Spelling suggestions: "subject:"supramolecular architectures"" "subject:"supramolecular rchitectures""
1 |
Supramolecular helical arrays of highly defined topgraphyBunce, Siona January 2001 (has links)
No description available.
|
2 |
Dynamic platinum(II)- based metallosupramolecular architecturesPike, Sarah Jane January 2012 (has links)
Over the past two decades, transitions metals have been extensively employed towards the construction (using coordination driven assembly) and operation (using reversible metal-ligand switching motifs) of supramolecular architectures. This Thesis details the investigation of an array of dynamic platinum(II)-based metallosupramolecular architectures and includes a series of model studies on switchable platinum(II) coordination modes. Chapter Two describes the synthesis and study of a series of prototype noninterlocked molecular machines. The inherent dynamics of intramolecular metalligand substitution reactions (metallotrophic shifts) are exploited to drive a d8 platinum(II-)-phenanthroline component along different ligating architectures to achieve translational (and in one case rotary) motion of the sub-molecular components. Variable temperature NMR studies of these complexes have established the kinetic parameters for the observed shuttling processes. In Chapter Three, the switchable behaviour of a metal-ligand coordination motif is reported in which a proton input is employed to modify the overall thermodynamic bias and light is orthogonally utilized to selectively lower the energetic barrier for the binding event to re-equilibration. A discussion of the light-promoted ligand exchange reaction is presented, supported by a combination of TD-DFT calculations and kinetic studies. Chapter Four describes the exploitation of this discovered pH-switchable metalligand motif for the stimuli-responsive reversible assembly of two dimensional and three dimensional metallosupramolecular architectures. Whilst Chapter Five details how this reversible motif can be exploited to induce controlled exchange between “3+1” and “2+2” square planar platinum donor sets in response to the application of acid-base stimuli.
|
3 |
Self-assembly of tubular supramolecular architectures via a combination of endo- and exo-recognition processesHeck, James Arthur January 1995 (has links)
No description available.
|
4 |
Molecular Engineering Approaches to Highly Structured MaterialsValiyaveettil, Suresh 01 1900 (has links)
Design and synthesis of novel supramolecular architectures is an interesting area of research in the last two decades. Intermolecular interactions assisted self-assembly of molecular and macromolecular building blocks play an important role in obtaining the desired shape and function of the supramolecular architectures. A combination of the classical covalent synthesis with the self-assembly assisted formation of well-defined architectures (noncovalent synthesis) allows us to develop novel multifunctional materials. Our approach in this area is focused on the design of novel molecular and biomolecular building blocks and the optimization of structure-property relationship of the materials using self-assembly approach. This presentation will focus on our recent efforts on the design and synthesis of polymers and oligopeptides for investigation of the self-assembly and fine-tuning the structure-property relationship. Also, some highlights will be given on our initial investigation on how hard minerals are synthesized by natural molecules through the self-assembly processes. / Singapore-MIT Alliance (SMA)
|
5 |
Self-Assembly Of Discrete Molecular Architectures : Design, Synthesis And CharacterizationGhosh, Sushobhan 08 1900 (has links) (PDF)
Stepwise covalent synthesis of large molecules is often time consuming and laborious and thus generally ends in a low yield of the target product. It is also difficult to achieve a large desired product where the controlling force is a non-directional weak interaction. Instead, by utilizing stronger metal-ligand directional coordination bonding approach, one can easily prepare the desired large molecules using appropriate molecular units. Further attractive feature of this approach is the incorporation of functional groups into final structures to make the assemblies functional. It is found that symmetrical polypyridyl and rigid linkers have been used widely in the construction of finite supramolecules of Pd (II) and Pt(II). Flexible linkers are rarely used since they are less predictable in self-assembly and have a tendency to form undesired polymer. However, flexible linkers may generate pseudo rigid assemblies that can distort their shapes to obtain a more thermodynamically stable conformation for host-guest interactions. Similarly, use of non-symmetric or ambidentate linkers is not explored much. These linkers may generate a mixture of several linkage isomeric products and thus difficult to monitor the reaction. Moreover, isolation of these products in pure form is also a challenging task. On the other hand, recent research revealed that porous polyacetylene organic compounds are suitable sensors for the detection of electron deficient nitroaromatics, which are the chemical signatures of many commercial explosives. Possibility of discrete supramolecules as sensors for these explosives is very less studied. The main thrusts of the present investigation are to incorporate flexible and nonsymmetrical linkers in the construction of finite discrete assemblies of Pd/Pt; and to design appropriate π-electron rich supramolecules as sensors for the detection of electron deficient nitroaromatics.
Chapter 1 of this thesis gives a brief introduction to the supramolecular chemistry. It also gives a brief introduction to the design principle of metal-ligand coordination driven selfassembly approach towards the generation of large architectures.
Chapter 2 reports the synthesis of a series of two-dimensional supramolecular architectures via coordination driven self-assembly of Pt/Pd containing ditopic acceptors and non-symmetrical donor ligands. The use of non-symmetrical donor ligands in coordination driven self-assembly is a challenging task because they may generate a mixture of isomers due to different connectivity of the non-symmetric (ambidentate) linkers. But in all the cases exclusive formation of a single linkage isomer was established. Na-nicotinate was treated with [cis-(dppf)Pd(OTf)2] to yield [(dppf)3Pd3(L3)](CF3SO3)3(H2O)2(MeOH)7(Et2O) as the single linkage isomeric triangle. An analogous treatment using Na-isonicotinate instead of Na-nicotinate yielded a mixture of single isomeric square and triangle with the later one as the major product in solution. Further extension of this study using cis-(tmen)Pd(NO3)2 instead of [cis-(dppf)Pd(OTf)2] also showed the formation of a mixture of square and triangle [tmen = N,N,N’,N’- tetramethylethane-1,2-diamine]. Surprisingly, in both the cases square was the product which was crystallized exclusively in solid state though triangle was the major component in solution. The square-triangle equilibria in both the cases were studied by diffusion ordered NMR spectroscopy (DOSY) and variable temperature multinuclear NMR. Moreover, this chapter reports the incorporation of amide functionality into a Pt(II) nanoscopic molecular rectangle via self-assembly of an organometallic “clip” and a non-symmetric amide ligand.
