemical and microbial properties and sugarcane yield. / ThesisRietz, Diana Nicolle. January 2001 (has links)
The effects of irrigation-induced salinity and/or sodicity on sugarcane yield, and two growth parameters, namely stalk height and number of nodes per stalk , were investigated on a sugarcane estate in the Zimbabwean lowveld. The effects of soil salinity and/or sodicity on the size, activity
and metabolic efficiency of the soil microbial community was also studied. Furrow-irrigated fields which had a gradient in soil salinity and/or sodicity which increased from the upper to lower ends of the fields were selected for this study. This gradient was recognized by decreasing sugarcane
growth down from the upper to the lower ends and the appearance of salt on the soil surface at the lower ends of fields. Sugarcane growth was classified as either dead, poor, satisfactory or good; and soil samples (0-0 .15 m, 0.15-0 .3 m, 0.3-0 .6 m and 0.6-0.9 m) were taken from each of these areas. Soils from under adjacent areas of undisturbed veld were also sampled. Sugarcane
growth and yields in micro-plots of the various areas of the fields were measured. Foliar samples of sugarcane were taken at 22 weeks of age and analysed for nutrient content. Soil salinity and sodicity were quantified by measuring pH(water), electrical conductivity (ECe) and cation content of saturation paste extracts and the exchangeable cation content. From this information, the
sodium adsorption ratio (SARe)and exchangeable sodium percentage (ESP) were also calculated.
The calcareous, vertic soils in the study area under undisturbed veld were found to have high pH
values (8 to 9.5), very high exchangeable Ca and Mg concentrations and there was evidence of
accumulation of soluble salts in the surface 0.15 m. Under sugarcane production, irrigation induced
salinity and sodicity had developed. Under poor and dead sugarcane, high values for ECe,
SARe, and ESP were generally encountered in the surface 0-0 .3 m of the profile. In addition, the
pH values under sugarcane were often between 9 and 10 particularly in profiles where sugarcane grew poorly or had died. As expected, pH was positively related to ESP and SARe, but negatively related to ECe.
Measurements of aggregate stability by wet sieving, the Emerson dispersion test and the Loveday
dispersion score all showed that soils from the study sited tended to disperse and that dispersion
was most apparent where high ESP and SARe values occurred in association with elevated pH
values and relatively low ECe values. These measurements confirmed observations at the sites of
low infiltration rates and restricted drainage particularly on the lower ends of fields where sugarcane had died. In addition to the above measurements it was also observed that there was a rise in the watertable
under furrow irrigation and that the watertable was nearest to the surface at the lower ends of the
fields. In some cases the watertable was observed to be only 0.2 to 0.3 m from the surface. Thus,
death of roots due to anaerobic conditions could be occurring to a greater extent at the lower ends
of the fields. Another consequence of the high watertable was that these vertic soils were
observed to remain in a permanently swollen state. This limits air and water movement in the soil
profile as such soils need to be allowed to dry out and crack regularly so that macroporosity can be restored.
Sugarcane yield, stalk height and number of nodes per stalk were not significantly related to ECe.
Sugarcane yields were, however, significantly correlated with ESP and pH while stalk height and
number of nodes were negatively correlated with ESP, SARe and pH. These results suggested
that sodicity was a more limiting factor for sugarcane growth than salinity. Foliar analysis of leaf
tissue did not reveal substantial differences in macro- or micro-nutrient content between good and
poorly-growing sugarcane.
