Switched Reluctance Machine (SRMs) are receiving significant attention for industries and homes in the last decade. Due to their rugged brushless design, high reliable and an outstanding performance over a wide speed range. The stator and rotor of an SRM have a double salient pole and the rotor has no windings and magnets, its torque generating is quite nonlinear and has high torque ripple. Therefore, sophisticated switching and control technologies are needed to improve its driving performance. The cost and performance of SRM drives are highly dependent on the converter topologies and motor structure, so that developments in the convert topologies have been made in parallel with motor design. The objective of this thesis is proposed three phase Switched Reluctance Machine using a fly back resistor C Dump Converter to replace the tradition Bridge Converter. It can reduce switching losses, to reduce converter production cost with a simpler circuit. At the end, a digital signal processor based control system is used to test the laboratory make drives .