Chapter 3 presents synthesis of several metallamacrocycles via coordination driven selfassembly using Pd/Pt-P bonding interaction as driving force instead of much widely used Pd/Pt-N bonding interaction. It is also established that Pd/Pt-P bonding interaction is indeed better than the widely used Pd/Pt-N interaction. Several macrocycles were also synthesized by the combination of several Pd containing 90° angular subunits and a bisimidazole ditopic flexible donor. In this case also the bonding interaction between the imidazole and Pd(II) was found to be stronger than the interaction between pyridyl donor and Pd(II).
Chapter 4
describes synthesis of several new Pt2 and Pt3 shape selective organometallic linkers incorporating ethynyl functionality. The Pt2 molecular clip was assembled with several linear dipyridyl linkers to prepare a series of molecular rectangles. In one case N, N’-bis(4-pyridylidene)ethylenediamine was used as donor to create a N4 pocket in the macrocycle. This rectangle was fluorescent in nature and showed efficient fluorescence quenching in solution upon binding of hard transition metal ions (Fe3+, Cu2+ and Ni2+) into the N4 pocket. The non-responsive nature of the fluorescence quenching upon addition of soft metal ions (Zn2+ and Cd2+) containing d10 configuration makes it an interesting example of sensor for transition metal ions. The Pt3 linkers were used in combination with organic clip-type linkers to prepare a series of molecular prisms by [2 + 3] self-assembly (Scheme 1). Incorporation of ethynyl functionality helped to make the resulting supramolecules π-electron rich and luminescent in nature. Possibility of these supramolecules as sensors for the detection of electron deficient nitroaromatics (TNT and picric acid), which are the chemical signatures of explosives has been explored. A complementary approach was also used to prepare trigonal prism using organic tritopic donor and the Pt2 molecular clip.
Chapter 5 presents the design and self-assembly of two new flexible supramolecular nanoballs. These assemblies incorporate two flexible tritopic amide/ester based building blocks and were prepared in excellent yields (96-97%) via coordination driven selfassembly. The first one was resulted from the reaction of four equivalents of a new tritopic ester ligand N, N', N''-tris(4-pyridylmethyl) trimesic ester with three equivalents of C4 symmetric Pd(NO3)2. The second analogous structure was obtained by the selfassembly of the flexible N, N', N''-tris(3-pyridylmethyl)trimesic amide and Pd(NO3)2. The assemblies were characterized with multinuclear NMR spectroscopy, electrospray ionization mass spectroscopy, elemental analysis and TGA. The ester based ball showed the inclusion of NEt4 + in solution. This chapter also describes the exclusive formation of a Pt(II) trigonalbipyramidal (TBP) cage upon the treatment of a Pt(II) 90° acceptor with a new tripodal flexible ligand containing ester functionality. The formation of Pt(II) TBP cage in this case is due to the flexibility of the donor arms of the ligand due to the presence of flexible ester functional group. In continuation of this work, a rigid tripodal ligand 1,1,1-tris(4-pyridyl)COOR with an ester cap [where R = Ph-CH(C2H5)] was assembled with cis-(PEt3)2Pt(OTf)2 to yield a somewhat unusual double-square cage by [4 + 6] self-assembly.
|
6 |
Self-Selection Of Discrete Molecular Architectures In Coordination-Driven Self-AssemblyBar, Arun Kumar 05 1900 (has links) (PDF)
Self–assembly has long been attracting chemists’ attention because it can yield fascinating supramolecular architectures in a single step. More precisely, metal–ligand coordination–driven self–assembly has stood out as an efficient methodology in this paradigm due to simple design principle and high predictability of the final molecular architectures. Moreover, one can envisage hierarchical nanoscopic molecular architectures with a vast range of size, shape and functionality via this methodology.
Two–component self–assembly (involving one type of donor and one type of acceptor) is relatively easy to monitor and a widely used protocol. Whereas, multicomponent self–assembly (involving more than one types of donors/or acceptors) is too complex due to the possibility of formation of several products. The prime advantage of multicomponent self–assembly lies in one–pot construction of topologically complicated multifunctional architectures. Template– induced multicomponent self–assembly of discrete architectures is recently investigated to some extent. But, template–free multicomponent self–assembly of discrete architectures is rare in the literature.
Physico–chemical property of a self–assembled product is coded in the functional groups present in its precursor building units. Functional supramolecular architectures have important applications in many potential fields such as chemosensing, drug delivery, supramolecular catalysis, etc. Porphyrin, pyrazole, imidazole, etc. functionalized organic molecules are hydrophilic as well as hydrophobic in nature. Introduction of such functionality in building units can lead to amphiphilic supramolecular complexes. Therefore, such complexes can be employed as hosts for versatile guests, or as molecular reactors for various chemical reactions. In general, counter ions block the cavity of ionic molecular architectures. Thus, when ionic molecular architectures are employed as hosts, they cannot fully provide their cavity towards guest molecules. In contrast, neutral molecular complexes are expected to be better hosts. It is well known that alkenyl/alkynyl heavy metal complexes exhibit efficient chemoluminescence due to facile metal to ligand charge transfer (MLCT). Hence, such complexes can be employed as efficient chemosensors towards the detection of electron deficient molecules such as nitroaromatics which are the chemical signatures of many powerful explosives. In these regards, a considerable effort is being paid recently to design and construct various functional supramolecular architectures.