It was concluded that the gradient of decreasing sugarcane growth down the furrow-irrigated fields, with crop death at the lower ends, was the result of a combination of factors. That is, the
watertable had risen due to over-irrigation and it was nearer the surface at the lower ends of the fields. Due to capillary rise of salts, this resulted in sodic and sometimes saline-sodic conditions
in the surface soil. These conditions could limit plant growth through ion toxicities, plant water
stress and inhibition of root growth and function and physiological processes. These would be
induced by the high pH and high salt, Na and HC03- concentrations in soil solution. Poor
physical conditions associated with sodicity and the continually swollen state of the soils
presumably limited infiltration and aeration in the surface soil, and probably restricted root
growth. In addition, it is likely that the high watertable limited effective crop rooting depth to
about 0.2 m at the lower ends of the fields. The net result was that sugarcane died at the lower
ends. A negative effect of soil salinity and/or sodicity was also observed on the soil microbial
population. Significant negative correlations were obtained with ECe SARe and ESP with
microbial biomass C and microbial activity (as measured by FDA hydrolytic activity or arginine
ammonification rate). The activity of enzymes involved in C (P-glucosidase), P (phosphatase) and
S (arylsulfatase) mineralization and potential nitrogen mineralization (as determined by aerobic
incubation) were also negatively correlated with these factors, with the exception of arylsulfatase
activity and ESP. All the above mentioned microbial population measures were also positively
correlated with soil organic C content, besides potential nitrogen mineralization. The metabolic
quotient, which provides an indication of stress and efficiency of the microbial community,
increased considerably with increasing salinity and sodicity and decreased with soil organic C.
Thus, increasing salinity and/or sodicity resulted in a smaller, more stressed, less efficient
microbial community, while the turnover rate and cycling of C, N, P and S also decreased. It was
concluded that salt affected soil not only causes a decline in sugarcane yield through raising the concentration of soluble salts in soil solution, but also has a detrimental effect on microbial activity and on mineralization of soil organic C, N, Sand P. / Thesis (M.Sc.)-University of Natal, Pietermaritzburg, 2001.
|
7 |
Development and evaluation of model-based operational yield forecasts in the South African sugar industry.Bezuidenhout, Carel Nicolaas. January 2005 (has links)
South Africa is the largest producer of sugar in Africa and one of the ten largest
sugarcane producers in the world. Sugarcane in South Africa is grown under a wide
range of agro-climatic conditions. Climate has been identified as the single most
important factor influencing sugarcane production in South Africa. Traditionally,
sugarcane mill committees have issued forecasts of anticipated production for a
region. However, owing to several limitations of such committee forecasts, more
advanced technologies have had to be considered. The aim of this study has been to
develop, evaluate and implement a pertinent and technologically advanced operational
sugarcane yield forecasting system for South Africa. Specific objectives have
included literature and technology reviews, surveys of stakeholder requirements, the
development and evaluation of a forecasting system and the assessment of
information transfer and user adoption. A crop yield model-based system has been
developed to simulate representative crops for derived Homogeneous Climate Zones
(HCZ). The system has integrated climate data and crop management, soil, irrigation
and seasonal rainfall outlook information. Simulations of yields were aggregated from
HCZs to mill supply area and industry scales and were compared with actual
production. The value of climate information (including climate station networks) and
seasonal rainfall outlook information were quantified independently. It was concluded
that the system was capable of forecasting yields with acceptable accuracy over a
wide range of agro-climatic conditions in South Africa. At an industry scale, the
system captured up to 58% of the climatically driven variability in mean annual
sugarcane yields. Forecast accuracies differed widely between different mill supply
areas, and several factors were identified that may explain some inconsistencies.
Seasonal rainfall outlook information generally enhanced forecasts of sugarcane
production. Rainfall outlooks issued during the summer months seemed more
valuable than those issued in early spring. Operationally, model-based forecasts can
be expected to be valuable prior to the commencement of the milling season in April.
Current limitations of forecasts include system calibration, the expression of
production relative to that of the previous season and the omission of incorporating
near real-time production and climate information. Several refinements to the forecast
system are proposed and a strong collaborative approach between modellers,
climatologists, mill committees and other decision makers is encouraged. / Thesis (Ph.D.)-University of KwaZulu-Natal, Pietermaritzburg, 2005.
|
8 |
Incorporating the Canegro sugarcane model into the DSSAT V4 cropping system model framework.Jones, Matthew Robert. 31 July 2013 (has links)
Canegro is a leading sugarcane crop simulation model and has been used extensively in agronomic research and management. The model has been under development since the late 1980s at the South African Sugarcane Research Institute (SASRI). The Decision Support System for Agrotechnology Transfer (DSSAT) is a software package containing models for a wide range of field crops, and utilities for processing, storing and analysing model inputs and outputs. Canegro was included as part of version 3.1 of DSSAT in the mid-1990s. The SASRI Canegro model was subsequently developed further, but these changes were never integrated, nor incorporated, into DSSAT. DSSAT has also developed substantially, and as of version 4 adopted a modular Cropping System Model (CSM) structure, providing numerous scientific and practical advantages over previous non-modular versions. The DSSAT-Canegro v.3 model was not modified to use this modular structure.
