Résumé : Les transferts d’électrons photo-induits et d’énergie jouent un rôle primordial dans un grand nombre de processus photochimiques et photobiologiques, comme la respiration ou la photosynthèse. Une très grande quantité de systèmes à liaisons covalentes ont été conçus pour copier ces processus de transferts. Cependant, les progrès sont, en grande partie, limités par les difficultés rencontrées dans la synthèse de nouveaux couples de types donneurs-accepteurs. Récemment, des espèces utilisant des liaisons non-covalentes, comme les liaisons hydrogènes, les interactions [pi]-[pi], les liaisons de coordination métal-ligands ou encore les interactions électrostatiques sont le centre d’un nouvel intérêt du fait qu’ils soient plus faciles à synthétiser et à gérer pour obtenir des comportements de transferts d’électrons ou d’énergie plus flexibles et sélectifs. C’est dans cette optique que le travail de cette thèse a été mené, i.e. de concevoir des composés auto-assemblés avec des porphyrines et un cluster de palladium pour l’étude des transferts d’électrons photo-induits et d’énergie. Cette thèse se divise en quatre parties principales. Dans la première section, le chapitre 3, deux colorants porphyriniques, soit le 5-(4-carboxylphényl)-10, 15, 20-tristolyl(porphyrinato)zinc(II) (MCP, avec Na+ comme contre-ion) et 5, 15-bis(4-carboxylphényl)-15, 20-bistolyl(porphyrinato)zinc(II) (DCP, avec Na+ comme contre-ion) ont été utilisés comme donneurs d’électrons, et le [Pd3(dppm)3(CO)]2+ ([Pd32+], dppm = (Ph2P)2CH2, PF6‾ est le contre-ion) a été choisi comme accepteur d’électrons. La structure de l’assemblage [Pd32+]•••porphyrine a été élucidée par l’optimisation des géométries à l’aide de calculs DFT. La spectroscopie d’absorption transitoire (TAS) montre la vitesse de transferts d’électrons la plus rapide (< 85 fs, temps inférieurs à la limite de détection) jamais enregistrée pour ce type de système (porphyrine-accepteur auto-assemblés). Généralement, ces processus sont de l’ordre de l’échelle de la ps-ns. Cette vitesse est comparable aux plus rapides transferts d’électrons rapportés dans le cas de systèmes covalents de type porphyrine-accepteur rapide (< 85 fs, temps inférieurs à la limite de détection). Ce transfert d’électrons ultra-rapide (ket > 1.2 × 1013 s-1) se produit à l’état énergétique S1 des colorants dans une structure liée directement par des interactions ioniques, ce qui indique qu’il n’est pas nécessaire d’avoir de forts liens ou une géométrie courbée entre le donneur et l’accepteur. Dans une deuxième section, au chapitre 4, nous avons étudié en profondeur l’effet de l’utilisation de porphyrines à systèmes π-étendus sur le comportement des transferts d’électrons. Le colorant 9, 18, 27, 36-tétrakis-meso-(4-carboxyphényl)tétrabenzoporphyrinatozinc(II) (TCPBP, avec Na+ comme contre-ion) a été sélectionné comme candidat, et le 5, 10, 15, 20-tétrakis-meso-(4-carboxyphényl)porphyrineatozinc(II) (TCPP, avec Na+ comme contre-ion) a aussi été utilisé à des fins de comparaisons. TCPBP et TCPP ont, tous deux, été utilisés comme donneurs d’électrons pour fabriquer des assemblages supramoléculaires avec le cluster [Pd32+] comme accepteur d’électrons. Les calculs DFT ont été réalisés pour expliquer les structures de ces assemblages. Dans les conditions expérimentales, ces assemblages sont composés principalement d’une porphyrine avec 4 équivalents de clusters. Ces systèmes ont aussi été investigués par des mesures de quenching (perte de luminescence), par électrochimie et par d’autres techniques. Les transferts d’électrons (< 85 fs; temps inférieurs à la limite de détection) étaient aussi observés, de façon similaire aux assemblages MCP•••[Pd32+] et [Pd32+]•••DCP•••[Pd32+]. Les résultats nous indiquent que la modification de la structure de la porphyrine vers la tétrabenzoporphyrine ne semble pas influencer le comportement des cinétiques de transferts d’électrons (aller ou retour). Dans la troisième section, le chapitre 5, nous avons synthétisé la porphyrine hautement [pi]-conjuguée: 9, 18, 27, 36-tétra-(4-carboxyphényléthynyl)tétrabenzoporphyrinatozinc(II) (TCPEBP, avec Na+ comme contre-ion) par des fonctionnalisations en positions meso- et β, β-, qui