Symmetry and rigidity of building units increase predictability of the final product in self– assembly. In this regard, symmetric; rigid Pd(II)/Pt(II)–based acceptors and polypyridyl donors are explored extensively in metal–ligand coordination–driven self–assembly. In contrast to rigidity, flexibility endows building units to adopt thermodynamically most stable conformer/architecture. Hence, same set of building units can render different conformers/architectures in presence of different templates for the sake of suitable host–guest interactions. Contrary to high symmetry, asymmetry in building units leads to molecular architectures with polar environments. But, due to the possibility of formation of several isomeric products from the self–assembly involving such building units, it is difficult to monitor the reaction and purify the products. Hence, designing appropriate synthetic routes which can lead to formation of single isomeric products possessing flexible/asymmetric building units is a challenge to synthetic chemists.
Investigations incorporated in the present thesis are focused to design and construct various 2D/3D discrete supramolecular architectures employing self–assembly of mainly Pd(II)/Pt(II) acceptors with N/O donors. Elemental analyses, IR/NMR/UV–Vis/fluorescence/mass spectroscopy and single crystal X–ray diffraction analysis are among prime techniques employed for characterization of the reported architectures. For a few cases, powder X–ray diffraction (PXRD) analysis and density functional theory (DFT) calculations are also carried out. CHAPTER 1 of the thesis provides a brief general introduction to self–assembly and supramolecular chemistry. It emphasizes on the metal–ligand coordination–driven self–assembly approach towards the construction of a library of 2D/3D supramolecular architectures.
CHAPTER 2 describes formation of a series of template–induced and template–free discrete 3D Pd(II) molecular prisms via multicomponent self–assembly. Because of the possibility of formation of several products, multicomponent self–assembly is difficult to monitor. For example, several molecular architectures are expected from a three–component self–assembly involving a 90° acceptor [ca. cis–blocked Pd(II)], a 120° tritopic donor [ca. benzene–1,3,5– tricaboxylate (tma)] and a 180° donor [ca. 4,4'–bipyridine (4,4'–bpy) or pyrazine (pz)]. Interestingly, treatment of cis–(tmen)Pd(NO3)2 [tmen = N,N,N′,N′–tetramethylethylenediamine] with 4,4'–bpy and K3tma in 6 : 3 : 2 molar ratio at room temperature resulted in mainly a nanoscopic molecular trigonal prism [{(tmen)Pd}6(bpy)3(tma)2](NO3)6 (1) with three 4,4'–bpy pillars, two tma caps and six cis–(tmen)Pd connectors (Scheme 1).
Scheme 1: Schematic representation of the formation of multicomponent self–assembled molecular trigonal prisms 1, 2 and 3.
Surprisingly, the same reaction in presence of benzene–1,3,5–tricaboxylic acid (H3tma) as guest yielded exclusively the guest–encapsulated analogous molecular prism [{(tmen)Pd}6(bpy)3(tma)2(H3tma)2](NO3)6 (2; Scheme 1). It is also presented how variation of steric crowding at connectors (acceptors) influenced final outcomes. Self–assembly of cis– (en)Pd(NO3)2 [en = ethylenediamine] with 4,4'–bpy and K3tma in 6 : 3 : 2 molar ratio at room temperature resulted in a triply interlocked nanoscopic 3D coordination cage [{(en)Pd}6(bpy)3(tma)2]2(NO3)12 (3; Scheme 1). It is also shown that above trend is followed even upon changing the pillar length from 4,4'–bpy to pz. Aromatic –stacking interactions amog tma caps as well as among 4,4'–bpy pillars provided considerable stability to interlocked archirecture 3. Steric crowding due to the methyl groups in cis–(tmen)Pd connectors hindered intercalation and hence led to non–interlocked architecture 1. As expected, similar self–assembly using moderately crowded acceptor cis–(pn)Pd(NO3)2 [pn = 1,2–diaminopropane] with same donors 4,4'–bpy and K3tma resulted in a mixture of analogous triply interlocked and non– interlocked architectures in solution though it was found to be only triply interlocked architecture in solid state. Interestingly, irrespective of the steric crowding of the blocking amines, self– assembly in presence of H3tma as guest preferred exclusive formation of guest–encapsulated prisms of type 2 (Scheme 1). This is due to considerable stabilazation via aromatic –stacking interactions amog tma caps and H3tma guests. Formation of guest–free discrete molecular prisms (such as 1) and triply interlocked coordination cages (such as 3) were confirmed by spectroscopic and single crystal X–ray diffraction analyses. Whereas, formation of guest– encapsulated discrete molecular prisms (such as 2) was established by DOSY, ROESY 2D NMR spectroscpic study in conjunction with energy optimized geometry analysis.
CHAPTER 3 reports design and syntheses of a series of porphyrin functionalized nanoscopic 3D molecular open prisms. Self–assembly of a C4 –symmetric tetratopic donor with a 90° ditopic acceptor can, in principle, lead to several architectures such as trigonal; tetragonal; pentagonal; hexagonal; etc. open prisms, closed cube or 1D oligomers. Both of 1,5,10,15–tetrakis(4–
12
pyridyl)porphyrin (L) and 1,5,10,15–tetrakis(3–pyridyl)porphyrin (L) possess pseudo C4 – 1
symmetry. Surprisingly, treatment of Lwith the 90° ditopic acceptor cis–(dppf)Pt(OTf)2 [dppf = diphenylphosphinoferrocene, OTf = trifluoromethanesulphonate] yielded exclusively an 1
unprecedented [6 + 12] self–assembled hexagonal open prism [(dppf)12Pt12L6](OTf)24 (4; Scheme 2).
Scheme 2: Schematic representation of formation of [6 + 12] self–assembled molecular hexagonal open prism 4 and its Zn(II) embedded complex 4a.