Following recognition of the advantages offered by DSSAT and its modular CSM, a project was initiated to incorporate the Canegro model into the DSSAT CSM. The project entailed: (i) restructuring and integrating the current Canegro plant growth and development code into the DSSAT v4 CSM modular framework, making use of its generic modules for management, soil, weather and the energy balance; (ii) verification of DSSAT CSM Canegro model results against the current SASRI version of Canegro to ensure that the new model produced similar results to the original model, for a set of simulated situations; and (iii) evaluation of the new DSSAT CSM Canegro model against experimental datasets.
The new DSSAT v4 CSM Canegro model has been verified to behave identically to the SASRI Canegro model when the water balance is not modelled and growth can occur at climatic potential rates. When the water balance is simulated but where the crop is not stressed, near identical output is produced by both models. Under water-stressed conditions, some discrepancies appear between the two models, due to differences in the calculation of reference evaporation, soil surface evaporation and runoff. Validation of the new model against data from 16 experimental crops produced root mean squared errors of 6.62 t ha-1 for stalk dry mass and 3.59 t ha-1 for sucrose mass – very similar to published values for Canegro. This project has yielded a functional, well-documented, maintainable and user-friendly version of the Canegro model, which is available for universal use via the official release of the DSSAT v4.5. / Thesis (M.Sc.)-University of KwaZulu-Natal, Pietermaritzburg, 2013.
|
9 |
Field assessment of agronomic traits and in vitro acetolactate synthase characterisation of imazapyr herbicide tolerant sugarcane.Maphalala, Kwanele Zakhele. January 2013 (has links)
Weed control is a major cost for growers in the sugarcane industry, especially for monocotyledonous species such as Cynodon and Rottboellia spp. The introduction of imazapyr-tolerant sugarcane would be advantageous as this herbicide has shown to be effective against the above-mentioned weeds but it also kills sugarcane. In a previous study in our laboratory, several sugarcane putative-mutant lines of variety N12 were generated by in vitro exposure of embryogenic callus to 16 mM ethyl methanesulfonate (EMS), followed by selection on imazapyr-containing medium. Tolerance to a low dose of imazapyr was confirmed in seven of those lines when the herbicide was applied (182 g a.i. ha-1) to 3 month-old plants in pots. The aim of the present study was to identify which of the seven herbicide mutant lines had agronomic characteristics at least equivalent to un-mutated N12. The objectives were to: 1) confirm tolerance to increased rate (312 and 625 g a.i. ha-1) of imazapyr in field plants; 2) measure the agronomic characteristics of these lines; 3) determine the effect of residual soil herbicide activity on germination of sugarcane setts.
The seven mutant lines (Mut1-Mut7) and un-mutated N12 were clonally propagated in vitro by shoot multiplication followed by rooting and planted in three plots (untreated, sprayed with 312 or 625 g a.i. ha-1 imazapyr), in the field, in a randomized complete block design. In the untreated control plot there were no significant differences between the control and the mutant plants for agronomic traits (tiller number/plot, stalk height and stalk diameter) or estimated yield (kg/plot) after 10 months, indicating that the mutation process had no effect on general plant phenotype. In the sprayed (312 and 625 g a.i. ha-1) plots, Mut1, Mut4, Mut5, Mut6 and Mut7 plants showed tolerance to imazapyr as the leaves remained green compared with Mut2, Mut3 and N12 control plants, which displayed chlorotic leaves and eventually died in the plot sprayed with 625 g a.i. ha-1. Post-herbicide application, the yields of Mut5, Mut6 and Mut7 (52.33, 43.43 and 41.43 kg/plot, respectively) from the 312 g a.i. ha-1 plot were not significantly different from that of N12 control (53. 61 kg/plot) in the untreated plot. However, in the 312 g a.i. ha-1 plot, the yield and agronomic trait measurements of the untreated N12 control were significantly higher than those of the herbicide-susceptible plants Mut2 and Mut3. Similarly, in the 625 g a.i. ha-1 plot, the recorded yields for Mut4, Mut6 and Mut7 were 41.60, 43.44 and 36.30 kg/plot, respectively, indicating that their imazapyr tolerance and yield characteristics were comparable to the untreated N12 control.