présente un déplacement vers le rouge de la bande de Soret et des bandes Q. TCPEBP était utilisé comme donneur d’électrons pour fabriquer des motifs supramoléculaires avec le [Pd32+] comme accepteur d’électrons. Des expériences en parallèle ont été menées en utilisant la 5, 10, 15, 20-tétra-(4-carboxyphényl)éthynylporphyrinatozinc(II) (TCPEP, avec Na+ comme contre-ion). Des calculs DFT et TDDFT ont été réalisés pour de nouveau déterminer de façon théorique les structures de ces systèmes. Les constantes d’association pour les assemblages TCPEBP•••[Pd32+]x sont les plus élevées parmi tous les assemblages entre des porphyrines et le cluster de palladium rencontrés dans la littérature. La TAS a montré, encore une fois, des processus de transferts d’électrons dans des échelles de l’ordre de 75-110 fs. Cependant, les transferts de retour d’électrons sont aussi très rapides (< 1 ps), ce qui est un obstacle potentiel pour des applications en cellules solaires à pigment photosensible (DSSCs). Dans la quatrième section, le chapitre 6, les transferts d’énergie triplets (TET) ont été étudiés pour les assemblages MCP•••[Pd32+] et [Pd32+]•••DCP•••[Pd32+]. Les analyses spectrales des états transitoires dans l’échelle de temps de la ns-[mu]s démontrent de façon évidente les TETs; ceux-ci présentent des transferts d’énergie lents et/ou des vitesses moyennes pour des transferts d’énergie T1-T1 (3dye*•••[Pd32+] → dye•••3[Pd32+]*) opérant à travers exclusivement le mécanisme de Förster avec des valeurs de kET autour de ~ 1 × 105 s-1 selon les mesures d’absorption transitoires à 298 K. Des forces motrices non-favorables rendent ces types de processus non-opérants ou très lents dans les états T1. L’état T1 de [Pd32+] (~8190 cm-1) a été qualitativement déterminé par DFT et par la mise en évidence de l’émission S0 ← Tn retardée à 680-700 nm provenant de l’annihilation T1-T1, ce qui fait que ce cluster peut potentiellement agir comme un donneur à partir de ses états Tn, et accepteur à partir de T1 à l’intérieur de ces assemblages. Des pertes d’intensités de types statiques pour la phosphorescence dans le proche-IR sont observées à 785 nm. Ce travail démontre une efficacité modérée des colorants à base de porphyrines pour être impliquée dans des TETs avec des fragments organométalliques, et ce, même attachées grâce à des interactions ioniques. En conclusion, les assemblages ioniques à base de porphyrines et de clusters de palladium présentent des propriétés de transferts d’électrons S1 ultra-rapides, et des transferts d’énergie T1 de vitesses modérées, ce qui est utile pour de possibles applications comme outils optoélectroniques. D’autres études, plus en profondeur, sont présentement en progrès. / Abstract : Photoinduced electron and energy transfers play the pivotal role in various photochemical and photobiological redox processes including photosynthesis and respiration. Abundant covalently bonded systems have been designed to mimic the natural electron and energy transfer processes. However, the progress is often interfered by the difficulties to synthesize novel and versatile covalent donor-acceptor pairs. Recently, entities utilizing non-covalent interactions including hydrogen-bonding, [pi]-[pi] stacking, metal-ligand coordination and electrostatic interactions are becoming a hot topic since they are easy to be fabricated and tuned for selective and flexible electron and energy transfer behaviors. In this respect, the work presented in this thesis designed self-assemblies with porphyrins and a palladium cluster for photoinduced electron and energy transfers. It includes four main sections. In the first section, Chapter 3, two porphyrinic dyes, 5-(4-carboxylphenyl)-10, 15, 20-tristolyl(porphyrinato)zinc(II) (MCP, as sodium salt) and 5, 15-bis(4-carboxylphenyl)-15, 20-bistolyl(porphyrinato)zinc(II) (DCP, as sodium salt), were used as electron donors, and [Pd3(dppm)3(CO)]2+ ([Pd32+], dppm = (Ph2P)2CH2, as PF6‾ salt) cluster was adopted as the electron acceptor. The structure of [Pd32+]•••porphyrin assemblies was elucidated by geometry optimization using Density Functional Theory (DFT) calculations. Transient absorption spectroscopy (TAS) indicated a record fast