2
In contrast, [3 + 6] self–assembled trigonal open prisms are adopted upon self–assembly of Lwith Pd(II)–based 90° ditopic acceptors. These complexes show facile incorporation of Zn(II) ions into porphyrin N4 –pockets. Moreover, they incorporate high microporosity in solid state and they are amphiphilic in nature due to porphyrin functionality. One of the trigonal open prisms revealed its considerably high adsorbate–adsorbent affinity towards non–polar gas such as N2 and protic solvent vapors such as water, methanol and ethanol. Formation of hexagonal and trigonal open prisms is fully authenticated by spectroscopic and single crystal X–ray diffraction analyses.
CHAPTER 4 describes design and synthesis of a pyrazole functionalized flexible donor (L) and its self–assembly towards the construction of three nanoscopic 3D supramolecular discrete cages 5–7 (Scheme 3).
Scheme 3: Schematic representation of formation of [4 + 6] self–assembled molecular double–square 5 and [2 + 3] self–assembled molecular trigonal bipyramids 6–7. 3
Due to flexibility, Lcan adopt different conformations and hence several isomeric architectures 3
are expected upon self–assembly. For example, self–assembly of Lwith a rigid ditopic 90° acceptor can lead to trigonal bipyramid (TBP), double–square, adamantanoid or truncated 3
tetrahedron. Treatment of Lwith cis–(tmen)Pd(NO3)2 yielded a [4 + 6] self–assembled double–3
square [(tmen)6Pd6L4](NO3)12 (5; Scheme 3). Much to our surprise, replacement of cis– (tmen)Pd(NO3)2 with CuCl2 or AgOTf yielded [2 + 3] self–assembled molecular TBP 33
[Cu3Cl6L2] (6) or [Ag3L2](OTf)3 (7), respectively (Scheme 3).
CHAPTER 5 presents study of self–assembly involving flexible asymmetric donors and rigid 4
symmetric 90° acceptors. Three ambidentate donors 5–pyrimidinecarboxylate (L), nicotinate–56
N–oxide (L) and isonicotinate–N–oxide (L) were employed in self–assembly with symmetric rigid 90° acceptors cis–(dppf)M(OTf)2 [M = Pd(II)/Pt(II)]. Due to flexibility and different 464
connectivity of these donors L–L, several linkage isomers are expected. Treatment of Lwith cis–(dppf)M(OTf)2 in 1 : 1 molar ratio resulted in exclusive formation of single linkage isomeric 4
[3 + 3] self–assembled symmetric molecular triangles [(dppf)3M3L3](OTf)3 (8: M = Pd and 9: M = Pt), where the donors connected to metal centers in head–to–tailfashion (Scheme 4). Similar 56
reactions of Land Lwith cis–(dppf)M(OTf)2 resulted in self–sorting of [2 + 2] self–assembled molecular rhomboids 10–13 (Scheme 4). Exclusive self–selection of single linkage isomeric architectures 8, 9, 10 and 12 was fully established by spectroscopic as well as single crystal X– ray diffraction analyses. Though we could not obtain suitable X–ray diffraction quality single crystals of 11 and 13, exclusive formation of single isomeric [2 + 2] self–assembled rhomboids 131
was established by multinuclear NMR (H and P) in conjunction with ESI–MS spectroscopic studies.
Scheme 4: Schematic representation of formation of complexes 8–13.
Part A of the CHAPTER 6 describes how two neutral organometallic mononuclear chelates are formed upon treatment of disodium fumarate (,–unsaturated dicarboxylate) with cis– (dppf)Pd/Pt(OTf)2 at ambient conditions. Reaction of 90acceptors cis–(dppf)Pd/Pt(OTf)2 with fumarate is expected to result in [4 + 4] self–sorted molecular squares/or [2 + 2] self–sorted
molecular rhomboids (Scheme 5). To our surprise, the above reactions led to an unusual reduction of C–C double bond followed by concomitant formation of mononuclear chelates [M(dppf)(C4H4O4)] (M = Pd for 14 and Pt for 15) via coordination with one of the carboxylate oxygen atoms and –carbon to metal centers (Scheme 5).
Scheme 5: Schematic representation of formation of the complexes 14–15.
Part B of the CHAPTER 6 describes design and synthesis of a novel shape selective “clip” 1
shaped bimetallic Pd(II) acceptor Mand its self–assembly with disodium fumarate to construct a neutral tetrametallic Pd(II) supramolecular rectangle 16 (Scheme 6, left). Similarly, a shape selective 180° bimetallic Pd(II) acceptor was also synthesized and employed in self–assembly with several “clip” shaped organic donors to achieve several cationic tetrametallic Pd(II) supramolecular rectangles.
Scheme 6: Schematic representation of the formation of neutral Pd4 (left) and Pd2 (right) molecular rectangles.
Moreover, synthesis of a neutral bimetallic Pd(II) molecular rectangle 17 via one–pot reaction of trans–(PEt3)2PdCl2 with 1,8–diethynylanthracene (Scheme 6, right) is also presented herein. These –electron rich rectangles exhibit prominent chemoluminescence. Chemosensitivity of these complexes towards the detection of electron deficient nitroaromatics via fluorescence study is also discussed in details in this section.
(Pl refer the abstract file for figures).
|
7 |
Self-Assembly Of Functional Supramolecular Architectures via Metal-Ligand CoordinationShanmugaraju, S 07 1900 (has links) (PDF)
Over the past few decades, supramolecular self-assembly has become an alternative synthetic tool for constructing targeted discrete molecular architectures. Among various interactions, metal-ligand coordination has attracted great attention owing to high bond enthalpy (15−50 Kcal/mol) and predictable directionality. The basic principle of metal-ligand directed self-assembly relies on the proper designing of information encoded rigid complementary building units (a transition metal based acceptor and a multidentate organic donor) that self-recognize themselves in a chemically reasonable way (depends on their bite angle and symmetry) during self-assembly process. As far as acceptor units are concerned, Pd(II) and Pt(II) metal-based cis-blocked 90° acceptors have so far been used greatly for the construction of a library of 2D/3D discrete supramolecular architectures due to their rigid square planar geometry and kinetic lability. However, in some cases the efforts to design finite supramolecular architectures using a cis-blocked 90° acceptor in combination with a bulky donor ligand were unsuccessful, which may be due to the steric demands of donor ligand. Moreover, the resulted assemblies from such cis-blocked 90° building unit are mostly non-fluorescent in nature and limit the possibility of using them as chemosensors for various practical applications.
