Surrogate-model-based optimization is widely used to solve black-box optimization problems if the evaluation of a target system is expensive. However, when the optimization budget is limited to a single or several evaluations, surrogate-model-based optimization may not perform well due to the lack of knowledge about the search space. In this case, transfer learning helps to get a good optimization result due to the usage of experience from the previous optimization runs. And if the budget is not strictly limited, transfer learning is capable of improving the final results of black-box optimization. The recent work in surrogate-model-based optimization showed that using multiple surrogates (i.e., applying multi-surrogate-model optimization) can be extremely efficient in complex search spaces. The main assumption of this thesis suggests that transfer learning can further improve the quality of multi-surrogate-model optimization. However, to the best of our knowledge, there exist no approaches to transfer learning in the multi-surrogate-model context yet. In this thesis, we propose an approach to transfer learning for multi-surrogate-model optimization. It encompasses an improved method of defining the expediency of knowledge transfer, adapted multi-surrogate-model recommendation, multi-task learning parameter tuning, and few-shot learning techniques. We evaluated the proposed approach with a set of algorithm selection and parameter setting problems, comprising mathematical functions optimization and the traveling salesman problem, as well as random forest hyperparameter tuning over OpenML datasets. The evaluation shows that the proposed approach helps to improve the quality delivered by multi-surrogate-model optimization and ensures getting good optimization results even under a strictly limited budget.:1 Introduction 1.1 Motivation 1.2 Research objective 1.3 Solution overview 1.4 Thesis structure 2 Background 2.1 Optimization problems 2.2 From single- to multi-surrogate-model optimization 2.2.1 Classical surrogate-model-based optimization 2.2.2 The purpose of multi-surrogate-model optimization 2.2.3 BRISE 2.5.0: Multi-surrogate-model-based software product line for parameter tuning 2.3 Transfer learning 2.3.1 Definition and purpose of transfer learning 2.4 Summary of the Background 3 Related work 3.1 Questions to transfer learning 3.2 When to transfer: Existing approaches to determining the expediency of knowledge transfer 3.2.1 Meta-features-based approaches 3.2.2 Surrogate-model-based similarity 3.2.3 Relative landmarks-based approaches 3.2.4 Sampling landmarks-based approaches 3.2.5 Similarity threshold problem 3.3 What to transfer: Existing approaches to knowledge transfer 3.3.1 Ensemble learning 3.3.2 Search space pruning 3.3.3 Multi-task learning 3.3.4 Surrogate model recommendation 3.3.5 Few-shot learning 3.3.6 Other approaches to transferring knowledge 3.4 How to transfer (discussion): Peculiarities and required design decisions for the TL implementation in multi-surrogate-model setup 3.4.1 Peculiarities of model recommendation in multi-surrogate-model setup 3.4.2 Required design decisions in multi-task learning 3.4.3 Few-shot learning problem 3.5 Summary of the related work analysis 4 Transfer learning for multi-surrogate-model optimization 4.1 Expediency of knowledge transfer 4.1.1 Experiments’ similarity definition as a variability point 4.1.2 Clustering to filter the most suitable experiments 4.2 Dynamic model recommendation in multi-surrogate-model setup 4.2.1 Variable recommendation granularity 4.2.2 Model recommendation by time and performance criteria 4.3 Multi-task learning 4.4 Implementation of the proposed concept 4.5 Conclusion of the proposed concept 5 Evaluation 5.1 Benchmark suite 5.1.1 APSP for the meta-heuristics 5.1.2 Hyperparameter optimization of the Random Forest algorithm 5.2 Environment setup 5.3 Evaluation plan 5.4 Baseline evaluation 5.5 Meta-tuning for a multi-task learning approach 5.5.1 Revealing the dependencies between the parameters of multi-task learning and its performance 5.5.2 Multi-task learning performance with the best found parameters 5.6 Expediency determination approach 5.6.1 Expediency determination as a variability point 5.6.2 Flexible number of the most similar experiments with the help of clustering 5.6.3 Influence of the number of initial samples on the quality of expediency determination 5.7 Multi-surrogate-model recommendation 5.8 Few-shot learning 5.8.1 Transfer of the built surrogate models’ combination 5.8.2 Transfer of the best configuration 5.8.3 Transfer from different experiment instances 5.9 Summary of the evaluation results 6 Conclusion and Future work

This thesis covers the process of automating the design of coolant nozzles used for cylindrical grinding. Coolant nozzles are used to supply coolant, an oil and water mixture used to cool the metal workpiece and lubricate the grinding wheel. In the automotive industry, grinding is used to reduce the surface roughness of the workpiece. However, a large amount of heat is generated, risking the heat treatment of the steel to be compromised, for this, coolant is supplied to minimize the heat caused by friction. A nozzle is used, aiming a jet to the zone that generates heat. Commonly used nozzles are adjustable, leading to variation in cooling performance if misaligned. The design of fixed nozzles is developed in this thesis to reduce variation and automatise the design for multiple applications. The automatically designed nozzles are fused deposition modeled and tested. The design automation tool is tested repeatedly and improved successively in the span of the thesis. This lead to a great extent of implementation of design automation. Which lead to a facilitation in reaching of the work zone and avoid obstacles. Also, the tool managed to create nozzle tubes for a multitude of machines. The tool is able to generate, aim, orient, and individually dimension multi-nozzle tubes. Design of Experiment methodology is implemented to find nozzle designs with improved velocity and flow rate and minimize the air mixture with the coolant. Several nozzle designs are tested and fitted into a surrogate model that is, in turn, optimized. The results of the tests led to a greater understanding of how the nozzle geometry restricts the flow rate when attempts of reaching higher velocities of the coolant jet are made. The surrogate models created, also made it possible to find the range of designs which best suits different applications, whereby a Pareto front was able to be populated with a range of different designs alternating in flow rate, velocity and coherency ratio.