electron transfer rate (< 85 fs, the time resolution limit) among the porphyrin-acceptor self-assemblies. Typically, these occur in ps-ns time scale. This rate is also comparable to the fastest electron transfer rate reported for the covalently linked porphyrin-acceptor systems (~ 50 fs, the time resolution limit). The ultrafast photo-induced electron transfers (ket > 1.2 × 1013 s-1) occurring at the S1 levels of the dyes in the structurally well-defined “straight up” ionic assemblies indicate that it is not necessary to have a strong bond and bent geometry between the donor and acceptor. In the second section, Chapter 4, we further studied the effect of using π-extended porphyrins on the electron transfer behavior of these assemblies. 9, 18, 27, 36-Tetrakis-meso-(4-carboxyphenyl)tetrabenzoporphyrinatozinc(II) (TCPBP, as a sodium salt) was selected as the candidate, and the 5, 10, 15, 20-tetrakis-meso-(4-carboxyphenyl)porphyrinatozinc(II) (TCPP, as a sodium salt) dye was also studied for comparison purposes. TCPBP and TCPP were both utilized as electron donors to fabricate supramolecular assemblies with the [Pd32+] cluster as the electron acceptor. DFT calculations were used to explain the structure of these assemblies. Under the experimental conditions used, these assemblies mainly exist in the form of one porphyrin with four equivalent clusters. These systems were also investigated by quenching measurements, electrochemistry, and other techniques. Ultrafast electron transfers (< 85 fs; time resolution limit) were also observed, which is similar as those for MCP•••[Pd32+] and [Pd32+]•••DCP•••[Pd32+] assemblies. The results indicate the structural modification from porphyrin to tetrabenzoporphyrin does not seemingly influence the kinetic behavior of the forward and back electron transfers. In the third section, Chapter 5, we synthesized a highly [pi]-conjugated porphyrin, 9, 18, 27, 36-tetra-(4-carboxyphenylethynyl)tetrabenzoporphyrinatozinc(II) (TCPEBP, as a sodium salt) by meso- and β, β-bifunctionalization, which exhibits large red shift of the Soret and Q-bands. TCPEBP was utilized as electron donors to fabricate supramolecular motifs with [Pd32+] cluster as the electron acceptor. Parallel experiments were conducted using 5, 10, 15, 20-tetra-(4-carboxyphenyl)ethynylporphyrinatozinc(II) (TCPEP, as a sodium salt). DFT and TDDFT calculations were applied to elucidate the structure of these assemblies. Binding constants for TCPEBP•••[Pd32+]x is the largest one among all the assemblies with porphyrin and palladium cluster. TAS showed again the ultrafast electron transfer process within the 75-110 fs time frame. However, the back electron transfers are also very fast (< 1 ps), which may be a potential obstacle for future applications in dye-sensitized solar cells (DSSCs). In the fourth section, Chapter 6, triplet energy transfers (TET) of the assemblies MCP•••[Pd32+] and [Pd32+]•••DCP•••[Pd32+] were studied. The transient spectral analysis in the ns-[mu]s time scale clearly demonstrates evidence for TET, which shows a slow to medium T1-T1 energy transfer (3dye*•••[Pd32+] → dye•••3[Pd32+]*) operating through a Förster mechanism exclusively with kET values of ~ 1 × 105 s-1 based on transient absorption measurements at 298 K. Unfavourable reductive and oxidative driving forces make this type of process inoperative or very slow in the T1 states. The T1 state of [Pd32+] (~8190 cm-1) has been quantitatively determined by DFT computations and by evidence for a delayed S0 ← Tn emission at 680-700 nm arising from T1-T1 annihilation, which makes this cluster potentially acting as the energy donor from its Tn state, and T1 acceptor within the assemblies. The static quenching of their near-IR phosphorescence at 785 nm was observed. This work demonstrated a moderate efficiency of the porphyrin dye to be involved in TET with an organometallic fragment, even when attached through ionic interactions. Conclusively, ionic assemblies with porphyrins and palladium clusters exhibit ultrafast S1 electron transfer and moderate T1 energy transfer properties, which is useful for possible application as optoelectronic devices. Further research in more depth is in progress.