Unlike that of rigid square-planar Pt(II) and Pd(II)-metal based building blocks, the use of other transition metal-based building units for the construction of discrete nanoscopic molecular architectures are known to lesser extent, mainly because of their versatile coordination geometries. However, some of the half-sandwiched piano-stool complexes of late transition metals like Ru, Os, Ir and Rh are known to maintain the stable octahedral geometry under various reaction conditions. Moreover, the self-assembly using redox active transition metal-based building units may lead to redox active assemblies.
On the other hand, symmetrical rigid donors have been widely used as the favorite choices for the purpose of constructing desired product mainly due to their predictable directionality. Flexible linkers are not predictable in their directionality during self-assembly process and thus results mostly in undesired polymeric products. Furthermore, metal-ligand directed self-assembly provides opportunity to introduce multifunctionality in a single step within/onto the final supramolecular architectures. Among various functional groups, the incorporation of unsaturated ethynyl functionality is expected to enrich the final assemblies to be π-electron-rich and the attachment of ethynyl functionality with heavy transition metal ions are known to be luminescent in nature due to the facile metal to ligand charge transfer (MLCT). Hence, the final supramolecular complexes can be used as potential fluorescence sensors for electron-deficient nitroaromatics, which are the chemical signature of most of the commercially available explosives. The main thrust of the present investigation is focused on the judicious design and syntheses of multifaceted 2D/3D supramolecular architectures of finite shapes, sizes and functionality using Pt(II)/Ru(II) based “shape-selective” organometallic building blocks and investigation of their application as chemosensors.
CHAPTER 1 of the thesis presents a general review on the core concepts of self-assembly and supramolecular chemistry. In particular, it underlines the importance of metal-ligand directional bonding approach for designing a vast plethora of discrete 2D/3D supramolecular architectures with tremendous variation in topology.
CHAPTER 2 describes the design and syntheses of a series of 2D metallamacrocycles using carbazole-functionalized shape-selective 90° building units. A new Pt2II organometallic 90° acceptor 3,6-bis[trans-Pt(PEt3)2(NO3)(ethynyl)]carbazole (M1) containing ethynyl functionality is synthesized via Sonagashira coupling reaction and characterized. The combination of M1 with three different flexible ditopic donors (L1−L3) afforded [2 + 2] self-assembled molecular squares (1−3), respectively [where L1 = 1,3-bis(4-pyridyl)isophthalamide; L2 = 1,3-bis(3-pyridyl)isophthalamide; L3 = 1,2-bis(4-pyridyl)ethane] (Scheme 1).
Scheme 1: Schematic presentation of the formation of a series of [2 + 2] self-assembled molecular squares.
An equimolar (1:1) combination of same acceptor M1 with rigid linear ditopic donors (L4-L5) yielded [4 + 4] self-assembled octanuclear molecular squares 4 and 5, respectively [L4 = 4,4’-bipyridine; L5 = trans-1,2-bis(4-pyridyl)ethylene]. Conversely, a similar reaction of M1 with an amide-based unsymmetrical linear flexible ditopic donor L6 resulted in the formation a [2 + 2] self-sorted molecular rhomboid (6a) as a single product [L6 = N-(4-pyridyl)isonicotinamide]. Despite the possibility of several linkage isomeric macrocycles (rhomboids, triangles and squares) due to different connectivity of the ambidentate linker, the formation of a single and symmetrical molecular rhomboid 6a as an exclusive product is an interesting observation. This chapter also presents the synthesis and characterization of a complementary 90° dipyridyl donor 3,6-bis(4-pyridylethynyl)carbazole (L7). Stoichiometric combination of L7 with several PdII/PtII-based 90° acceptors (M2−M4) yielded [2 + 2] self-assembled molecular “bowl” shaped macrocycles (7−9) respectively, in good yields [M2 = cis-(dppf)Pd(CF3SO3)2; M3 = cis-(dppf)Pt(CF3SO3)2; M4 = cis-(tmen)Pd(NO3)2]. All these newly synthesized macrocycles were characterized by various spectroscopic techniques and molecular structures of some of them were confirmed by single crystal X-ray diffraction analysis. In addition to their syntheses and characterization, fluorescence chemosensing ability for various analytes was investigated.
Macrocycle 1 is a system composed of amide-based receptor units and carbazole-based fluorophore moieties. The fluorescence study of 1 elicited a dramatic enhancement in the fluorescence intensity upon gradual addition of P2O74- anion in DMF/H2O solvent mixture, whereas similar titration under identical condition with other anions like F-, ClO4-, and H2PO4- did not show such change. Hence, molecular square 1 can be used as selective fluorescence sensor for pyrophosphate (P2O74-) anion. Due to their extended π-conjugation, macrocycles 3-4 were used as fluorescence sensors for electron-deficient nitroaromatics, which are the chemical signatures of many commercially available explosives. The fluorescence study showed a marked quenching of initial fluorescence intensity of the macrocycles(3-4) upon gradual addition of picric acid (PA) and they exhibited large fluorescence quenching responses with high selectivity for nitroaromatics among various other electron deficient aromatic compounds tested. As macrocycle 7 has large concave aromatic surface, it was utilized as a suitable host for large convex guest such as fullerene C60. The fluorescence quenching titration study suggested that macrocycle 7 forms a stable ~1:1 host-guest complex with C60 and the calculated association constant (KSV) is 1.0 × 105 M-1.