Imazapyr is conventionally applied to a fallow field 3-4 months prior to planting sugarcane as there is residual herbicide activity in the soil that suppresses sugarcane germination and growth. Therefore, in order to establish if the herbicide-tolerant mutants could germinate in
iii
an imazapyr-treated field, 3-budded setts of the mutant lines (Mut1-Mut7) and N12 control were planted in two plots, one unsprayed and one sprayed with 1254 g a.i. ha-1 imazapyr, 2 weeks previously. Germination was calculated after 3 weeks as the number of germinated setts in each plot/no. germinated setts in unsprayed plot x100. In the sprayed plot, the setts from Mut1, Mut4 and Mut6 displayed the highest germination percentages (60, 71 and 74%, respectively) compared with Mut2 (24%), Mut3 (46%), Mut5 (34%), Mut7 (40%) and the N12 control (12%).
The in vitro acetolactate synthase (ALS) enzyme activity of 10 month-old plants from the untreated plot was assessed in the presence of 0-30 μM imazapyr to determine the herbicide concentration that inhibited ALS activity by 50% (IC50). The IC50 values for the mutated lines were between 3 and 30 μM, i.e. 1.5-8.8 times more tolerant to imazapyr than the N12 control plants, with Mut6 displaying the highest IC50 value (30 μM). On the basis of the results, it was concluded that Mut1, Mut6 and Mut7 lines were more tolerant to imazapyr than N12 and the other tested lines. Future work includes phenotypically assessing these lines for traits including sucrose content, fibre content, actual yield (tons cane ha-1) and altered pest and disease resistance. Once isolated and sequenced, the ALS gene conferring imazapyr tolerance can be used in genetic bombardment in the genetic modification approach as the gene of interest or as a selectable marker. In addition, the imazapyr-tolerant line can be used for commercial purposes in the field and as the parent plant in the breeding programme. / Thesis (M.Sc.Agric.)-University of KwaZulu-Natal, Durban, 2013.
|
10 |
Agroclimatic response mapping for sugarcane production in southern Africa.Hull, Phillip John. January 2008 (has links)
As is the case in many other regions in the world, sugarcane production in southern Africa is affected by a wide range of climatic conditions, which can vary considerably from location to location and from year to year. As a result, the season length and growth cycles of sugarcane in southern Africa differ greatly. Such conditions include the hot and dry regions of northern KwaZulu-Natal, Swaziland and Mpumalanga, where sugarcane is mostly irrigated, to the humid sub-tropical coastal belt extending from the far north coast of KwaZulu-Natal to areas in the Eastern Cape, as well as the cool frost prone midlands regions of KwaZulu-Natal. Owing to the wide range of climatic conditions in which sugarcane is grown in southern Africa, there are many different external factors that affect sugarcane production, including a range of pests and diseases, frost occurrences and variations in soil water. The objective of this research was to (1) identify a number of important variables that affect cane production in southern Africa, (2) employ suitable models to reflect these variables, and (3) simulate and map the extent and severity of these variables at a high spatial resolution over southern Africa. Such variables include the Eldana saccharina and Chilo sacchariphagus stalk borers, sugarcane rust fungus, heat units with selected base temperatures, frost, soil water content, soil compaction, irrigation water demand, conducive and non-conducive growing conditions, flowering proficiencies for sugarcane, sugarcane yields and yield increments per unit of irrigation. The distribution patterns of the above-mentioned variables relied greatly upon the various models employed to represent them, as well as the accuracy of the temperature and rainfall databases to which the various models were applied. Although not definitive, the models used to reflect the variables which had been identified were considered to be generally satisfactory. The resolution at which the variables which had been identified in this study were mapped, was also found to be adequate. / Thesis (M.Sc.)-University of KwaZulu-Natal, Pietermaritzburg, 2008.
|
Page generated in 0.0698 seconds