Pancreatic ductal adenocarcinoma (PDAC) is the most lethal common cancer in the United States: in 2017 there will be around 54,000 new cases and 43,000 patient deaths. (SEER, 2017) The high mortality of PDAC is related to late disease presentation and aggressiveness; nearly 52% of patients present with metastatic disease at the time of diagnosis. (SEER, 2017) Current treatments have marginal improvements on survival, with the most efficacious treatment, gemcitabine and nab-paclitaxel, having a median survival of 12.2 months. (Wu 2018) Failure of current PDAC treatments is attributed to the inefficacy of systemic chemotherapeutics and the development of resistance. (Rahib, 2014) The Dual Endothelin1/Signal PeptideVEGF receptor (DEspR), represents a promising therapeutic target for the treatment of PDAC: it is a highly expressed, specific tumor antigen, which is involved in tumor vasculogenesis and cancer stem cell (CSC) survival. DEspR is a developmentally crucial receptor, responsible for early angiogenesis and neural crest migration, with minimal expression in normal adult tissue. In vitro and in vivo studies of anti-DEspR therapy in PDAC have shown efficacy in decreasing CSC survival, tumor angiogenesis, and improving overall survival in xenograft models of PDAC, with anti-DEspR therapy being a promising candidate for clinical use. Furthermore, anti-DEspR therapy seems to augment chemotherapeutic therapy in vitro and in vivo, suggesting that a DEspR-targeted antibody drug conjugate (ADC) would be highly effective. ADCs are a re-emerging drug class with significant promise. Initial failures of ADCs in clinic were related to poor antigen specificity and failures in drug conjugation chemistry to minimally impact the antibody. To develop our ADC, I have developed a novel method of site-specific conjugation that relies on a novel method of supramolecular assembly. My system employs two specific protein sequences that do not self-interact, and tightly assemble through coulombic and hydrophobic interactions, allowing site-specific, stoichiometric self-assembly. To facilitate stable drug delivery, I have synthesized a novel enzymatically cleavable tyrosine-clickable linker, which prevents drug release prior to tumor delivery. Both further investigation into the efficacy of anti-DEspR therapy, and the development of a stoichiometric, site-specific, stable method for drug loading will provide an advancement in anti-cancer therapy.

Conjugated polymers have attracted much interest as promising alternatives to inorganic semiconductors, due to their low-temperature, solution-based processability, which may provide for low-cost, large-area electronic device fabrication. However, commercialization of polymer-based electronic devices has been restricted owing to low device performance of solidified thin-films. In order to enhance charge transport of polymer semiconductor thin-films, the self-organization of organic polymer semiconductors into ordered supramolecular assemblies has been achieved by tuning a range of process parameters including film deposition method (spin vs. drop cast), solvent boiling point (low vs. high boiling point), polymer-dielectric interface treatment, and post-deposition processing (solvent vapor or thermal annealing). However, these strategies give rise to limitations for large-scale high-throughput processing due to associated pre- and/or post semiconductor deposition steps. Therefore, in this thesis, we identify alternative processing parameters (i.e., hydrogen bonds between good and poor solvents, UV irradiation to polymer precursor solutions, and combination of sonication and subsequent UV irradiation to polymer precursor solutions) which can contribute to enhancement in charge transport of a model polymer semiconductor, poly(3-hexylthiophene) (P3HT), eliminating the additional pre- and/or post-steps mentioned above. Further, we understand of how the processing parameters effect intra- and intermolecular interactions of the polymer chains, micro- through macroscopic morphologies, and charge transport characteristics of the resultant films.

<p>This work examines the characterization of supramolecular assemblies and, more specifically, host-guest complexes involved in molecular recognition events. The supramolecular assemblies studied take root from metal ion delivery in biological uptake pathways, specifically the delivery of iron to microbial cells. These assemblies are studied in an effort to further understand the nature of molecular recognition events, specifically the nature and strength of interactions between a host and a guest, and possible applications of these systems. </p> <p>The development of a mass spectral method by which to characterize supramolecular assemblies involving the cation binding hosts 18-crown-6, benzo-18-crown-6, dicyclohexano-18-crown-6, and dibenzo-18-crown-6 macrocycles, and the linear ionophore lasalocid with cationic guests, including substituted protonated amines and the iron siderophore ferrioxamine B is presented. Methodology was developed using ESI-MS to successfully quantitate host-guest interactions in binary and complex mixtures. Binding constants were obtained in the range of log Ka = 3 - 5 and correspond to similar systems previously studied in the literature. The studies presented here further our understanding of the molecular recognition events that must occur between a siderophore and a receptor and provide an improved method by which to measure the strength of their interaction. </p> <p>The effects of redox hosts on host-guest complex formation with ferrioxamine B and the characterization of the host-guest complexes formed and the strength of the interactions between them were studied using cyclic voltammetry, ESI-MS, FAB-MS and ITC. A shift in redox potential towards more positive values is observed upon addition of a cationic siderophore guest to a solution of a redox-active para-Wurster's aza crown or