CHAPTER 3 presents two-component coordination-driven self-assembly of a series of [2 + 2] molecular rectangles and a [2 + 4] self-assembled molecular tetragonal prism. An equimolar combination of pre-designed linear PtII2-acceptors M5−M6 separately with three different “clip” donors (L2, L8−L9) led to the formation of [2 + 2] self-assembled tetranuclear cationic molecular rectangles (10−15), respectively [M5 = 1,4-bis[trans-Pt(PEt3)2(NO3)(ethynyl)] benzene; M6 = 4,4’-bis[trans-Pt(PEt3)2(CF3SO3)(ethynyl)]biphenyl; L8 = 1,3-bis(3-pyridyl)ethynylbenzene; L9 = 1,8-bis(4-pyridyl)ethynylanthracene]. Rectangles 10-15 showed strong fluorescence in solution owing to their extended π-conjugation. Amide-functionalized rectangle 10 was used as a macrocyclic receptor for dicarboxylic acids. Solution state fluorescence study showed that rectangle 10 selectively binds (KSV = 1.4 × 104 M-1) with maleic acid by subsequent enhancement in emission intensity and addition of other analogous aliphatic dicarboxylic acids such as fumaric, succinic, adipic, mesaconic and itaconic acids causes no change in the emission spectra; thereby demonstrated its potential use as macrocyclic receptor in sensor applications. Since rectangle 15 is enriched with π-conjugation, it was examined as a fluorescence sensor for electron-deficient nitroaromatics such as picric acid, which is often considered as a secondary chemical explosive. The fluorescence study of 15 showed a significant quenching of initial emission intensity upon titrating with picric acid (PA) and it exhibited the largest fluorescence quenching response with high selectivity for picric acid.
Scheme 2: Schematic representation of formation of [2 + 4] self-assembled of molecular tetragonal prism.
This chapter also describes two-component coordination [2 + 4] self-assembly of a pyrene-based PtII8 tetragonal prism (16) as shown in Scheme 2, using a newly designed tetratopic organometallic acceptor (M7; 1,3,6,8-tetrakis[trans-Pt(PEt3)2(NO3)(ethynyl)]pyrene) in combination with an amide-based “clip” donor (L2) and propensity of this prism (16) as a selective fluorescence sensor for nitroaromatic explosives has been examined both in solution as well as in thin-film.
CHAPTER 4 reports the synthesis and structural characterization of a series of Ru(II)-based bi-and tetra-nuclear metallamacrocycles and hexanuclear trigonal prismatic cages. In principle, the self-assembly of a “clip” acceptor with an asymmetrical ditopic donor is expected to give two different linkage isomeric (head-to-tail and head-to-head) molecular rectangles because of different bond connectivity of the donor. However, the equimolar combination of half-sandwiched p-cymene binuclear Ru(II)-based “clip” acceptors (M8−M9) and an amide-based ambidentate donor (L6) resulted in the self-sorting of single linkage (head-to-tail) isomeric rectangles 17−18 as only products, respectively [M8 = [Ru2(μ-η4-C2O4)(MeOH)2(η 6-p-cymene)2](CF3SO3)2; M9 = [Ru2(μ- η4-C6H2O4)(MeOH)2(η 6-p-cymene)2](CF3SO3)2]. Molecular structures of these head-to-tail linkage isomeric rectangles were unambiguously proved by single crystal X-ray diffraction analysis. Likewise, the self-assembly of oxalato-bridged Ru(II) acceptor M8 with a rigid dipyridyl “clip” donor L8 yielded a tetranuclear cationic pincer complex 19, while a similar reaction of M8 with an anthracene-functionalized “clip” donor L9 having shorter distance (between their reactive sites) compared to L8 led to the formation of [1 + 1] self-assembled macrocycle 20. This chapter also represents the design and synthesis of two hexanuclear trigonal prismatic cages (21−22) from the self-assembly of a π-electron rich tripyridyl donor (L10; 1,3,5-tris(4-pyridylethynyl)benzene) in combination with binuclear acceptors M8 and M9, respectively (Scheme 3). Formation of these prismatic cages was initially characterized using various spectroscopic techniques and the molecular structure of oxalato-bridged prism 21 was confirmed by single crystal X-ray diffraction analysis. In addition to the structural characterization, the pincer complex 19 and trigonal prismatic cages 21−22 were used as fluorescence sensors for nitroaromatic explosives owing to their large internal porosity and their π-electron rich nature.
Scheme 3: Schematic representation of the formation of [3 + 2] self-assembled trigonal prismatic cage.
CHAPTER 5 covers the syntheses of a few discrete metallamacrocycles using flexible imidazole/carboxylate based donors instead of much widely employed polypyridyl donors. The metal-ligand directed self-assembly of oxalato-bridged acceptor M8 and an imidazole-based tetratopic donor (L11; 1,2,4,5-tetrakis(imidazol-1-yl)benzene) in methanol afforded [2 + 1] self-assembled tetranuclear macrocycle 23. Conversely, the similar combination of L11 with 2,5-dihydroxy-1,4-benzoquinonato-bridged binuclear complex (M9) in 1:2 molar ratio in methanol resulted in an octanuclear cage 24. Both the complexes (23−24) were isolated as their triflate salts in high yields and were characterized by various spectroscopic methods including single crystal X-ray diffraction analysis.
Scheme 4: Schematic representation of formation of an octanuclear incomplete Ru(II) open prism via ruthenium-oxygen coordination driven self-assembly.
This chapter also explains the self-sorting of an unusual octanuclear incomplete prism [Ru8(η6-p-cymene)8(tma)2(μ-η4-C2O4)2(OMe)4](CF3SO3)2 (25) via ruthenium-oxygen coordination driven self-assembly of building block M8 and sodium benzene-1,3,5-tricarboxylate (L12) (Scheme 4). Electronic absorption study indicated that prism 25 exhibited a remarkable shape-selective binding affinity for 1,3,5-trihydroxybenzene (phluoroglucinol) via multiple hydrogen bonding interactions and such shape-selective binding was confirmed by single crystal X-ray diffraction analysis.
