Αυτή η διπλωματική εργασία πραγματεύεται την διάδοση κρουστικών υπερτάσεων που προκαλούνται από κεραυνικά πλήγματα σε ένα δίκτυο χαμηλής τάσης, στο οποίο βρίσκονται εγκατεστημένοι απαγωγοί υπέρτασης. Σκοπός της διπλωματικής εργασίας είναι η εξαγωγή χρήσιμων συμπερασμάτων σχετικά με την προστασία που παρέχουν οι απαγωγοί σε ένα τέτοιο δίκτυο, μέσω αποτελεσμάτων που θα προκύψουν από προσομοιώσεις. / This diploma thesis deals with the propagation of impulse overvoltages caused by lightning strikes in a low voltage network, which is supllied with surge protective devices (SPDs). The goal of this thesis is the extraction of useful conclusions regarding the protection that SPDs can offer to such a network, by comparing various results that arise from simulations.

<p>The present society is highly dependant on complex electronics systems, which have a low damage threshold level. Therefore, there is a high risk of partial or total loss of the system’s electronics when they are exposed to a thunderstorm environment. This calls for a deep understanding on the mechanism related to the interaction of lightning generated electromagnetic fields with various large distributed/scattered systems. To accurately represent the interaction of lightning electromagnetic fields with electrical networks, it is necessary to have return stroke models capable to reproduce the electromagnetic field signatures generated by a lightning flash. Several models have been developed in the recent past to study the field-to-wire coupling mechanism. The most popular, simple and accurate among the available models is the Agrawal et al. model. On the other hand, ATP-EMTP is a well-known transient simulation package widely used by power engineers. This package has various built-in line models like Semlyen, Marti and Noda setups. There is a difficulty in applying the Agrawal et al. model with the built-in line models of ATP-EMTP, as the voltage source due to the horizontal component of electric field in Agrawal et al. model is in series with the line impedance and not in between two transmission line segments. Furthermore, when the electromagnetic field is propagating over a finite conducting ground plane, the soil will selectively attenuate the high frequency content of the electromagnetic field; causing a change in the field wave shape. A finite conducting ground will also produce a horizontal field component at the ground level. Several approximations are available in the literature to obtain the horizontal electric field; namely the wave-tilt and the Cooray-Rubinstein approximation. Consequently, it is important to investigate the change on the induced voltage signature when the power line is located over a finitely conducting ground. Additionally, to provide protection from lightning induced transients it is necessary to use Surge Protective Devices (SPDs) capable of diverting the incoming transients and provide protection level necessary to avoid damage in the equipment. However, standard test procedures of the SPDs do not take into account sub-microsecond structure of the transients. Therefore, to provide the required protection level to sensitive equipments connected to the low voltage power network, it is essential to understand the response of SPDs subjected to high current derivative impulses. This thesis is aimed to investigate the research problems as addressed above. Special attention will be given to a new proposed return stroke model, a simple circuit approach for efficient implementation of Agrawal et al. model using ATP-EMTP, the effect of the soil conductivity on the lightning induced overvoltage signatures and the response of surge protective devices subjected to high current derivative impulses.</p>

The present society is highly dependant on complex electronics systems, which have a low damage threshold level. Therefore, there is a high risk of partial or total loss of the system’s electronics when they are exposed to a thunderstorm environment. This calls for a deep understanding on the mechanism related to the interaction of lightning generated electromagnetic fields with various large distributed/scattered systems. To accurately represent the interaction of lightning electromagnetic fields with electrical networks, it is necessary to have return stroke models capable to reproduce the electromagnetic field signatures generated by a lightning flash. Several models have been developed in the recent past to study the field-to-wire coupling mechanism. The most popular, simple and accurate among the available models is the Agrawal et al. model. On the other hand, ATP-EMTP is a well-known transient simulation package widely used by power engineers. This package has various built-in line models like Semlyen, Marti and Noda setups. There is a difficulty in applying the Agrawal et al. model with the built-in line models of ATP-EMTP, as the voltage source due to the horizontal component of electric field in Agrawal et al. model is in series with the line impedance and not in between two transmission line segments. Furthermore, when the electromagnetic field is propagating over a finite conducting ground plane, the soil will selectively attenuate the high frequency content of the electromagnetic field; causing a change in the field wave shape. A finite conducting ground will also produce a horizontal field component at the ground level. Several approximations are available in the literature to obtain the horizontal electric field; namely the wave-tilt and the Cooray-Rubinstein approximation. Consequently, it is important to investigate the change on the induced voltage signature when the power line is located over a finitely conducting ground. Additionally, to provide protection from lightning induced transients it is necessary to use Surge Protective Devices (SPDs) capable of diverting the incoming transients and provide protection level necessary to avoid damage in the equipment. However, standard test procedures of the SPDs do not take into account sub-microsecond structure of the transients. Therefore, to provide the required protection level to sensitive equipments connected to the low voltage power network, it is essential to understand the response of SPDs subjected to high current derivative impulses. This thesis is aimed to investigate the research problems as addressed above. Special attention will be given to a new proposed return stroke model, a simple circuit approach for efficient implementation of Agrawal et al. model using ATP-EMTP, the effect of the soil conductivity on the lightning induced overvoltage signatures and the response of surge protective devices subjected to high current derivative impulses.

Το θέμα της παρούσας διπλωματικής εργασίας είναι η μελέτη της συμπεριφοράς απαγωγέων υπερτάσεων (SPD), όταν αυτοί αποτελούν μέρος του εσωτερικού συστήματος αντικεραυνικής προστασίας για μια οικιακή εγκατάσταση. Αρχικά γίνεται μια αναφορά στα αίτια δημιουργίας κρουστικών υπερτάσεων στο δίκτυο διανομής, ενώ στη συνέχεια δίνεται έμφαση στις υπερτάσεις που προκαλούνται από άμεσα ή έμμεσα κεραυνικά πλήγματα στο σύστημα. Στα πλαίσια της μελέτης δημιουργήθηκε ένα μοντέλο προσομοίωσης που αναπαριστά ένα δίκτυο χαμηλής τάσης TN-C-S με δύο πανομοιότυπους οικιακούς καταναλωτές, όσον αφορά τη δομή της εσωτερικής ηλεκτρικής εγκατάστασής τους παρουσία ή μη διατάξεων αντικεραυνικής προστασίας. Σκοπός της προκειμένης μελέτης είναι να δειχθεί η βέλτιστη συνδεσμολογία των διατάξεων προστασίας μέσα σε εσωτερικές ηλεκτρικές εγκαταστάσεις έτσι ώστε να αποτρέπεται η ανάπτυξη επικίνδυνων τάσεων και ρευμάτων για τον άνθρωπο και τον εξοπλισμό της οικιακής εγκατάστασης. / The subject of this project is a study upon the dynamic performance of surge arresters as a part of the internal lightning protection system for a residential electrical installation. At first, a reference about the actions or the natural phenomena that cause surge overvoltages in low voltage systems is given in detail and is followed by an essential theoretical approach on the lighning phenomenon. Both the causes, the consequences and the conditions in which a lightning occurs are being analysed. Furthermore, the characteristics and the qualifications a Lightning Protection System needs to comply with, are given, according to the Greek Standard ΕΛΟΤ-1197 and the European Standards IEC 62305-2, IEC 61643-12. Along with writing this essay, a simulation model using Simulink-Matlab was produced. The model represents a LV TN-C-S system that distributes power to two households with identical internal electrical installation. The aim of the present study is to indicate the optimal connection of the surge protective devices (SPDs) in the domestic electrical installation in order to prevent the appearance of potentially dangerous overvoltages to the humans or to the household equipment.