mono-substituted Wurster's aza crown macrocycle. Mass spectral evidence indicates the formation of a host-guest complex between the cationic siderophore and the redox host. A redox switch mechanism is proposed, whereby the redox state of the host influences the binding affinity between the host and guest and, consequently, host-guest complex formation. These systems offer a unique means by which to modulate the uptake or release of ionic guests from a cavity by using externally controlled methods and can be applied to selective metal ion compartmentalization. </p> <p>Finally, the application of supramolecular assemblies as a tool in the field of drug delivery is presented. The covalent attachment of an antimalarial drug, artemisinin, by our collaborators to a siderophore produced by M. Tuberculosis, mycobactin, facilitates the subsequent delivery of the drug into the microbial cell by taking advantage of the natural biological iron uptake pathway. Here, the molecular recognition event and supramolecular assembly of interest is that occurring between the siderophore-drug assembly and the microbial receptor. Characterization of the siderophore-drug assembly using cyclic voltammetry shows that there is an interaction between the Fe-mycobactin and artemisinin when these are covalently attached in the form of a conjugate. Increased current output is observed due to an intramolecular electron transfer between the two components. Based on these in vitro data, we propose a redox mechanism by which the drug-siderophore conjugate exhibits a therapeutic effect in vivo.</p> / Dissertation

ABSTRACT Structural evolution and its effect on optical absorption/emission behavior of derivative of PPVs upon isothermal heat treatment at elevated temperatures were studied by means of a combination of polarized light microscopy, x-ray diffraction, transmission electron microscopy, ultraviolet-visible spectroscopy, and photoluminescence spectroscopy. The main physical picture drawn from results of this study over a series of PPVs with flexible side-chains may be summarized as the following: (1) They are generally liquid-crystalline in nature, typically biaxially nematic in optical texture but morphologically characterized as of lamellar or hexagonal columnar structure. This is consistent with the nematogenic nature one would expect from the rigid backbone as well as the smectogenic nature one would expect from the aliphatic side-chains. (2) The aggregates formed in solutions and the supramolecular assemblies formed in the bulk state are structurally similar (in terms of the similar level of conjugation), and hence possibly of the same thermodynamic origin. This surfactant-like self-ordering behavior is consistent with the tendency towards segregation between the aromatic, rigid backbone and the aliphatic, flexible side-chains. (3) The collapse of these conjugated polymers with flexible side-chains into aggregates appears to be a general phenomenon upon slow to moderate solvent removal and not limited to the present case of poor solvency power. This is consistent with the strong tendency toward phase separation in rigid rod solutions delineated by Flory some 30 years ago. (4) All the above observations may be explained in terms of lyotropic or thermotropic self-assembly of hairy-rod chains into coiled helical conformation with ellipsoidal cross section for the conjugated backbone as shown schematically in Figure 4-42 and 4-43. The flexible side-chains generally tend to fill the space within the ellipsoidal cylindrical structure. As the side-chain length is increased, the increased Van der Waals attraction among side-chains results in more extended period of helical twist or more straighten backbone conformation, rendering preference of lamellar structure over hexagonal helical structure. (5) As a consequence, supramolecular aggregation is basically enhanced by increased side-chain length or backbone rigidity. This in turn results in more extended conjugation length or more fully developed

In recent years supramolecular chemistry has established as one of the most active fields of science. The most significant feature of supramolecular chemistry is the use of building blocks which reversibly held together by intermolecular forces, electrostatic or H-bonding. Therefore, the synthesis of supramolecular systems using different non-covalent assemblies provides some unique architectures and features which are extremely difficult to be obtained via covalent synthesis. One main application of such influencing supramolecular systems is the preparation of self-healing materials. Among various approaches to self-healing effects, reversible bond formation has become prominent in the last years. To achieve both acceptable mechanical performance and self-healing behaviour from a polymeric material, proper balance between covalent and non-covalent bonding is important. The covalent bonding gives a basic strength to the material while the non-covalent bonding generates self-healing effects in the case of damage. The main aim of this study was to synthesize an organic moiety which is capable of forming supramolecular assemblies in the presence of suitable counterparts, followed by its incorporation on to polymer matrix and investigation of the final properties. For reversible bond forming technique H-bonding is exploited in this work. 4-substituted-2,6-diaminopyridine is selected as the organic moiety as it has a clear DAD (donor-acceptor-donor) structure and thus able to undergo self-association or triple hydrogen bonded complex formation with respective counterparts. Chichibabin reaction was utilised for the synthesis and 4-hydroxy-2,6-diamido pyridine was synthesised as the key compound. Initially different derivatives of 4-hydroxy-2,6 diamino pyridine was synthesized and utilised towards the formation of supramolecular network with a suitable monomeric counterpart. Poly (butadiene-co-maleic anhydride) is used as