(For figures pl see the abstract file)
|
8 |
An Architectural Exploration in Coordination Driven Self-Assembly & Fluorescent Imidazolium Salts as Picric Acid ReceptorsRoy, Bijan January 2016 (has links) (PDF)
Nature has always remained a constant source of inspiration for chemists for synthesizing natural products, mimicking enzymatic reactions or to construct molecular architectures resembling biological assemblies. With the rapid growth of ‘Supramolecular Chemistry’ along with the advancement of the synthetic methodologies, molecular systems with brand new complexities have been synthesized, alongside the efficacy of weak, reversible non-covalent interactions have also been extensively explored. A number of such forces including hydrogen bonding, solvophobic effect, dynamic covalent interactions and metal-ligand coordination have been exploited to assemble the molecular building blocks and stitch them together to construct discrete ‘self-assembled’ architectures integrated with desired functionalities.
Metal-ligand coordination driven self-assembly certainly evolved as one of the most successful approaches for the construction of discrete supramolecular architectures during last two and half decades. The high directionality and reversible nature of certain metal-ligand bonds allow the pre-designing of sophisticated architectures which can be successfully obtained by ‘error corrections’ via a thermodynamically controlled self-assembly process. Numerous aesthetically elegant two dimensional (2D) and three dimensional (3D) metallosupramolecular architectures have been constructed which have been studied for various potential applications including guest encapsulation, catalysis, sensing, optoelectronics, drug delivery, protection of reactive species etc. Construction of such molecular architectures uses symmetric and rigid building blocks which strictly preserves their geometrical coding and thus finally determines the fate of the self-assembly. Pyridyl-based donors have been extensively used due to their well-behaved coordination with transition metal ions. Interestingly, imidazole based donors remained almost unexplored for such purpose mainly due to the rotational flexibility of imidazole moieties owing to the lack of -electron delocalization with the aromatic backbone, which makes pre-designing an architecture extremely difficult. However, this unpredictability can lead to the formation of unprecedented molecular architectures. Furthermore, the conventional rigid ‘acceptors’ used in the ‘directional bonding approach’ always results in the formation of rigid assemblies, which cannot be utilized for the construction of smart molecular machine based applications. In this context, incorporation of restricted rigidity in the building blocks can be a convenient approach to construct versatile and flexible supramolecular architectures. Although flexible donors are quite common in coordination-driven self-assembly, the use of flexible metal acceptor is scarcely Highly symmetric spherical assemblies of square planer Pd(II) and Pt(II) ions are one of the most extensively studied metallosupramolecular architectures owing to their topological similarity with the spherical virus capsids. Unfortunately, none of the reported molecular spheres are soluble in water which restricts their applications in aqueous media. On the other hand, most of the metallosupramolecular architectures cannot be used for redox based applications as the oxidation state of the associated metal ions must be kept unaltered. Although, assemblies constructed mainly by the ferrocene containing acceptors are shown to be exhibiting redox property, the donor inherited redox active metallosupramolecular systems are extremely rare.
Discrete 3D metallosupramolecular cages have been extensively studied as synthetic hosts where the hydrophobic pockets have been utilized as safe shelter for reactive species, for catalyzing chemical transformations, tuning electronic and optical properties of guest molecules, as delivery vehicle for drug molecules etc. However, a major drawback of many such 3D cages is associated with their closed-shell topology, where the large cavities are accessible though relatively much smaller apertures which prevent larger guest molecules to enter inside. So, an interesting finding in this field would be to construct molecular hosts with larger apertures.
Picric acid (PA) is a strong organic acid and like many other polynitroaromatic compounds, it is a powerful explosive. In addition, it has large scale industrial application for the synthesis of dyes and pharmaceuticals. However, PA has potential health hazards and it is a water pollutant owing to its high aqueous solubility. Thus, the development of selective receptors which can efficiently interact with PA and detect it at very lower concentration is an appealing field of research.
Chapter 1 briefly discusses the history of supramolecular chemistry and the concept of ‘self-assembly’ along with the several synthetic methodologies for the construction of discrete supramolecular architectures. It also includes a brief discussion on the various design approaches to construct 2D and 3D molecular architectures by metal-ligand coordination which is followed by an account on some of the important applications of such metallosupramolecular architectures. At the end, a small introduction on the fluorescence-based detection techniques for PA has also been included.
Chapter 2A accounts for the exploration of two linearly substituted benzene bisimidazole donors L1 and L2 for coordination-driven self-assembly. L1 and L2 possesses different ‘natural’ donor angles as the imidazole moieties in L2 are twisted heavily with respect to the phenyl plane due to the steric hindrance exerted by the methyl groups. Interestingly, while the self-assembly of L1 with [cis-(tmeda)Pd(NO3)2] (tmeda = N,N,Nꞌ,Nꞌ-tetramethylethane-1,2-diamine) exclusively formed a [3+3] molecular triangle, the self-assembly of L2 yielded a [4+4] molecular square as the major product with the same acceptor. In addition, similar treatment with the analogous Pt(II) acceptor resulted mixtures of [3+3] and [4+4] assemblies in both cases; however, the [3+3] assembly was the major product in case of L2. These contradictory product distributions in case of L2 with analogous Pd(II) and Pt(II) acceptors could be corroborated by the delicate balance between the entropic and enthalpic contributions.
Scheme 1. Self-assembly of L1/L2 with [cis-(tmeda)Pd(NO3)2] and [cis-(tmeda)Pt(NO3)2], respectively.