the base polymer as it has the possibility to introduce non-covalent bonding sites through grafting reactions on the double bonds or on maleic anhydride groups. The free amine group present in the main compound was grafted onto the backbone of poly (butadiene-co-maleic anhydride) via reaction of amine with maleic anhydride group. The main design of supramolecular self-assembly within poly (butadiene-co-maleic anhydride) with a suitable counterpart poly (butadiene-co-maleimide), is prepared and used in this thesis. The miscibility of the two polymers is proven by the presence of a single Tg in the DSC results of the mixture and also by the formation of homogeneous films with no phase separation in AFM. However the formation of hydrogen bonding within the monomer was proven by 1H NMR, IR studies. Further formation of complex between two polymers was established from the results of viscosity. Also the interactions between the complexes exert a distinct influence on the rheological behavior of the blend. Lastly the reversibility of this supramolecular blend was assured by temperature dependent viscosity values. In the final part of this work, bromobutyl rubber (BIIR) is selected as the model elastomer which has vast application in the tire industry; as the inner-liner that holds the air in the tire and also used as rubber stoppers for sealing medicine vials and bottles The bromine functionality can be substituted with an amine group making it more susceptible towards the incorporation of different organic moieties. In this way, the derivative of 2,6-diaminopyridine having a pendant amine group is incorporated in BIIR. As a counterpart uracil is used as its H-bond forming ability with diaminopyridine moieties is well established and supported by different previous research works. The supramolecular network formed between these two monomers help to generate self-healing effects within BIIR rubber. Fig. 2 represents the supramolecular network formed between chains of BIIR. The self-healing effect of the rubber material is examined through the stress-strain experiments where up to 82% healing was observed when heated up to 70 °C. With increasing temperature better healing was observed whereas at room temperature a 40% healing tendency was noticed. It is also interesting to note that the thermal and dynamic mechanical properties of this tailor made self-healing BIIR is identical with sulphur cured conventional BIIR.

This dissertation aims to investigate and correlate structure, dynamics and transport properties of several novel soft materials systems using multiple Nuclear Magnetic Resonance (NMR) methodologies, including solid-state NMR (SSNMR), diffusometry, and imaging, and with the help of X-ray scattering. First, we report the investigation of structure and dynamics of three polymeric membranes: hydroxyalkyl-containing imidazolium homopolymers, poly(arylene ether sulfone) segmented copolymers, and disulfonated poly(arylene ether sulfone) random copolymers using a wide array of SSNMR techniques, including: 1) ¹³C cross-polarization magic angle spinning (CPMAS) with varying cross-polarization (CP) contact time, 2) ¹³C single-pulse magic angle spinning (MAS) with varying delay time, 3) ²³Na single-pulse MAS, 4) two dimensional phaseadjusted spinning sideband (2D PASS), 5) proton spin−lattice relaxation (T₁), 6) rotating frame spin−lattice relaxation (T₁ρ), and 7) center-band-only detection of exchange (CODEX). These various types of SSNMR spectroscopic methods provide a wealth of structural and dynamic information over a wide range of time scales from a few nanoseconds to seconds. We further present a picture of rich structural and transport behaviors in supramolecular assemblies formed by amphiphilic wedge molecules using a combination of ²³Na solid-state NMR, ¹H/²H PFG NMR diffusion, relaxation and grazing-incidence small-angle X-ray scattering. Our results show that the liquid crystalline domains in these materials undergo a transition from columnar to bicontinuous cubic phases with a simple increase in humidity, while the amorphous domain boundaries consist of individual wedge molecules with a significant fraction (~ 10%) of total wedge molecules. Multiple-component diffusion of both wedges and water further confirms the structural and dynamic heterogeneity, with the bicontinous cubic phase being able to facilitate much faster water and ion transport than the columnar phase. We then develop a quantitative approach to probe the migration of two novel “theranostic” polymeric agents (combining “therapeutic” and “diagnostic” functions) into bulk hydrogels using two distinct time-resolved magnetic resonance imaging (MRI) methods. To the best of our knowledge, this is the first work that combines time-resolved MRI experiments to reliably quantify diffusivity of paramagnetic and superparamagnetic nanoparticles in bulk biological media. Our results agree closely with those obtained from fluorescence techniques, yet the capability of our approach allows the analysis of actual nanoparticles diffusion through biogels on mm to cm scales during a range of time periods. Finally, we employ a combination of NMR techniques to obtain a comprehensive understanding of ion clustering and transport behaviors of ionic liquids inside the benchmark ionic polymer Nafion. Spin relaxation shows that anion relaxation is more influenced by the fixed sulfonate groups than cation relaxation. 2D ¹H-¹⁹F heteronuclear Overhauser effect spectroscopy (HOESY) and 1D ¹⁹F¹⁹F selective nuclear Overhauser effect (NOE) spectroscopy confirm our assumption of the formation of ion clusters at low water content in the ionomer. While we observe non-restricted diffusion behavior for cations, anion diffusion is strongly restricted both between domain boundaries and within domains in the absence of water. The restricted anion diffusion can serve as a reliable probe for detailed multiscale structures of the ionomer. / Ph. D.

In recent years supramolecular chemistry has established as one of the most active fields of science. The most significant feature of supramolecular chemistry is the use of building blocks which reversibly held together by intermolecular forces, electrostatic or H-bonding. Therefore, the synthesis of supramolecular systems using different non-covalent assemblies provides some unique architectures and features which are extremely difficult to be obtained via covalent synthesis. One main application of such influencing supramolecular systems is the preparation of self-healing materials. Among various approaches to self-healing effects, reversible bond formation has become prominent in the last years. To achieve both acceptable mechanical performance and self-healing behaviour from a polymeric material, proper balance between covalent and non-covalent bonding is important. The covalent bonding gives a basic strength to the material while the non-covalent bonding generates self-healing effects in the case of damage. The main aim of this study was to synthesize an organic moiety which is capable of forming supramolecular assemblies in the presence of suitable counterparts, followed by its incorporation on to polymer matrix and investigation of the final properties. For reversible bond forming technique H-bonding is exploited in this work. 4-substituted-2,6-diaminopyridine is selected as the organic moiety as it has a clear DAD (donor-acceptor-donor) structure and thus able to undergo self-association or triple hydrogen bonded complex formation with respective counterparts. Chichibabin reaction was utilised for the synthesis and 4-hydroxy-2,6-diamido pyridine was synthesised as the key compound. Initially different derivatives of 4-hydroxy-2,6 diamino pyridine was synthesized and utilised towards the formation of supramolecular network with a suitable monomeric counterpart. Poly (butadiene-co-maleic anhydride) is used as the base polymer as it has the possibility to introduce non-covalent bonding sites through grafting reactions on the double bonds or on maleic anhydride groups. The free amine group present in the main compound was grafted onto the backbone of poly (butadiene-co-maleic anhydride) via reaction of amine with maleic anhydride group. The main design of supramolecular self-assembly within poly (butadiene-co-maleic anhydride) with a suitable counterpart poly (butadiene-co-maleimide), is prepared and used in this thesis. The miscibility of the two polymers is proven by the presence of a single Tg in the DSC results of the mixture and also by the formation of homogeneous films with no phase separation in AFM. However the formation of hydrogen bonding within the monomer was proven by 1H NMR, IR studies. Further formation of complex between two polymers was established from the results of viscosity. Also the interactions between the complexes exert a distinct influence on the rheological behavior of the blend. Lastly the reversibility of this supramolecular blend was assured by temperature dependent viscosity values. In the final part of this work, bromobutyl rubber (BIIR) is selected as the model elastomer which has vast application in the tire industry; as the inner-liner that holds the air in the tire and also used as rubber stoppers for sealing medicine vials and bottles The bromine functionality can be substituted with an amine group making it more susceptible towards the incorporation of different organic moieties. In this way, the derivative of 2,6-diaminopyridine having a pendant amine group is incorporated in BIIR. As a counterpart uracil is used as its H-bond forming ability with diaminopyridine moieties is well established and supported by different previous research works. The supramolecular network formed between these two monomers help to generate self-healing effects within BIIR rubber. Fig. 2 represents the supramolecular network formed between chains of BIIR. The self-healing effect of the rubber material is examined through the stress-strain experiments where up to 82% healing was observed when heated up to 70 °C. With increasing temperature better healing was observed whereas at room temperature a 40% healing tendency was noticed. It is also interesting to note that the thermal and dynamic mechanical properties of this tailor made self-healing BIIR is identical with sulphur cured conventional BIIR.