Furthermore, the reactions of L1 and L2 with a 0º bisplatinum acceptor, viz. AntPt yielded the expected [2+2] macrocycles (8 and 9), respectively. However, the interesting observations
Scheme 2. Self-assemblies of L1 and L2 with the 0º bisplatinum acceptor AntPt.
obtained from the variable temperature NMR studies suggested the existence of a mixture of inter-convertible conformational isomeric structures of 9.
Chapter 2B describes the synthesis of a novel semi-rigid bisplatinum acceptor bisPt-NO3 based on benzil backbone for the construction of flexible metallamacrocycles. The benzil group was selected due to its unique rotational flexibility along the benzyl C-C bond which can generate a wide range of bite angles to make it compatible with the variety of donors of diverse shapes and sizes. The acceptor was successfully self-assembled with four different bisimidazole donors (L1-L4) to yield corresponding [2+2] metallamacrocycles (M1-M4) which were characterized by multinuclear NMR and ESI-MS spectrometry; and their structures were elucidated by semi-empirical geometry optimizations.
Scheme 3. Self-assembly of [2+2] metallamacrocycles M1-M4 by a semi-rigid bisplatinum acceptor bisPt-NO3.
Chapter 3 discusses the synthesis of the very first example of a water soluble molecular sphere MC-1 by the self-assembly of square planar Pd(II) ions with a flexible cationic tritopic donor La(NO3)3 containing 4,4-bispyridyl arms. The structural flexibility of La(NO3)3 makes it capable of binding with metal ions in its syn- or anti-conformations which was also experimentally observed in the structures of the three newly synthesized coordination polymers, viz. Ag-CP, Zn-CP and Cd-CP constructed by using La(NO3)3 as (co)ligand. Finally, the 4:3 self-assembly of [La(NO3)3] and Pd(NO3)2 in aqueous media produced the desired M6L8 type
Scheme 4. Self-assembly of the water soluble molecular dice MC-1 from the tricationic tritopic donor La(NO3)3.
molecular sphere- MC-1, which contain 36+ overall charges. The compound could be easily solubilized in water after isolation as solid by simple stirring at room temperature. Single crystal X-ray diffraction analysis (SCXRD) revealed the ‘dice’-shaped architecture of MC-1 where the eight faces are occupied by the coordinated Pd2+ ions and the bispyridyl arms and the vertices are occupied by mesityl moieties. MC-1 is stable in aqueous media, however disintegrates in DMSO, as observed by variable temperature NMR experiments. In addition, MC-1 also produced ligand inherited redox signals in cyclic voltammetry experiments.
Chapter 4 describes the synthesis of a novel non-symmetric tetraimidazole donor L based on carbazole backbone. The complexity of the donor is associated with the allowed free rotation of the imidazole moieties along with the non-symmetric nature of the carbazole backbone which make L a very unusual donor for coordination-driven self-assembly. The crystal structure of L showed that the presence of the N-Me group caused a greater twisting of the nearby imidazole moieties with respect to the other set of imidazole moieties. The self-assembly of L with [cis-(en)Pd(NO3)2] (en = ethane-1,2-diamine) yielded a mixture of M4L8 and M6L12 type self-assembled products, as evidenced from the ESI-MS spectrometry. However, the DOSY NMR spectra of the product showed a single diffusion coefficient for all the peaks, indicating that both type of assemblies have similar size and hence suggested the formation of a tetrafacial barrel and
a cubic architecture. A similar self-assembly of L with [cis-(tmeda)Pd(NO3)2] also produced a water soluble product. ESI-MS spectra in this case only confirmed the formation of a M4L8
assembly- MB-1. SCXRD analysis of the coronene encapsulated complex of MB-1 gave more insights on the sophisticated non-symmetric tetrafacial barrel architecture of MB-1 with large
Scheme 5. Construction of the water soluble molecular barrel MB-1 by the self-assembly of a non-symmetric tetraimidazole donor L.
rectangular apertures. The centrosymmetric molecule can encapsulate two aromatic guest molecules inside its hydrophobic cavity and was found to be efficiently encapsulating polyaromatic hydrocarbons (PAHs) in aqueous media. In addition, MB-1 has been successfully exploited to carry water insoluble perylene molecule inside HeLa cells for fluorescence imaging purpose without showing significant toxicity. L also formed a water insoluble tetrafacial barrel (MB-2) by self-assembly with [cis-(dppf)Pd(OTf)] (dppf=diphenylphosphino ferrocene) which interestingly has a symmetrical architecture, as evidenced from the SCXRD analysis. The formation of the symmetrical barrel is driven by the steric hindrance between the bulky phenyl groups of the nearby dppf moieties.
Chapter 5 reports the study of interactions between picric acid (PA) with a few newly synthesized fluorescent imidazolium salts (S1-S3). The fluorescence titration study of the positively charged receptors with PA showed rapid decrease of the corresponding fluorescence intensities upon gradual addition of PA. The Stern-Volmer plots suggested the involvement of both static and dynamic quenching mechanisms which was further supported by fluorescence lifetime measurements, NMR and UV-Vis spectroscopic analyses. The values of the Stern-Volmer constants (Ksv) reflected strong receptor-PA binding. The quenching efficiency calculations in the presence of several other analytes proved that the receptors are highly selective for PA in both aqueous and non-aqueous media. The mode of interactions in solid state was investigated by the crystal structure analysis of the [S1PA] complex. 1H NMR spectra of the same complex indicated strong interaction between the imidazolium moieties of the receptor
Scheme 6. The fluorescent imidazolium salts based receptors S1-S3 and the florescence titration plot for S1 with PA. Inset: the solutions of S1 and (S1+PA) in DMSO under UV light.
with PA in solution; however, no significant interaction of PA with the anthracene moieties was observed in solution as we well as in the solid state. Also the quenching efficiencies and the Ksv values were correlated with the positive charge(s) present on the receptors with the help of two newly synthesized mono-positive receptors S4 and S5.
|
Page generated in 0.1359 seconds