Les réseaux organiques covalents (COFs) sont des réseaux bidimensionnels et tridimensionnels assemblés seulement par des atomes légers, c’est-à-dire de la première et deuxième rangée du tableau périodique. Ceux-ci ont montré des propriétés de porosité pouvant être exploitées dans le stockage, dans la catalyse et dans la séparation moléculaire. La plupart de ces matériaux ont été obtenus par une réaction finale de condensation, ce qui nuit à leurs cristallisations, donc à l’homogénéité et à la caractérisation détaillée de ces matériaux. Les p-xylylènes de Thiele et Tschitschibabin sont des molécules qui ont suscité l’intérêt pour leurs structures et leurs propriétés magnétiques. Subséquemment, Wittig a démontré que le remplacement des fragments diphénylméthylène par des fragments fluorénylidène sur le p-xylylène de Thiele donne des molécules pouvant s’oligomériser pour former un tétramère. Dans notre étude, nous avons examiné l’assemblage de dérivés fluorénylidène dans le but d’obtenir un COF. Tout d’abord, un dérivé linéaire similaire à ce que Wittig a obtenu a été synthétisé afin de vérifier l’assemblage à partir d’un cœur spirobifluorényle. Ces molécules se sont assemblées en tétramère, comme prévu, et en hexamère. Ces deux résultats ont pu être rationalisés par une étude à l’état solide par diffraction des rayons-X. L’empilement tridimensionnel a également été étudié pour ces deux molécules. Subséquemment, des dérivés tétraédriques ont été synthétisés afin d’étudier leurs assemblages. Un premier dérivé est resté sous sa forme quinoïdale et ne s’est pas assemblé, alors qu’un second dérivé a mené à un dimère partiellement assemblé. La structure de ce dernier suggère la formation d’un polymère linéaire pour ce composé dans le cas où il aurait été possible de l’assembler complètement. / Covalent organic frameworks (COFs) are ordered two-dimensional and three-dimensional frameworks assembled only from light atoms in the first and second rows of the periodic table. These frameworks have shown properties that make them potentially useful in the storage of molecular guests, in catalysis and in separation. COFs are typically obtained by a final condensation reaction, which makes their crystallization difficult and leads to materials that are inhomogeneous and impossible to characterize in detail. The p-xylylenes of Thiele and Tschitschibabin are molecules that have attracted interest because of their structures and magnetic properties. Subsequently, Wittig demonstrated that replacing diphenylmethylene fragments in these structures by fluorenylidene units allowed their oligomerisation to form tetrameric structures. In our study, we have investigated the assembly of fluorenylidene derivatives to obtain COFs. First, a linear derivative similar to that obtained by Wittig was prepared to verify the feasibility of assembly from a spirobifluorenyl core. These compounds were found to oligomerise to form a tetramer, as expected as well as a hexamer. Both results have been rationalized by a study of the crystal structures by X-ray diffraction. The three-dimensional packing has also been analyzed. Subsequently, tetrahedral derivatives were synthesized to study the possibility of analogous assembly leading to COFs. A first derivative was found to remain in its quinoidal form rather than oligomerise and a second derivative resulted in a partially assembled dimer. The structure of the latter suggests that a linear polymer could be formed by a further reaction.

Le 21e siècle est le berceau d’une conscientisation grandissante sur les impacts environnementaux des processus utilisés pour synthétiser des molécules cibles. Parmi les avancées qui ont marqué ces dernières décennies, il est également question de réduction de déchets, de conservation de l’énergie et de durabilité des innovations. Ces aspects constituent les lignes directrices de la chimie verte. De ce fait, il est impératif de développer des stratégies de synthèse dont les impacts environnementaux sont bénins. Dans ce mémoire nous présentons la synthèse, la caractérisation et l’étude des propriétés catalytiques en milieu aqueux d’un ligand composé d’une unité -cyclodextrine native, d’une unité imidazolium et d’une chaine alkyle à 12 carbones. Ce ligand hybride s’auto-assemble dans l’eau sous forme de micelles, permettant ainsi d’effectuer en sa présence des couplages de Suzuki-Miyaura dans l’eau, avec de bons rendements. La fonctionnalisation de la face primaire de la -cyclodextrine par un noyau alkyl-imidazolium, précurseur de ligand de type carbène N-hétérocyclique, a permis le développement d’un système catalytique vert et hautement recyclable. Dans un deuxième temps, nous présentons l’utilisation du même ligand hybride dans des couplages de Heck dans l’eau, démontrant ainsi la versatilité du ligand. / Chemistry keeps evolving in new directions. Research has provided improved methodologies for the design and synthesis of targeted molecules. At the same time, the 21st century is witnessing increasing concern about the environmental impacts of chemical wastes. A new philosophy of chemical research and engineering has emerged, known as «Green chemistry». This concept encourages the design of products, processes and technologies that minimize the use and generation of hazardous substances. Therefore, there is an urge to develop environmentally friendly process to convert molecules into product of interest. In the present thesis, we describe the synthesis, characterization and catalytic properties of a novel alkylimidazolium-modified β-cyclodextrin (-CD). Our strategy was to construct a single amphiphilic bimodal ligand by the combination of a mass transfer unit (-CD), covalently bound to a ligand moiety (alkylimidazolium, an N-heterocyclic carbene (NHC) precursor) for aqueous catalysis. First, we demonstrated that the introduction of a dodecyl chain on the imidazolium moiety attached to the primary face of a native β-CD allows the formation of a highly active micellar self-assembled catalytic system in neat water with remarkable recyclable properties for the Suzuki–Miyaura coupling. In addition, we studied the versatility of this self-assembled bimodal system by performing Heck coupling in neat water.